Skip to main content Skip to footer
15% off single item of $79 or more

Urei 1603 DJ Club Mixer

Item #: 
  • Write a Review

The Urei 1603 DJ Club Mixer provides a fully featured control center for clubs and performing DJs. With the legendary Urei sound quality, stunning looks and Soundcraft's exacting manufacturing constru... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email

Recommended Products

The Urei 1603 DJ Club Mixer provides a fully featured control center for clubs and performing DJs. With the legendary Urei sound quality, stunning looks and Soundcraft's exacting manufacturing construction, they are set to become the new standard in clubs worldwide. No club mixer has been designed to allow total integration with the club sound system while offering the pro DJ all the necessary tools of the trade.

The 1603 offers many user-friendly features for the club installer/sound engineer - most notably; a rotatable rear connector for table top or rack mount installation, input and output gain controls to configure the mixer to your set up, flexible connectivity for a range of inputs, external mute function AND Soundcraft professional input /output connectivity for unrivaled sound quality.

The 1603 also offers the DJ many pro features making life as a club DJ that bit easier - most notably; the huge range of input possibilities (including convenient top panel AUX in connectors), FX send and return, super-smooth 3-band isolator EQ, ultra clear LED level monitoring, flexible and unique monitoring features within both the booth controls and the headphone monitoring AND of course the famous Urei sound.


  • 4 Full-function stereo channels
  • Each has inputs selectable from Mic, Phono and Line connections
  • Phono inputs are switchable to become Line level, individually
  • Mic insert on channel 1 for ease of connecting external processing
  • Rotatable rear panel allows connectors to be located on the rear or underneath of the console (for best cable access)
  • External mute function mutes all channels except mic channel 1 to allow PA announcements but mutes music
  • 3-band EQ on Channel 1 (Mic) +/-12dB
  • 3-band ISOLATOR EQ on channels 2-7, isolating from full cut to +6dB
  • 1 Aux send per channel: - Channel sends switchable pre/post fader individually; Aux Return conveniently located on top panel and can be assigned to crossfader
  • Comprehensive CUE/Monitoring system, - Aux Send can be CUE'd to headphones, Aux Return can be CUE'd to headphones
  • VCA-based crossfader reduces fader noise and allows fully variable control curves for total control of crossfade mixing style
  • Headphone output on 1/4" and Mini-jack connectors
  • EQ on headphone output
  • Booth and Master Outputs on XLR, balanced and RCA, unbalanced
  • Comprehensive booth controls - EQ, mute function and L/R/stereo output selector
  • Separate master mono output
  • High Pass filter on Master and booth outputs eliminates stage or turntable rumble
  • Balance control on Master output
  • Master and booth Output Mono switching
  • Dj Mic (channel 1 only) to booth output defeat switch
  • Tri-colour LED shows Signal/Beat/Peak metering
  • Split Cue Headphone switch
  • Flip function switches Cue and Mix in headphones (L and R)
  • 10-segment Blue/White/Red LED output metering, which can read Left/Right or Split Cue/Mix
  • Integral rack ears for easy desktop/rack mounting
  • Individual channel gain structure controls (boost - +14db or reduce -10db)
  • Master output attenuator pads (engineer only -10 db and -20db)
Input & Output Levels
  • CD/Line: 20Hz-20kHz (+/-0.5dB)
  • Phono: 20Hz-20kHz (+/-1.5dB/RIAA)
  • Mic [Line]: 20Hz-20kHz (+/-2dB) [20Hz-20kHz (+/-0.5dB)]
  • Aux/FX Return: 20Hz-20kHz (+/-0.5dB)
Insert Send
  • (unbalanced, Ch1 only)
  • CD/Line: 90dB
  • Phono: 75dB
  • Mic [Line]: 70dB [90dB]
  • Aux/FX Return: 90dB
  • (unbalanced, Ch1 only)
  • THD: <0.02%
    Crosstalk: 80dB
Phono/line input
  • (unbalanced)
  • CD/Line: -12dBu/22kOhms
  • Phono: -52dBu/47kOhms
  • Mic [Line]: -52dBu/3kOhms [-12dBu/22kOhms]
  • Aux/FX Return: -12dBu/22kOhms
Rear panel connector connections
  • XLR INPUT & OUTPUT (3 pin female XLR)
  • Pin 1 Ground
  • Pin 2 Signal Hot
  • Pin 3 Signal Cold
Insert send and return
  • (1/4" TSR Jack) MIC 1 & 2 Only
  • Tip Send
  • Ring Return
  • Sleeve Ground
Phono and 1/4" jacks
  • Tip Hot
  • Sleeve Screen
  • 18dB/Octave @ 63Hz
Master/booth output
  • Output Impedance: 75 ohms
  • Recommended Load: 600 ohms or greater
  • Frequency Response: +/- 1dB, 20Hz-20kHz
  • Distortion: < 0.05% THD, 20Hz-20kHz @ +16dbu
    Maximum Output: +20dB into 600 ohms
Headphone output
  • Output Impedance: <40 ohms
    Recommended Load: 150 ohms or greater
  • Frequency Response: +0, -1dB, 20Hz-20kHz into 200 ohms load
  • Distortion: < 0.05% THD, 20Hz-20kHz @ +16dBu
    Maximum Output: 190mW into 150 ohms
Mono output
  • Output Impedance: 75 ohms
  • Recommended Load: 2k ohms or greater
  • Frequency Response: +/- 1dB, 20Hz-20kHz
  • Distortion: < 0.05% THD, 20Hz-20kHz @ +16dBu
    Maximum Output: +20dBu into 2kOhms
Effects loop output
  • Output Impedance: 75 ohms
  • Recommended Load: 5kOhms or greater
  • Frequency Response: +/- 1dB, 20Hz-20kHz
  • Distortion: < 0.05% THD, 20Hz-20kHz @ +16dBu
    Maximum Output: +20dB into 2KOhms
  • All channels routed at unity, mix at unity: < -85dB
    Crosstalk (@1kHz): < -85dB
  • Fader Cut-off (rel. 0 Mark): < -95dB
    FX Sends offness: < -90dB
  • Mic Input: 2kOhms
  • Line Input: 45k?
  • Aux Input (Unbalanced RCA Phono): 30kOhms
  • Master/booth Output: 75 ohms
  • Aux Output: 75 ohms
  • Headphones Output: 40 ohms
Maximum output levels
  • Insert Send Output: +20dBu into 2kOhms
  • Mix Output: +20dBu into 600 ohms
  • Aux Output: +20dBu into 2k
  • Booth Output: +20dBu into 600 ohms
  • Headphones Output: +20dBu into 300 ohms
  • Headphones: 190mW into 150 ohms
Dimensions/ weight
  • Without rack ears 87.6(H) x 338(W) x 400(D) (mm)
  • With rack ears 87.6(H) x 381(W) x 400(D) (mm)
  • Weight 7.5kgs/ 16.5 lbs
Pro Coverage
Manufacturer's Warranty

