Stanton M.303 10" 3-Channel Dance Mixer with Balanced Outputs
Write a Review
This Stanton mixer doesn't just look good; it sounds great too--thanks to Stanton's Superior Sound Technology. 3-channel mixer with 3-band EQ on every channel and kill switches is engineered with SST ... Click To Read More About This Product
We're sorry—we no longer carry this item.
Find a similar product below or contact us for a recommendation of a great alternative.
This Stanton mixer doesn't just look good; it sounds great too--thanks to Stanton's Superior Sound Technology. 3-channel mixer with 3-band EQ on every channel and kill switches is engineered with SST for ultralow noise and zero bleed. Features 3 phono inputs, 6 line inputs, plus mic input with EQ; gain knob with LED indicators on all 3 channels; cue section with PFL and cue pan; and balanced master and booth outputs.
SST mixers offer several important advantages for DJs:
Ultralow Noise Why add noise to your mix when you can have the pure sound of SST? Try this with your current DJ mixer: make sure nothing is playing, then turn all the channel faders and master fader to their maximum positions. Then boost all the EQs to their highest settings. What you'll probably get is a bunch of hiss and noise. On an SST mixer, you won't hear a thing!
Zero Bleed Another problem common to DJ mixers is channel bleed. For example, let's say you have a CD playing on channel 1 and nothing playing on channel 2. On many mixers, if you were to turn up channel 2's fader all the way you would hear the music bleeding over from channel 1. Again, with an SST mixer all you would hear is silence.
Better Overall Sound Because Stanton builds SST mixers with high dynamic range and low distortion, their mixers have a much more clean, transparent sound. The result is your music will sound the way it was intended, without being "colored" by the circuitry of the mixer.
Built to Last SST mixers are designed using only the highest quality components for longer life and more reliable performance. Did you know that many mixers use circuit boards made of a paper-like material? Spill a drink on that and your mixer is toast. SST mixers use glass epoxy boards for better durability. They also feature surface-mount technology, which means if you were to open one up you wouldn't see a mess of wires but a clean design that keeps Stanton mixers quiet.
3-channel dance mixer in sleek 10" chassis
Engineered with SST for ultralow noise and zero bleed
3 phono inputs, 6 line inputs, plus mic input with EQ
Gain and 3-band EQ controls on all channels
Kill switches for channels 1 and 3
Cue section with PFL and cue pan
Balanced master and booth outputs
Frequency response: 20Hz to 20kHz ±1.3dB THD+N (Line): < 0.015% at 1kHz Signal to noise ratio (ref to max. level) dynamic range: 110dB (main signal path) Noise floor (line in to any output): < -92dBV
Crosstalk Line to phono line to line: < -90dB at 1kHz Phono to line: < -90dB at 1kHz Fader Kill (channel and crossfader): < -90dB at 1kHz
Max output level: (Unity gain- line input) +18 dBV unbalanced +24 dBu balanced outputs
Inputs/Outputs Line inputs: x12 (RCA) x6 line inputs, -10dBV/10kOhm Phono inputs: x6 (RCA), x3 phono inputs -50dBV/-10dBV 47kOhm/>10kOhm Mic input: 1(1/4")/1 XLR -50dBV/4.7kOhm (combo jack) Master outputs: x2 (1/4") balanced/1 x 2 (RCA) unbalanced, +4dBu balanced/-10dBV unbalanced Booth outputs: x2 (1/4") balanced/1 x 2 (RCA) unbalanced -2dBu balanced/-10dBV unbalanced Record output: 1 x 2 (RCA) unbalanced/-10dBV Headphone output: x1 (1/4 inch), x1 (1/8 inch) greater than 32-ohm load Send output: x2 1/4" unbalanced/-10dBV Return input: x2 1/4" unbalanced/-10dBV /10kOhm Dimensions (LxWxD): 13-4/5" x 10-2/5" x 5-9/10" (35 x 26.5 x 15cm) 5 rackspaces Weight: 12.1 lbs. (5.5 kg)
WARRANTY Through Stantonâs authorized dealers around the World, Stanton, or one of Stantonâs authorized distributors outside the U.S., will, without charge, repair or replace, at the sole discretion of the entity responsible for making the repair or providing the replacement, any Stanton merchandise proved defective in material or workmanship for a period of one (1) year following the date of original purchase. Exceptions to this warranty are as noted below: Â The warranty for mechanical parts which are subject to wear and tear are limited to the earlier to occur of thirty (30) days following the date of original purchase or the following number of cycles: Faders - 15,000; Rotary potentiometers - 10,000; and Switches - 10,000. Â Stanton will warrant all replacement parts and repairs for ninety (90) days from the date of original shipment. Repairs made necessary by reason of misuse, alteration, normal wear, or accident are not covered under this warranty. Â
You are changing the Ship-To country.
Our product catalog varies by country due to manufacturer
restrictions. If you change the Ship-To country, some or
all of the items in your cart may not ship to the