A small footprint guitar interface that cuts out the hum but keeps the parts that are hummable.
The engineering brains at Waves and Paul Reed Smith guitars have put their heads together to create this high-quality interface which transforms your unbalanced high impedance guitar signal into a balanced low impedance signal, reducing hum and retaining your full dynamic range. The result is ultra-high fidelity at the most critical point in the signal path. The compact black box features studio-grade jacks, a large Gain knob, LED indicators for level, low battery, and power. It's transparent pre-amp and custom-designed circuitry are just what you need when you're ready to lay down your hot new guitar licks.
With our
Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!
Waves PRS Guitar Interface Features:
- Transparent pre-amplifier
Custom-designed circuitry
Audiophile-quality components
Studio-grade balanced and unbalanced jacks (one XLR and 1/4" TS jack each)
Micorophone/line level outputs
Gain knob
LED lights to indicate signal present, nominal level, and over
Waves PRS Guitar Interface Specifications:
- Dimensions: 9.5cm (W) x 4.3cm (H) x 11.5cm (D)
Weight: 356g
TRS input
Input impedance: >1 Mega Ohm unbalanced
Max input level: 1.1 VRMS.
Power saving switch: Automatic shut down when input jack is not connected
Balanced XLR input
All measurements were performed with volume at a nominal setting
Output impedance: 50 ohm
S/N: >105 at line level, (S measured at 1%, 1kHz, A-weighted)
Response: 20-20kHz, -3dB @ 11kHz, -5dB at 20kHz
THD+N: <0.005 (< -90dB) at -10dB below max sensitivity level
Sensitivity: 1.1Vrms at line level, 2.5 Vrms at mic Level
Gain: 11dB at line level, -28dB at mic level. ±1.5dB
Volume range: +5dB, -10dB refer to nominal setting
Output short circuit protection: Ground lift switch
Power: Two 9V Batteries, 12-18V DC, 0.5A minimum
Unbalanced PL Jack output
All measurements were performed with volume at a nominal TD setting
Output impedance: 50 ohms
Output impedance: 100 ohms
S/N: >105 at line level, (S measured at 1%, 1kHz, A-weighted)
Response: 20-20Khz, -3dB at 11kHz, -5dB at 20kHz
THD+N: <0.005 (< -90dB) at -10dB below max sensitivity level
(Based on 
Based on 
