The interaction between your guitar and your DAW just got easier.

The Waves GTR PRO Pack was created to help you take total advantage of Waves' GTR3 guitar amp and effects modeling software. Also works with other programs while packing a quality audio interface with a versatile foot controller,

PRS Interface The engineering brains at Waves and Paul Reed Smith guitars have put their heads together to create this high-quality interface. The GTR PRO transforms your unbalanced high impedance guitar signal into a balanced low impedance signal, reducing hum and retaining your full dynamic range.

The result is ultra-high fidelity at the most critical point in the signal path. The compact black box features studio-grade jacks, a large Gain knob, LED indicators for level, low battery, and power. It's transparent pre-amp and custom-designed circuitry are just what you need when you're ready to lay down your hot new guitar licks.

GTR Ground
With 11 assignable buttons, dual dedicated expression pedals, and easy-to-see LED displays, GTR Ground puts the power of sound structure at your feet. Conceived and engineered to interface seamlessly with Waves GTR3, Ground is the perfect fit for the studio or the stage, allowing you to switch between effects chains and A/B setups, activate and bypass individual stomps, and tune up or switch modes with ease, and adjust parameters with a simple toe tap. It includes a USB 1.1 port for simple plug-and-play functionality so you can have better MIDI control and use the GTR plug-ins with your host application whether it be a live or recording situation.

Waves GTR PRO Pack Native Features:

PRS Interface
Transparent pre-amplifier
Custom-designed circuitry
Audiophile-quality components
Studio-grade balanced and unbalanced jacks (one XLR and 1/4" TS jack each)
Micorophone/line level outputs
Gain knob
LED lights to indicate signal present, nominal level, and over
GTR Ground
11 assignable buttons
2 dedicated expression pedals
Pick your presets with the tap of a toe
Switch between effects chains and A/B setups
Activate and bypass individual stomps
Can work as a standalone, or to control the Waves GTR plug-in or other MIDI devices
Tap Tempo Delay and other effects
Tune up or switch modes with ease
Adjust parameters in realtime
Pedal control for Wah, Volume, and more
USB 1.1 port for hooking up to your studio workstation or laptop for live situations
One year limited manufacturer's warranty

Waves GTR PRO Pack Native Specifications:

PRS Guitar Interface
Dimensions: 9.5cm (W) x 4.3cm (H) x 11.5cm (D)
Weight: 356g

TRS input
Input impedance: >1 Mega Ohm unbalanced
Max input level: 1.1 VRMS.
Power saving switch: Automatic shut down when input jack is not connected

Balanced XLR input
All measurements were performed with volume at a nominal setting
Output impedance: 50 ohm
S/N: >105 at line level, (S measured at 1%, 1kHz, A-weighted)
Response: 20-20kHz, -3dB @ 11kHz, -5dB at 20kHz
THD+N: <0.005 (< -90dB) at -10dB below max sensitivity level
Sensitivity: 1.1Vrms at line level, 2.5 Vrms at mic Level
Gain: 11dB at line level, -28dB at mic level. ±1.5dB
Volume range: +5dB, -10dB refer to nominal setting
Output short circuit protection: Ground lift switch
Power: Two 9V Batteries, 12-18V DC, 0.5A minimum

Unbalanced PL Jack output
All measurements were performed with volume at a nominal TD setting
Output impedance: 50 ohms
Output impedance: 100 ohms
S/N: >105 at line level, (S measured at 1%, 1kHz, A-weighted)
Response: 20-20Khz, -3dB at 11kHz, -5dB at 20kHz
THD+N: <0.005 (< -90dB) at -10dB below max sensitivity level

PRS Interface
System Requirements
Windows XP SP2 (Home and Pro), Mac OS-X 10.4 or higher
USB 1.1 or USB 2 port
Input: 100Vac-240Vac
Output: 12V±10%, 5A
Dimensions: 7.67"W x 3.93"H x 30.16"D
Weight: 9.26 lbs.