Skip to main content Skip to footer
Call and save 18% off a single item $49 or more, now thru Dec. 18

Urei 1605 DJ Club Mixer

Item #: 
1274741969669123996
  • Write a Review

The UREI 1605 installation mixer provides a fully featured control center for clubs and performing DJs. With legendary UREI sound quality, stunning looks and Soundcraft's exacting manufacturing constr... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email

Recommended Products
Overview

The UREI 1605 installation mixer provides a fully featured control center for clubs and performing DJs. With legendary UREI sound quality, stunning looks and Soundcraft's exacting manufacturing construction, the 1605 is set to become the new standard in clubs worldwide.

Customize the 1605 to your DJ booth

The 1605 offers many user-friendly features for the club installer/sound engineer--most notably a rotatable rear connector for tabletop or rackmount installation, input and output gain controls to configure the mixer to your set up, flexible connectivity for a range of inputs, external mute function and Soundcraft professional input/output connectivity for unrivaled sound quality.

The 1605 also offers the DJ many pro features, making life as a club DJ that much easier. Most notable is the huge range of input possibilities (including convenient top panel aux in connectors), fx send and return, super smooth 3-band isolator EQ, ultra-clear LED level monitoring, flexible and unique monitoring features within both the booth controls and the headphone monitoring and--of course--the famous Urei sound.

Channel inputs
Mic inputs are on balanced XLR connectors, while RIAA and line inputs are provided on unbalanced RCA phono connectors. A 1/4" TRS insert jack is provided in the mic path of channel 1 to allow connection of external processing.

Booth output
The booth output is provided on both balanced XLR and unbalanced RCA phono connectors, and is controlled by the master booth level control. A Mic Defeat switch mutes the signal from the mic to the booth output to avoid feedback.

Master output
The master output is provided on both balanced XLR and unbalanced RCA phono connectors, and is controlled by the master level control. A separate 1/4" jack feeds a balanced mono sum of the master output signal.

Aux/FX loop
The send-and-return Aux/FX loop is supplied on unbalanced RCA phono connectors, and works in conjunction with the top panel Aux/FX level and routing controls.

Phones section
The front panel illuminated headphone output is supplied on both 1/4" jack and 3.5mm mini-jack connectors for total flexibility.

External mute function
This contact port will mute all music channels except Mic input 1, to allow PA announcements. Useful for fire alarm systems.

Power supply
The high-quality internal PSU is fed via an IEC mains inlet, allowing a detachable mains cable to be used. A cable retaining clip provides total cable security. Universal power supply 100V - 240V AC. Consumption 50W max.

