Skip to main content Skip to footer
Call and save 18% off a single item $49 or more, now thru Dec. 18

Tannoy Reveal 66 Passive Studio Reference Center Channel Monitor

Item #: 
1274741958857120080
  • Write a Review

The Tannoy Reveal 66 monitor offers open and detailed reproduction of mid-high frequencies further enhanced with the inclusion of the Tannoy WideBand high frequency unit to improve and extend the high... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email

Recommended Products
Overview

The Tannoy Reveal 66 monitor offers open and detailed reproduction of mid-high frequencies further enhanced with the inclusion of the Tannoy WideBand high frequency unit to improve and extend the high frequency phase response. This ensures increased tonal accuracy of individual instruments in the reproduction process—a mix critical factor allowing the best EQ and placement decisions to be made.

FEATURES

From the front:
  • 40mm MDF sculpted baffle—stiff, heavy and rigid and minimises diffraction.
  • Recessed drive units flush with the baffle surface—minimises diffraction.
  • New tweeter has wide band design extending the amplitude response beyond 20kHz audibility to 50kHz to correct the phase response from 8kHz to 20kHz within the audible band. This preserves the harmonic structure of sounds and the stability of the stereo image.
  • Smooth tweeter faceplate contours prevent diffraction and cavity effects.
  • 10 point fixing maximises contact between drive unit and baffle.
  • New design bass units have aluminium flux control rings around the voice coils and copper caps on the pole pieces—linearises the voice coil motional impedance to reduce non linear (3rd order) distortion products caused by varying voice coil inductance. (Except R5A).
  • Bass unit development using Klippell analysis equipment to minimise offsets and linearise the suspension components.
From the side:
  • 18mm MDF cabinet construction provides stiffness and minimises colouration.
  • Internal construction braces the sides and rear of the cabinet against the rear of the bass driver to provide a rigid reactive mass for the moving cone assembly. Ensures fast tight bass response and clear midrange.
  • Front baffle and rear panel tongued and grooved into the cabinet as a mechanical interlock for safety if wall mounted.
From the rear:
  • Simple foolproof gold plated terminal panel. No degradation due to bi-wire links in the HF signal path.
  • OmniMount friendly fixing points for wall mounting.
SPECIFICATIONS
PERFORMANCE
  • Frequency Response:60Hz to 51kHz
  • Recommended Amplifier Power: 80 to 150W @ 8 ohm
  • Power Handling Average RMS: 80W
  • Power Handling Programme RMS: 150W
  • Nominal Impedance: 6 ohm
  • Sensitivity: 92dB for 1W at 1m
  • Distortion: <0.6%
    Crossover Frequency: 2.7kHz
  • Dispersion (@-6dB): 90 degrees
DRIVE UNITS
  • LF/MID: 2 x 165mm (6") multi fibre paper pulp cone
  • WideBand™ HF: 25mm (1") titanium dome, neodymium magnet system.
  • Shielded: Yes
CABINET
  • Type: Optimised bass-reflex loaded
  • Construction: MDF cabinet and front baffle, Tongue and groove front and back
  • Finish: Grey cabinet, Maroon painted baffle
  • Cabinet dimensions (H x W x D): 230mm x 527mm x 340mm (9" x 20 3/4" x 13 3/8")
  • Total Cabinet weight: 12.8kg (28.16lbs)
Pro Coverage
MANUFACTURER'S WARRANTY
WARRANTY STATEMENT

No maintenance of Tannoy products is necessary.

All of our products have been produced and tested with care and precision to give first-class service.

All passive components are guaranteed for a period of five years from the date of purchase from an authorised Tannoy dealer subject to the absence or evidence of misuse, overload, or accidental damage.

All active and electronic components are guaranteed for a period of one year from the date of purchase from an authorised Tannoy dealer subject to the absence of, or evidence of, misuse, overload or accidental damage.

If at any time during this warranty period the equipment proves to be defective for any reason other than accident, misuse, neglect, unauthorised modification or fair wear and tear, we will repair any such manufacturing defect or, at our option, replace it without charge for labour, parts or return carriage.

If you suspect a problem with a Tannoy product then, in the first instance, discuss it with your Tannoy dealer. If you require further assistance then we ask that you deal directly with your local Tannoy distributor.


  • Customer Reviews
Loading....
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.