Skip to main content Skip to footer
Call and save 18% off a single item of $49 or more. Call 866-498-7882 for qualifying brands

Shure UR24D/BETA58 Dual Handheld Wireless Microphone System

Item #: 
127474164728314864
  • Write a Review

The Shure UR24D/BETA58 Dual Handheld Wireless Microphone System features the UR4D Dual Channel Diversity Receiver and two UR2/BETA58 Handheld Transmitters which consists of the UR2 Wireless Handheld T... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email

Recommended Products
Overview

The Shure UR24D/BETA58 Dual Handheld Wireless Microphone System features the UR4D Dual Channel Diversity Receiver and two UR2/BETA58 Handheld Transmitters which consists of the UR2 Wireless Handheld Transmitter fitted with Beta 58A Supercardioid Microphone capsule. The UHF-R is a professional, wireless technology engineered for the most demanding touring environments and installations. UHF-R wireless microphone systems offer unprecedented flexibility and versatility. Using multiple frequency bands, over 108 compatible systems can be used simultaneously. Individual frequency bands deliver up to 60 compatible systems per band. The UHF-R also includes infrared synchronization that allows you to configure transmitter settings from the receiver.

Frequency Band Selection

Shure offers wireless systems in a selection of bands that conform to the different government regulations of specific nations or geographic regions. These regulations help limit radio frequency (RF) interference among different wireless devices and prevent interference with local public communications channels, such as television and emergency broadcasts. The system's band and frequency range are identified on the face of the receiver and transmitter.

Groups and Channels

To transmit audio through a wireless system, the transmitter and receiver must be set to the same radio frequency, or channel. A wide selection of channels allows more microphones to be used at the same time, since each microphone must operate on a different channel. It also provides a greater choice of open channels--those that are free from interference from television broadcasts, electronic devices, or other wireless systems. A group is a selection of compatible channels. Wireless Shure microphones work better together when set to channels in the same group.

Automatic Frequency Selection

The following features scan the RF environment to find the best group and channel settings for a particular installation.
¢Group Scan--finds the group with the most open channels, then sets all networked receivers to channels in that group

¢Channel Scan--finds the first open channel in the currently selected group and sets the receiver to that channel


Automatic Transmitter Sync

This feature automatically transfers the group and channel settings from a receiver to a transmitter. You can also program other transmitter settings on a receiver and transfer those settings too.

Interface Lock

This feature locks the receiver and transmitters so that users cannot change settings. The transmitter power switch can also be disabled so that the transmitter remains on if the power switch is accidentally toggled during a performance.

Audio Gain Structure

The following settings allow you to adjust audio gain throughout the system:
¢ Sensitivity (bodypack only). A 25 dB range of gain adjustment at the bodypack transmitter input

¢Transmitter Gain. A 30dB range of audio gain adjustment within the transmitter (affects audio level at the receiver, as indicated by
the Audio LEDS.)

¢Output Level. 32 dB of attenuation at the receiver output, plus a mute setting

¢-30 dB pad for matching audio levels at the receiver XLR output


Networking

Each receiver has an RJ-45 port on the back for connecting to other receivers over an Ethernet network. Networking receivers allows you to automatically set channels for all the receivers with a single group scan command. You can also control and monitor all networked receivers through the Shure Wireless Workbench PC software.

Shure Wireless Workbench Software

The Shure Wireless Workbench software on the supplied CD includes a variety of useful tools for installing and managing multiple wireless systems. Simply install the software on your computer and connect it to a network of receivers to monitor and control receivers and transmitters throughout the network.

UR4D Dual Channel Diversity Receiver

The UR4D Dual Channel Diversity Receiver has the latest in wireless technologies including Shure's patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology. The UR4D dual channel receiver provides advanced control and robust flexibility for a wide range of professional uses.

UR2 Handheld Transmitter
UHF-R handheld transmitters boast a rugged, lightweight construction and an antenna design which advances RF transmission reliability. The transmitter design allows for interchangeable microphone cartridges.

Beta 58A Vocal Microphone

The Shure Beta 58A is a high-output supercardioid dynamic vocal microphone designed for professional sound reinforcement and project studio recording. It has become a leading choice among vocalists and touring professionals worldwide.

The Beta 58A maintains a true supercardioid pattern throughout its frequency range. This insures high gain before feedback, maximum isolation from other sound sources, and minimum off-axis tone coloration. The Beta 58A has a shaped frequency response that is ideal for close-up vocals. The superb performance of this microphone is not affected by rough handling because of its rugged construction, proven shock mount system, and hardened steel mesh grille.

Consumer Alert:

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.

