If you wanna rock the house, you need the Juice!

Delivering pure premium power and reliability, the 1400-watt J-1400 stereo power amplifier is great at small rock and DJ gigs for driving mains or on-stage monitors.

Pure Premium Power
This series of amps deliver gobs of power and maintain their high-quality sound for volumes ranging from quiet to cranked. With three models delivering 800, 1400 and 2500 watts of premium power amplification you're sure to find a Juice Series amp.

Features you can use
Sure, the Juice Series look great, but who's going to see them in a rack on side of the stage? You will, that's who. That's why TAPCO added some nice extras to make your job easier. The front-panel includes a volume control and bright signal presence and overload LEDs for each channel. A tour around the back will reveal a mode select switch for mono/stereo/bridged mono operation, a 30Hz subsonic filter for eliminating the lowest of the low frequencies, plus a main breaker and clip limiter circuit for amplifier and loudspeaker protection. Balanced 1/4-inch and XLR inputs plus separate binding post and Speakon outputs for fast setup and no hunting for adapters.

Great for every application
Whether you're setting up for band practice in the garage, waking up at 5 P.M. to get to the club for tonight's gig, or at the club waiting for the bass player to arrive for sound check, you can count on Juice amplification to deliver exceptional sound quality without fail.

With our Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!

Tapco Juice J-1400 Power Amplifier Features:

1400W @ 4 Ohms bridged
Easily switchable mono/stereo/bridged mono operating modes
Separate Speakon outputs for Channel A and Channel B
Third Speakon output for mono bridged applications: also provides both output channels on a single NL4 connector
30Hz subsonic filter for low-frequency speaker protection
Handles for easy transport and protection of level controls
Defeatable clip limiter
Front-panel signal and overload indication

Tapco Juice J-1400 Power Amplifier Specifications:

Continuous Sine Wave Average Output Power per channel, both channels driven, 20 Hz to 20 kHz
2 ohms: 800 W
4 ohms: 450 W
8 ohms: 310 W

Bridged Mono Operation, 20 Hz to 20 kHz
4 ohms: 1400 W
8 ohms: 900 W

Power Bandwidth: -5 Hz to 50 kHz (+0, -3 dB)
Frequency Response: -25 Hz to 25 kHz (+0, -1 dB)
Distortion: THD and SMPTE IMD; 20 Hz to 20 kHz < 0.03% @ 8 ohms
Signal-to-Noise Ration: > 100 dB below rated power into 4 ohms
Channel Separation: > 90 dB @ 1 kHz
Damping Factor: > 300 @ 1 kHz and below
Input Impedance: 20 kOhms balanced; 10 kOhms unbalanced
Input Sensitivity: 1.15 V (+3.4 dBu) for rated power into 4 ohms
Gain: 32 dB
Maximum Input Level: 9.75 Vrms (+22 dBu)
Turn On Delay: 2.5 seconds
Subsonic Filter: 9 dB @ 30 Hz
Topology: Class AB
Cooling: Dual variable-speed fans with back to front airflow
Indicators: Channels A and B, SIG (Signal Present), OL (Overload), Power

Current Consumption
Idle: 0.5 A
Musical Program @ 8-1/2: 5.1 A
Musical Program @ 4-1/2: 6.7 A
Musical Program @ 2-1/2: 10.6 A

AC Power Requirements
U.S.: 120 VAC, 60 Hz
Europe: 240 VAC, 50 Hz
Japan: 100 VAC, 50/60 Hz
Korea: 220 VAC, 60 Hz

Dimensions: 3.5"H x 19"W x 15.7"D (89x483x400mm)
Weight: 48.5 lbs. (22 kg)