1 Soundcraft is a trading division of Harman International Industries Ltd. End User means the person who first puts the equipment into regular operation. Dealer means the person other than Soundcraft (if any) from whom the End User purchased the Equipment, provided such a person is authorised for this purpose by Soundcraft or its accredited Distributor. Equipment means the equipment supplied with this manual.

2 If within the period of twelve months from the date of delivery of the Equipment to the End User it shall prove defective by reason only of faulty materials and/or workmanship to such an extent that the effectiveness and/or usability thereof is materially affected the Equipment or the defective component should be returned to the Dealer or to Soundcraft and subject to the following conditions the Dealer or Soundcraft will repair or replace the defective components. Any components replaced will become the property of Soundcraft.

3 Any Equipment or component returned will be at the risk of the End User whilst in transit (both to and from the Dealer or Soundcraft) and postage must be prepaid.

4 This warranty shall only be available if:

a) the Equipment has been properly installed in accordance with instructions contained in Soundcraft's manual; and
b) the End User has notified Soundcraft or the Dealer within 14 days of the defect appearing; and
c) no persons other than authorised representatives of Soundcraft or the Dealer have effected any replacement of parts maintenance adjustments or repairs to the Equipment; and
d) the End User has used the Equipment only for such purposes as Soundcraft recommends, with only such operating supplies as meet Soundcraft's specifications and otherwise in all respects in accordance Soundcraft's recommendations.

5 Defects arising as a result of the following are not covered by this Warranty: faulty or negligent handling, chemical or electro-chemical or electrical influences, accidental damage, Acts of God, neglect, deficiency in electrical power, air-conditioning or humidity control.

6. The benefit of this Warranty may not be assigned by the End User.

7. End Users who are consumers should note their rights under this Warranty are in addition to and do not affect any other rights to which they may be entitled against the seller of the Equipment.

  • Customer Reviews
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.