Tannoy Reveal 6 Passive Studio Reference Monitors  

Item #: 
1274741957951119970
  • Write a Review

The 1" titanium WideBand high-frequency unit is seamlessly matched to a 6.5" long throw, low distortion bass unit by a precision low-loss crossover network. Distortion has been reduced by introducing ... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Recommended Products
Overview

The 1" titanium WideBand high-frequency unit is seamlessly matched to a 6.5" long throw, low distortion bass unit by a precision low-loss crossover network. Distortion has been reduced by introducing flux control rings and copper caps into the magnet system to make the voice coil inductance linear as it moves in and out of the magnetic air gap--otherwise a source of nasty third harmonic distortion. WideBand technology extends the high frequency response to 35kHz and beyond--although frequencies higher than 20kHz are inaudible in all but a few human beings--to correct the phase response within the audible band up to 20kHz. Both drive units are mounted on a massive 40mm thick baffle, curved to minimize diffraction and creating the loudspeaker's distinctive styling. The drive units are magnetically shielded to reduce stray magnetic fields and allow the system to be used close to video monitors.

Features
  • From the front:
  • 40mm MDF sculpted baffle--stiff, heavy and rigid and minimizes diffraction
  • Recessed drive units flush with the baffle surface--minimizes diffraction
  • Wide band design tweeter extends the amplitude response to 50kHz to correct the phase response from 8kHz to 20kHz within the audible band
  • Smooth tweeter faceplate contours prevent diffraction and cavity effects
  • 10 point fixing maximizes contact between drive unit and baffle
  • Aluminum flux control rings around the voice coils and copper caps on the pole pieces on the bass units
  • Bass unit development using Klippell analysis equipment to minimize offsets and make linear the suspension components
  • From the side:
  • 18mm MDF cabinet construction provides stiffness and minimizes coloration
  • Internal construction ensures fast tight bass response and clear midrange
  • Front baffle and rear panel tongued and grooved into the cabinet
  • From the rear:
  • Simple foolproof gold-plated terminal panel. No degradation due to bi-wire links in the HF signal path
Specifications
  • Frequency response: 63Hz to 51kHz
  • Recommended amplifier power: 50 to 100W @ 8 ohm
  • Power handling average RMS: 50W
  • Power handling program RMS: 100W
  • Nominal impedance: 6 ohm
  • Sensitivity: 90dB for 1W at 1m
  • Distortion: <0.6%
  • Crossover frequency: 2.9kHz
  • Dispersion: (@-6dB) 90 degrees
  • LF/mid: 165mm (6") multi fibre paper pulp cone
  • WideBand HF: 25mm (1") titanium dome, neodymium magnet system.
  • Shielded: Yes
  • Cabinet:
  • Type: optimized bass-reflex loaded
  • Construction: MDF cabinet and front baffle, tongue and groove front and back
  • Finish: grey cabinet, maroon painted baffle
  • Shipping dimensions: 24-1/2"H x 11-1/4"W x 17-1/2"D (622 x 287 x 440mm)
  • Shipping weight: 36 lbs. (16kg)
Warranty
MANUFACTURER'S WARRANTY
WARRANTY STATEMENT

No maintenance of Tannoy products is necessary.

All of our products have been produced and tested with care and precision to give first-class service.

All passive components are guaranteed for a period of five years from the date of purchase from an authorised Tannoy dealer subject to the absence or evidence of misuse, overload, or accidental damage.

All active and electronic components are guaranteed for a period of one year from the date of purchase from an authorised Tannoy dealer subject to the absence of, or evidence of, misuse, overload or accidental damage.

If at any time during this warranty period the equipment proves to be defective for any reason other than accident, misuse, neglect, unauthorised modification or fair wear and tear, we will repair any such manufacturing defect or, at our option, replace it without charge for labour, parts or return carriage.

If you suspect a problem with a Tannoy product then, in the first instance, discuss it with your Tannoy dealer. If you require further assistance then we ask that you deal directly with your local Tannoy distributor.


  • Customer Reviews
Loading....
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.