Complete control of your monitor mix and sound right at your mic stand!

The VSM-300XT VoiceSoloXT Active Personal Monitor from TC Helicon offers improved sound, better looks, and a lower price than the original model. The VSM300XT monitor lets you hear the stage mix you need without all the feedback! You get intelligible, natural vocal sound thanks to an ICT (Inductively Coupled Technology) point source driver; a rugged, efficient cast aluminum enclosure; and a clean, quiet 150W BASH amplifier with a built-in limiter. Non-electrical methods are used to couple the tweeter with the woofer making the tweeter indestructible.

The VoiceSoloXT Active Voice Monitor mounts on your mic stand with included hardware to save floor space. Attach the hardware to your stand once, and the monitor will pop on and off. It also rocks back to 3 different angles on the floor. Features mic and line inputs and a pass-thru to connect additional VSM-200XTs (sold separately) or VSM-300s in parallel. A front-panel volume control lets you decide how loud you want your monitor mix and does not affect the level going to any other monitor or the mixing console.

The VSM-300XT monitor speakers are portable and versatile because your monitoring needs can vary by venue, the size of your group and the level of your performance or practice. The VSM-300XT can be used in numerous mounting positions including the highly practical method of integrating VoiceSolo into your boom mic-stand, saving stage space. However, conventional options can also be used like the floor wedge position, on a stand without a boom, or stand mounted for side fill or small PA.

Order with the protection of our 30-day lowest price and total satisfaction guarantees!

TC Helicon VSM 300 XT Voice Solo Active Personal Monitor Features:

Quick mic stand set up. Integrates with boom so the same stand is used for the monitor and microphone.
Versatile placement options provided by dual stand mounting holes and dual bevelled edges for floor mounting.
Two-way point source 6.5" ICTTM driver for optimal near- field live monitoring.
High volume capability: 116dB peak SPLat .5m
150W BASH amplifier.
Cast aluminum enclosure for maximum rigidity and minimum cabinet resonance
Front panel mounted controls for easy access.
External IO box interfaces with instruments, aux mixes
Microphone preamp, stereo line and aux inputs.
Phantom power on mic input
Pass thru to house mixer on all inputs
Mic Level, line level and master level controls.
Shape EQ control on Mic input, plus 18dB/octave 75hz Low Cut Filter.
Selectable 75Hz/150 18dB/Octave Low Cut Filter on
Speaker output mix
Selectable Mono/Stereo operation for line input
Output for active subwoofer

TC Helicon VSM 300 XT Voice Solo Active Personal Monitor Specifications:

Audio Inputs:
All inputs and outputs are balanced
(Onboard)
1/4-inch Line input
XLR with 40VDC phantom power and switchable sensitivity
range 0db/+20db
(I/O connector box)
1/4-inch Line input (Left/Mono)
1/4-inch Line input (Right)
1/4-inch Aux input
XLR Mic input with 40VDC phantom power
Sensitivities:
Mic input - (+20 dB switch in) +4 dBu to -23 dBu
(+20 dB switch out) -16 dBu to -43 dBu
Line input - +20 dBu to -13 dBu

Audio Outputs:
1/4-inch Mix output (Slaves to Output level and EQ)
1/4-inch Sub output (Slaves to Output level only)
1/4-inch Line thru (Left/Mono)
1/4-inch Line thru (Right)
1/4-inch Aux thru
XLR Mic thru

Power Amp:
150 watts BASH© technology into 4 ohms (200 watts peak)
Distortion: 0.5% @ 150W; 10% @ 200W
Frequency response: 75 Hz 20 kHz
EQ
Low: ñ 10 dB @ 120 Hz
High: ñ 10 dB @ 15 kHz
"Shape" (mic input only) complex curve

Speaker:
Speaker: 6.5 inch patented ICTcustom-designed point
source driver includes inductively coupled tweeter
Nominal impedance: 4 ohms
120 Watt Program / 240 Watt Peak power handling
Conical dispersion: 90 degrees
Frequency response: 120 Hz 20 kHz
Peak SPL: 116 dB @ .5 meter

Case:
Enclosure: molded aluminum with integral bass port
Color: Black
Dimensions (H x W x D): 9" x 7" x 9.75" (230 cm x 180 cm x 250 cm)