FEATURES

  • 7 Full-function stereo channels
  • Mic, phono and Line connections on each input
  • Switchable phono inputs
  • Rotatable rear panel for easy cable access
  • 3-band EQ on Channel 1 (Mic) +/-12dB
  • 3-band ISOLATOR EQ on channels 2-7, isolating from full cut to +6dB
  • 1 Aux send per channel
  • Comprehensive CUE/Monitoring system, - Aux Send can be CUE'd to headphones, Aux Return can be CUE'd to headphones
  • Headphone output on 1/4" and Mini-jack connectors
  • EQ on headphone output
  • Booth & Master Outputs on XLR, balanced and RCA, unbalanced
  • EQ mute function and L/R/stereo output selector
  • Separate master mono output
  • High Pass filter
  • Balance control on master output
  • Master and booth output mono switching
  • DJ Mic (channel 1 only) to booth output defeat switch
  • Tri-color LED signal/beat/peak metering
  • Split Cue Headphone switch
  • Cue and Mix headphone switch
  • 10-segment LED output metering
SPECIFICATIONS
  • INPUT AND OUTPUT LEVELS
  • CD/Line: 20Hz-20kHz (+/-0.5dB)
  • Phono: 20Hz-20kHz (+/-1.5dB/RIAA)
  • Mic [Line]: 20Hz-20kHz (+/-2dB) [20Hz-20kHz (+/-0.5dB)]
  • Aux/FX Return: 20Hz-20kHz (+/-0.5dB)
  • INSERT SEND (unbalanced, Ch1 only)
  • CD/Line: 90dB
  • Phono: 75dB
  • Mic [Line]: 70dB [90dB]
  • Aux/FX Return: 90dB
  • INSERT RETURN (unbalanced, Ch1 only)
  • THD <0.02%
    Crosstalk 80dB
  • PHONO/LINE INPUT (unbalanced)
  • CD/Line: -12dBu/22kOhms
  • Phono: -52dBu/47kOhms
  • Mic [Line]: -52dBu/3kOhms [-12dBu/22kOhms]
  • Aux/FX Return: -12dBu/22kOhms
  • REAR PANEL CONNECTOR CONNECTIONS
  • XLR INPUT & OUTPUT: (3 pin female XLR) Pin 1 Ground, Pin 2 Signal Hot, Pin 3 Signal Cold
  • INSERT SEND and RETURN (1/4" TSR Jack) MIC 1 & 2 Only: Tip Send, Ring Return, Sleeve Ground
  • PHONO and 1/4" JACKS: Tip Hot, Sleeve Screen
  • HIGH PASS FILTER: 18dB/Octave @ 63Hz
  • MASTER/BOOTH OUTPUT
  • Output Impedance: 75 ohms
  • Recommended Load: 600 ohms or greater
  • Frequency Response: +/- 1dB, 20Hz-20kHz
  • Distortion: < 0.05% THD, 20Hz-20kHz @ +16dbu
    Maximum Output: +20dB into 600 ohms
  • HEADPHONE OUTPUT
  • Output Impedance: <40 ohms
    Recommended Load: 150 ohms or greater
  • Frequency Response: +0, -1dB, 20Hz-20kHz into 200 ohms load
  • Distortion: < 0.05% THD, 20Hz-20kHz @ +16dBu
    Maximum Output: 190mW into 150 ohms
  • MONO OUTPUT
  • Output Impedance: 75 ohms
  • Recommended Load: 2kOhms or greater
  • Frequency Response: +/- 1dB, 20Hz-20kHz
  • Distortion: < 0.05% THD, 20Hz-20kHz @ +16dBu
    Maximum Output: +20dBu into 2kOhms
  • EFFECTS LOOP OUTPUT
  • Output Impedance: 75 ohms
  • Recommended Load: 5k ohms or greater
  • Frequency Response: +/- 1dB, 20Hz-20kHz
  • Distortion: < 0.05% THD, 20Hz-20kHz @ +16dBu
    Maximum Output: +20dB into 2kOhms
  • NOISE
  • All channels routed at unity, mix at unity: < -85dB
    Crosstalk (@1kHz): < -85dB
  • CHANNEL MUTE
  • Fader Cut-off (rel. 0 Mark): < -95dB
    FX Sends offness: < -90dB
  • INPUT AND OUTPUT IMPEDANCE
  • Mic Input: 2kOhms
  • Line Input: 45kOhms
  • Aux Input (Unbalanced RCA Phono) : 30kOhms
  • Master/booth Output: 75 ohms
  • Aux Output: 75 ohms
  • Headphones Output: 40 ohms
  • MAXIMUM OUTPUT LEVELS
  • Insert Send Output: +20dBu into 2kOhms
  • Mix Output: +20dBu into 600Ohms
  • Aux Output: +20dBu into 2k
  • Booth Output: +20dBu into 600 ohms
  • Headphones Output: +20dBu into 300 ohms
  • Headphones: 190mW into 150 ohms
  • DIMENSIONS/ WEIGHT
  • Without rack ears: 87.6(H) x 440(W) x 400(D) (mm)
  • With rack ears: 87.6(H) x 483(W) x 400(D) (mm)
  • Weight: 8.7kgs/ 19.1 lbs
Pro Coverage
MANUFACTURER'S WARRANTY
WARRANTY

1 Soundcraft is a trading division of Harman International Industries Ltd. End User means the person who first puts the equipment into regular operation. Dealer means the person other than Soundcraft (if any) from whom the End User purchased the Equipment, provided such a person is authorised for this purpose by Soundcraft or its accredited Distributor. Equipment means the equipment supplied with this manual.

2 If within the period of twelve months from the date of delivery of the Equipment to the End User it shall prove defective by reason only of faulty materials and/or workmanship to such an extent that the effectiveness and/or usability thereof is materially affected the Equipment or the defective component should be returned to the Dealer or to Soundcraft and subject to the following conditions the Dealer or Soundcraft will repair or replace the defective components. Any components replaced will become the property of Soundcraft.

3 Any Equipment or component returned will be at the risk of the End User whilst in transit (both to and from the Dealer or Soundcraft) and postage must be prepaid.

4 This warranty shall only be available if:

a) the Equipment has been properly installed in accordance with instructions contained in Soundcraft's manual; and
b) the End User has notified Soundcraft or the Dealer within 14 days of the defect appearing; and
c) no persons other than authorised representatives of Soundcraft or the Dealer have effected any replacement of parts maintenance adjustments or repairs to the Equipment; and
d) the End User has used the Equipment only for such purposes as Soundcraft recommends, with only such operating supplies as meet Soundcraft's specifications and otherwise in all respects in accordance Soundcraft's recommendations.

5 Defects arising as a result of the following are not covered by this Warranty: faulty or negligent handling, chemical or electro-chemical or electrical influences, accidental damage, Acts of God, neglect, deficiency in electrical power, air-conditioning or humidity control.

6. The benefit of this Warranty may not be assigned by the End User.

7. End Users who are consumers should note their rights under this Warranty are in addition to and do not affect any other rights to which they may be entitled against the seller of the Equipment.


  • Customer Reviews
Loading....
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.