FEATURES

UR4D Dual Channel Diversity Receiver 
2400 Selectable Frequencies Across 60 MHz Bandwidth
Track Tuning Filtering Technology
Up to 60 Preset Compatible Systems/Band (140 w/Multiple Bands, Region Dependent)
Networked Automatic Frequency Selection
Automatic Transmitter Setup (including Custom Group Upload)
Flash Memory to Store Six 60-channel Custom Frequency Groups
Shure's Patented Audio Reference Companding
Multi-function Bit-mapped Backlit LCD
Built-in USB and Ethernet Network Compatibility
Shure's Wireless Workbench Control/Monitoring Software
Remoteable Antennas
Shure's Microprocessor-controlled Diversity

UR2 Handheld Transmitter
Switchable RF power
Frequency and power lockout
Bit-mapped backlit LCD
2 AA batteries -- up to 8 hours continuous use
Intrared automatic transmitter sync
All metal die-cast construction

Beta 58A Vocal Microphone
Frequency response tailored for vocals, with brightened midrange and bass rolloff to control proximity effect
Uniform supercardioid pattern for high gain before feedback and superior rejection of off-axis sound
Neodymium magnet for high signal-to-noise output
Hardened steel mesh grille that resists wear and abuse
Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
Minimally effected by varying load impedance
Legendary Shure quality and reliability
SPECIFICATIONS
 UHF-R Wireless System 
RF Carrier Frequency Range: 518-865 MHz, depending on region
Working Range : UR1, UR2: 150 m (500 ft.), under typical conditions
500 m (1600 ft) line-of-sight, outdoors for a single system
NOTE: Actual working range depends on RF signal absorption, reflection and
interference
Audio Frequency Response : 40 “ 18,000 Hz, (+1 dB, -3 dB). NOTE: Overall system frequency response depends on the microphone element
Gain Adjustment Range: UR1: -20 to +35 dB; UR2: -10 to +20 dB
Modulation: FM (45 kHz max. deviation), compander system with pre- and
de-emphasis
Dynamic Range: >105 dB, A-weighted
Image Rejection: >110 dB typical
RF Sensitivity : -110 dBm Typical 12 dB SINAD; 105 dBm Typical 30 dB SINAD
Ultimate Quieting (ref. 45 kHz deviation): >100 dB, A-weighted
Signal Polarity: Positive pressure on microphone diaphragm (or positive voltage
applied to tip of WA302 phone plug) produces positive voltage
on XLR output pin 2 with respect to XLRpin 3 and on the tip of
the 1/4-inch output jack.
System Distortion (ref. ± 45 kHz deviation, 1 kHz modulation): <0.3% Total Harmonic Distortion typical
Power Requirements: UR1, UR2: Two 1.5V AA batteries; UR4:100 to 240Vac, 50/60 Hz
Current Drain: UR1, UR2: 180 mA max. (normal RF power setting) 240 mA max. (high RF power setting); UR4D, UR4S: 0.8 Amps max.
Battery Life (Typical): UR1, UR2: 9.5 hours (low power); 6 hours (high power)
Operating Temperature Range: -18 degrees to +57 degrees C (0 degrees to +135 F)
NOTE: Battery characteristics may limit this range
NOTE: Electrical safety approval is based on a maximum ambient temperature of 35 degrees C (95 degrees F).
Housing: UR1: Cast magnesium; UR2: Aluminum die-cast handle and aluminum machined battery cup; UR4S, UR4D: Galvanized steel

UR4D Overall Dimensions (H x W x D): 1.72 x 19.00 x 14.39 in. (44 x 483 x 366 mm)
UR4D Net Weight: 1 lbs (5.0 kg)

UR2/BETA58 Overall Dimensions (Length x Diameter): 10.15 x 2 in. (258 x 51 mm)
UR2/BETA58 Net Weight: 11.1 oz. (314 g) without battery

Beta 58A Vocal Microphone
Type: Dynamic (moving coil)
Frequency Response: 50 to 16,000 Hz (NOTE: The curve above shows on-axis response at a distance of 2 feet from a uniform sound source. Your response may vary, depending on microphone position.)
Polar Pattern: Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency
Output Level (at 1,000 Hz): Open Circuit Voltage: -51.5 dBV/Pa* (2.6 mV)
*1 Pa = 94 dB SPL
Impedance: Rated impedance is 150 ohms (290 ohms actual) for connection to microphone inputs rated low Z Phasing.
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3.
Pro Coverage
MANUFACTURER'S WARRANTY
One year warranty on wireless mics, mixers, and circuitry products.
2 year warranty on wired mics.
Warranty terms vary. Check with manufacturer for specific product warranty.


  • Customer Reviews
Loading....

Review Snapshot

by PowerReviews
 
5.0

(based on 1 review)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 1 customer

Displaying review 1

Back to Top

 
5.0

Amazing

By CALEB DARDEN

from Brea, Ca

I use three of these units at my church every Saturday and Sunday and these are amazing to work with. You are able to completely customize each channel with frequency and you can put the names on the individual mics so you dont get them mixed up. You can also monitor battery levels from the receivers so you always know how they are doing. These mics have a super clean signal and have a good distance too. Clean and clear sound everytime and they are so great to work with. These are definitely worth the money and they sound and look amazing!

Displaying review 1

Back to Top

You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.