Tascam US-125M USB Mixing Audio Interface  

Item #: 
1395873429123796987
  • Write a Review

TASCAM's US-125M is a USB audio interface with mixer functionality. It combines a mic, instrument and line source with a computer audio signal and it feeds the mix to your computer via USB. The US-125... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Recommended Products
Overview

TASCAM's US-125M is a USB audio interface with mixer functionality. It combines a mic, instrument and line source with a computer audio signal and it feeds the mix to your computer via USB. The US-125M provides up to 16-bit/48KHz audio resolution and is ideal for broadcasting (live streaming) over the internet. It features four inputs with dedicated level controls: a microphone input (balanced XLR/TRS on rear or unbalanced mini jack on front) with switchable limiter and Signal/Overload indicator, a guitar input (standard phone jack), a stereo line input (RCA) and a stereo audio input from computer via USB. This USB-powered device is housed in a solid aluminum case and can also be used as a simple standalone mixer.

Features
  • USB audio interface with mixer functionality
  • Combines a mic, instrument and line source with a computer audio signal and feeds the mix to your computer via USB
  • Ideal for broadcasting (live streaming) over the internet
  • Four inputs with dedicated level controls:
  • Microphone input (balanced XLR/TRS on rear or unbalanced mini jack on front) with switchable limiter and Signal/Overload indicator
  • Guitar input (standard phone jack)
  • Stereo line input (RCA)
  • Stereo audio input from computer via USB
  • Stereo audio output to computer via USB or directly to RCA output jacks
  • Monitor output (RCA) and headphones output (mini-jack) with level control
  • Zero-latency hardware monitoring
  • Can be used as a simple stand-alone mixer
  • Operates using standard Windows (WDM) and Mac OS X (CoreAudio) audio drivers
  • Audio resolution up to 16-bit/48kHz
  • USB 2.0 equipped (also supports USB 1.1)
  • USB-powered, no AC adapter required
  • Solid aluminum case
Specifications
  • Supported sampling frequency: 32/44.1/48kHz
    Supported bit rate: 16-bit
    Analog audio Inputs
    MIC IN (REAR/XLR)
    Connector: XLR-3-31(1:GND, 2:HOT, 3:COLD), BALANCED
    Input impedance: 2.2kOhms
    Nominal input level: -64dBu +/-3dB to -44dBu +/-3dB
    Maximum input level: -28dBu +/-3dB
    MIC IN (REAR/TRS)
    Connector: 6.3mm (1/4") TRS-jack(T:HOT, R:COLD, S:GND), BALANCED
    Input impedance: 2.2kOhms
    Nominal input level: -64dBu +/-3dB to -44dBu +/-3dB
    Maximum input level: -28dBu +/-3dB
    MIC IN (FRONT)
    Connector: 1/8"(3.5mm) Stereo Mini Jack, UNBALANCED, procldes plug-in power
    Input impedance: 2.2kOhms
    Nominal input level: -64dBu +/-3dB to -44dBu +/-3dB
    Maximum input level: -28dBu +/-3dB
    INST IN
    Connector: 6.3mm (1/4") TS-jack(T:HOT, S:GND), UNBALANCED
    Input impedance: 1mOhms
    Maximum input level: +6dBV
    LINE IN
    Connector: RCA pin-jack, UNBALANCED
    Nominal input level (INPUT:MIN): -15dBV
    Maximum input level: +21dBV
    Analog audio Inputs
    LINE OUT: RCA
    Connector: RCA pin-jack, UNBALANCED
    Output impedance: 200ohms
    Maximum output level: +3dBV +/-2dB (+1.41Vrms)
    PHONES
    Connector: 1/8"(3.5mm) Stereo Mini Jack
    Maximum output level: 15mW+15mW (32ohms loaded)
    USB
    Connector: USB B type 4-pin
    Format: USB 2.0 HIGH SPEED/USB 2.0 FULL SPEED (12MHz USB 1.1 equibalent)
    Power: USB bus powered
    Power consumption: 1W
    Dimensions (WxHxD): 150mm — 40.6mm — 122mm
    Weight: 500g
    Operating temperature: 5 to 35?C
    Accessories: USB cable (1.5m), Warranty card, Quick Start Guide, Owner's manual
    Audio performance
    Frequency response: 20Hz to 20kHz, +/-2dB (MIC to LINE, LINE to LINE, INST to LINE, PC to LINE)
    Noise level: XLR-3-31: -75dBV or less (when direct monitoring 1kHz, MIC IN to LINE OUT, MIC in knob set at -20dB below maximum, OUTPUT knob set at -10dB below maximum, JEITA)
    THD: 0.1% or less (when direct monitoring 1kHz, MIC IN to LINE OUT, MIC in knob set at -20dB below maximum, OUTPUT knob set at -10dB below maximum, JEITA)
    A/D Converter
    THD: 0.01%
    Dynamic range: 89dB
    S/N ratio <89dB
    Channel separation: 85dB
    D/A Converter
    THD: 0.005%
    Dynamic range: 93dB
    S/N ratio: 96dB
    Channel separation: 92dB

    Operating system requirements
    Windows
    OS: Windows XP - 32-bit SP2 or more, 64-bit SP2 or more
    Windows Vista: - 32-bit SP2 or more, 64-bit SP2 or more
    Windows 7 - 32-bit, 64-bit
    Windows 8 - 32-bit, 64-bit
    Driver: WDM (standard Windows driver)
    Macintosh
    OS: MacOS X Panther (10.3.9), Mac OS X Tiger (10.4.11), Mac OS X Leopard (10.5.6), Mac OS X Snow Leopard (10.6), OS X Lion (10.7), OS X Mountain Lion (10.8)
    Driver: Core Audio (standard Macintosh driver)
Warranty
MANUFACTURER'S WARRANTY
Tape machines - 90 day warranty; one year parts warranty.
Warranty terms vary. Check with manufacturer for specific product warranty.


  • Customer Reviews
Loading....
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.