The M.304 Mixer lets you get creative with spring-loaded kill switches and an FX loop!

The Stanton M.304 is a 3-channel mixer with Penny & Giles crossfader and FX loop. This mixer is engineered for ultralow noise and zero cross-channel bleed. 3 phono inputs, 6 line inputs, plus mic input with EQ; gain knob with LED indicators on all 3 channels; 3-band EQ on all channels, plus kill switches on channels 1 and 3; cue section with PFL and cue pan; and balanced master and booth outputs.

Stanton M.304 10" 3-Channel Mixer with Penny and Giles Crossfader Features:

3-channel mixer with Penny & Giles crossfader and FX loop
Engineered with SST for ultralow noise and zero bleed
3 phono inputs, 6 line inputs, plus mic input with EQ
Gain knob with LED indicators on all 3 channels
3-band EQ on all channels, plus kill switches on channels 1 and 3
Cue section with PFL and Cue Pan
Balanced master and booth outputs

Stanton M.304 10" 3-Channel Mixer with Penny and Giles Crossfader Specifications:

Frequency response: 20Hz to 20kHz ±1.3dB
THD+N (Line): < 0.015% at 1kHz
Signal to noise ratio (ref to max. level) dynamic range: 110dB (main signal path)
Noise floor (line in to any output): < -92dBV
Crosstalk
Line to phono line to line: < -90dB at 1kHz
Phono to line: < -90dB at 1kHz
Fader Kill (channel and crossfader): < -90dB at 1kHz
Max output level:
(Unity gain- line input)
+18 dBV unbalanced
+24 dBu balanced outputs
EQ:
Mic: 3 band +10dB (Baxandall Type)
Channel:
Hi +9, -45dB, Kill: -45dB
Mid +9, -35dB, Kill: -35dB
Low +9, -55dB, Kill: -55dB
Inputs/Outputs
Line inputs: x12 (RCA) x6 line inputs, -10dBV/10kOhm
Phono inputs: x6 (RCA), x3 phono inputs -50dBV/-10dBV
47kOhm/>10kOhm
Mic input: 1(1/4")/1 XLR -50dBV/4.7kOhm (combo jack)
Master outputs: x2 (1/4") balanced/1 x 2 (RCA) unbalanced,
+4dBu balanced/-10dBV unbalanced
Booth outputs: x2 (1/4") balanced/1 x 2 (RCA) unbalanced
-2dBu balanced/-10dBV unbalanced
Record output: 1 x 2 (RCA) unbalanced/-10dBV
Headphone output: x1 (1/4 inch), x1 (1/8 inch) greater than 32-ohm load
Send output: x2 1/4" unbalanced/-10dBV
Return input: x2 1/4" unbalanced/-10dBV /10kOhm
Dimensions (LxWxD): 13-4/5" x 10-2/5" x 5-9/10" (35 x 26.5 x 15cm) 5 rackspaces
Weight: 12.1 lbs. (5.5 kg)