The bridge between advanced digital features and old world analog quality.

The 2192 combines Universal Audio's long history of creating high-quality, vintage analog gear with its advanced digital technology. With all Class-A analog circuitry providing luscious detail, clarity, warmth, and preserving the character of the original source combined with sample rates up to 192K, realtime transcoding between AES/EBU, S/PDIF, and ADAT, and support for single and dual wire AES modes, this unit is sure to impress.

The soul of the 2192 is the analog circuitry used in the A/D/A converters. The 2192 serves as an extremely high-quality digital to analog and analog to digital converter. As a front end for a native workstation, the 2192 provides two channels of sterling sound quality for tracking, monitoring and mastering.

The 2192 also offers tremendous flexibility in signal routing and monitoring. It allows signals run into the analog inputs, at samples rate ranging from 44.1K to 192K, to be simultaneously output to AES/EBU (single- or dual-wire), S/PDIF, and ADAT (with industry standard S-MUX interleaving for sample rates above 48kHz). The selectable output monitor allows you to monitor any of the digital inputs, or the analog input with no interruption of the transcoding.

With our Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!

Universal Audio 2192 Master Audio Interface Features:

DC-coupled, fully dual-differential, matched-FET, all discrete Class-A, analog signal path
Ultralow noise 44.1kHz — 192kHz A/D/A converters
Low-jitter internal clock source provides 44.1, 48, 88.2, 96, 176.4, and 192kHz sampling rates
No capacitors in the signal path to degrade sound quality or introduce phase distortion
2 channel ADAT S-MUX I/O for 44.1 to 48kHz transmission of 44.1 to 192kHz audio
2 channel transformer coupled AES/EBU I/O (44.1kHz — 192kHz)
Support for single- and dual-wire AES/EBU at 96 and 192kHz rates
2 Channel transformer coupled S/PDIF I/O (44.1kHz — 192kHz)
Realtime transcoding between digital formats
Independent digital and analog output routing
4 parallel 75 ohm BNC Word Clock outputs for jitter-free and reflection-free clock distribution
2 separate 75 ohm BNC Word Clock inputs capable of synchronizing to 1x house clocks while running at higher 2x and 4x sample rates
Front panel Sync-Lock indicator
Sturdy front panel rotary switches provide Clock, Sample Rate, Analog
Output and Digital Output source selection
Full 24-bit digital signal path throughout
No digital processing of the audio signal
Multi-segment LED bargraph metering on all analog inputs and outputs, with timed peak-hold digital overload (input) and digital peak (output)
indicators
Internal universal auto-sensing, filtered, multi-stage regulated power supply supports 100-240VAC and 50-60Hz power for trouble-free operation world-wide
Rugged 1U rackmount steel chassis

Universal Audio 2192 Master Audio Interface Specifications:

Analog
Inputs: 2 XLR female connectors; DC coupled, dual-differential; Common-mode rejection ratio (CMRR): >90dB; Impedance: ~1.5k ohms; Maximum input level: +31dBu
Outputs: 2 XLR male connectors; DC coupled, dual-differential; Impedance: ~95ohms; Maximum output level: +23dBu
Frequency Response (analog input to ADC to DAC to analog output,
referenced to 1kHz, Fs = 192kHz): +- 0.1dB, 10Hz to 40kHz, -1dB at 74kHz
Analog Level Trim
ADC input (Lo-Z source): Max input for 0dBFS: +30dBu; Min input for 0dBFS: +5.5dBu (3dBV)
DAC output (Hi-Z load): Max output at 0dBFS: +23dBu; Min output at 0dBFS: +4dBu (+1.8dBV)
Factory trim: Headroom: +18dB; Reference level: +4dBu = -18dBFS; Max input/output at 0dBFS: +22dBu
Trim accessed via 15-turn, rear-panel mounted potentiometer

Conversion
A/D: Dynamic range (measured using -38dBu = -60dBFS input at 1kHz, 118dB (A-weighted), 115dB (unweighted); Frequency response (relative to 1kHz): +- 0.02dB, 10Hz to 20kHz @ Fs = 44.1kHz; +- 0.04dB, 10Hz to 40kHz @ Fs = 96kHz; Phase response: <0.1 degrees, 10Hz to 1kHz, -1.0 degrees at 20kHz; Residual noise (200Hz-20kHz): < -145dBFS (-123dBu); THD+N (measured at 1kHz): -110dB, with +4dBu input, -114dB, with -10dBu input
D/A: Dynamic range (measured with -60dBFS = -38dBu output at 1kHz, 122dB (A-weighted), 119dB (unweighted); Frequency response (relative to 1kHz): +- 0.03dB, 10Hz to 20kHz @ Fs = 44.1kHz, +- 0.04dB, 10Hz to 20kHz @ Fs = 96kHz; Phase response: <0.5 degrees, 10Hz to 1kHz, -10 degrees at 20kHz; Residual noise (200Hz-20kHz): < -145dBFS (-123dBu); THD+N (measured at 1kHz): -98dB, with +4dBu output, -103dB, with -10dBu output

Clock
Sample Rate (internal): 44.1, 48, 88.2, 96, 176.4, 192 kHz; Sample rate (external): +- 12.5% vari-speed lock at all rates; 4x BNC Clock Outputs: 75 ohm, 5V CMOS drive 2x BNC Clock Inputs: 75 ohm internal termination, AC coupled, 1.2V(p-p) minimum, 5V(p-p) maximum, 50mA maximum over-voltage current (20 ohms/volt); BNC Clock In to Clock Out Delay: 50ns maximum, Negative edge aligned when synchronized at multiple or submultiple rate

Digital
2-Channel S/PDIF; Dual stacked RCA; Unbalanced, transformer driven output; AC coupled input
2-Channel AES/EBU: Transformer isolated, balanced XLR (x4), Single wire and dual-wire modes (for sample rates above 48kHz)
AES/SPDIF input bits: SCMS: Ignored; Preempahsis: Ignored; Professional/consumer: Ignored
AES/SPDIF output bits: SCMS: Not set; Preempahsis: Not Set; Professional/consumer: Set to Professional
2-Channel ADAT Optical: Dual incline optical TX/RX (reinforced)

Physical
Dimensions: (19" W, 1.75" H, 12.5" D) 1 RU standard 19" rack mount chassis; 11-1/2" depth behind front panel; 1" front panel clearance; 17" chassis width
Thermal: 0 degrees C to 50 degrees C
AC Line: ICE pin power (safety ground ties to chassis at entry point); 100-240VAC, 50-60Hz, auto-sensing; 40W