Stanton RM.404 19" 4-Channel Rackmount DJ Mixer  

Item #: 
1274742001356135344
  • Write a Review

The 4-channel, 5-rackspace RM.404 features Stanton's Superior Sound Technology (SST) for pure sound, diffused LEDs and lighted buttons and knobs for easy veiwing, plus plenty of inputs to connect a ra... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Recommended Products
Overview

The 4-channel, 5-rackspace RM.404 features Stanton's Superior Sound Technology (SST) for pure sound, diffused LEDs and lighted buttons and knobs for easy veiwing, plus plenty of inputs to connect a range of gear.

Inputs include 10 line/CD inputs, 4 phono inputs, 2 mic inputs (XLR and 1/4") with seperate 3-band EQ and a talkover function, plus a minijack input to connect your iPod (overrides line input 5). Versatile outputs include master (XLR balanced and RCA), zone (1/4" balanced and RCA), record (RCA) and headphone (1/4" and 1/8").

Innovative Illumiknobs use colored backlights to show knob position in the dark and level indicators with diffused LEDs and backlit Cue buttons help you see what you're doing. The RM.404 also features separate gain and 3-band EQ (+9/-26dB) per channel; fully assignable crossfader with fader start function; cue section with stereo/split function, cue pan, and level control; and a recessed rear panel to keep cables hidden.

SST mixers offer several important advantages for DJs:

Ultralow Noise
Why add noise to your mix when you can have the pure sound of SST? Try this with your current DJ mixer: make sure nothing is playing, then turn all the channel faders and master fader to their maximum positions. Then boost all the EQs to their highest settings. What you'll probably get is a bunch of hiss and noise. On an SST mixer, you won't hear a thing!

Zero Bleed
Another problem common to DJ mixers is channel bleed. For example, let's say you have a CD playing on channel 1 and nothing playing on channel 2. On many mixers, if you were to turn up channel 2's fader all the way you would hear the music bleeding over from channel 1. Again, with an SST mixer all you would hear is silence.

Better Overall Sound
Because Stanton builds SST mixers with high dynamic range and low distortion, their mixers have a much more clean, transparent sound. The result is your music will sound the way it was intended, without being "colored" by the circuitry of the mixer.

Built to Last
SST mixers are designed using only the highest quality components for longer life and more reliable performance. Did you know that many mixers use circuit boards made of a paper-like material? Spill a drink on that and your mixer is toast. SST mixers use glass epoxy boards for better durability. They also feature surface-mount technology, which means if you were to open one up you wouldn't see a mess of wires but a clean design that keeps Stanton mixers quiet.

Features
  • 4-channel club/mobile mixer in 5U rackmount chassis
  • SST technology
  • 10 line/CD inputs
  • 4 phono inputs
  • 2 mic inputs (XLR and 1/4") with separate 3-band EQ, plus a talkover function
  • Minijack input (overrides line input 5) for connecting an iPod
  • Diffused LEDs level indicators and backlit cue buttons for easy viewing
  • Innovative Illumiknobs use colored backlight to show knob position in dark
  • Separate gain and 3-band EQ (+9/-26dB) per channel
  • Fully assignable crossfader with fader start function
  • Cue section features stereo/split function, cue pan and level control
  • Versatile outputs: master (XLR balanced and RCA), zone (1/4" balanced and RCA), record (RCA) and headphone (1/4" and 1/8")
  • Recessed rear panel keeps cables hidden
Specifications
  • Frequency response: 20Hz-20kHz ±1.5dB
    THD+N (line): > 0.005% at 1kHz
    Signal to noise ratio (ref: max level): > 110dB

    Noise Floor
    Line in to unbalanced output: < -92dBV
    Line in to balanced output: < -88dBu

    Crosstalk*
    Line to phono line to line: < -90dB at 1kHz
    Phono to line: < -88dB at 1kHz
    Fader kill (channel and crossfader): < -90dB at 1kHz

    Max Output Level: +18 dBV Unbalanced
    (Unity Gain- Line Input): +24 dBu Balanced Outputs

    EQ
    Mic: 3 band +10 dB (Baxandall Type)
    Channel: 3 band +9 dB/-26 dB (Baxandall Type)
Warranty
MANUFACTURER'S WARRANTY
WARRANTY Through Stanton’s authorized dealers around the World, Stanton, or one of Stanton’s authorized distributors outside the U.S., will, without charge, repair or replace, at the sole discretion of the entity responsible for making the repair or providing the replacement, any Stanton merchandise proved defective in material or workmanship for a period of one (1) year following the date of original purchase. Exceptions to this warranty are as noted below:   The warranty for mechanical parts which are subject to wear and tear are limited to the earlier to occur of thirty (30) days following the date of original purchase or the following number of cycles: Faders - 15,000; Rotary potentiometers - 10,000; and Switches - 10,000.   Stanton will warrant all replacement parts and repairs for ninety (90) days from the date of original shipment. Repairs made necessary by reason of misuse, alteration, normal wear, or accident are not covered under this warranty.  


  • Customer Reviews
Loading....
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.