The Shure ULXP4 professional wireless receiver offers an exceptional value in both performance and price, for both working musicians and sound installers. The expanded feature set of the ULXP4 receive... Read More
We're sorry—we no longer carry this item.
Find a similar product below or contact us for a recommendation of a great alternative.
The Shure ULXP4 professional wireless receiver offers an exceptional value in both performance and price, for both working musicians and sound installers. The expanded feature set of the ULXP4 receiver - with advanced settings and controls including lockable settings and group scan - offers a direct path to full, clear audio signals.
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.
Automatic Frequency Selection with group scan function
Over 1400 selectable frequencies
5-segment transmitted audio signal strength meter
5-segment RF meter
3-segment transmitter battery fuel gauge
Advanced multi-function LCD displays group and channel
Remotable 1/2-wave antenna
Frequency and volume lockout
XLR and 1/4-inch output
Rugged metal chassis
1/2 rack design
RF Carrier Frequency Range: 554.000 to 865.000 MHz Effective Range: 100 m (300 ft.) under optimal conditions (Actual working range depends on RF signal absorption, reflection, and interference) Audio Frequency Response: 25 to 15,000 Hz, (±2 dB (Overall system frequency response depends on the microphone element) *Output Level: Microphone Level = Line Level ” 20 dB Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output Receiver Audio Output Level (±38 kHz deviation, 1 kHz tone) XLR connector (into 600 ohm load): +3.9 dBV (line), ”17 dBV (mic); 1/4 inch connector (into 3000 ohm load): ”2 dBV Impedance (output): 50 ohms at line level; 2000 ohms at mic level Modulation: ±38 kHz deviation compressor-expander system with pre- and de-emphasis. Dynamic Range: >100 dB, A-weighted RF Sensitivity: 1.26V for 12 dB SINAD (typical) Image Rejection: 80 dB typical Spurious Rejection: 75 dB typical Ultimate Quieting (reference ±38 kHz deviation) >105 dB, A-weighted System Distortion (reference ±38 kHz deviation, 1 kHz modulation): 0.3% total harmonic distortion, typical Power Requirements: - 18 Vdc (negative ground), 550 mA Battery Life: 8 to 9 hours (with 9V Duracell MN1604 alkaline battery) Operating Temperature Range: -20 degrees to 49 degrees C (”4 degrees to 120 degrees F) NOTE: Battery characteristics may limit this range. Overall Dimensions: 1.72 in. x 8.56 in. x 6.52 in. (43 x 214 x 163 mm) Net Weight: 2 lbs, 7 oz. (1105 g)
One year warranty on wireless mics, mixers, and circuitry products. 2 year warranty on wired mics. Warranty terms vary. Check with manufacturer for specific product warranty.
Picked up this unit to use with my guitar and could not be happier with the way it performs. Also picked up the an optional lavalier microphone to use while with my video camera. I�ۡ���ve found the system to versatile, well built and it sounds great.
You are changing the Ship-To country.
Our product catalog varies by country due to manufacturer
restrictions. If you change the Ship-To country, some or
all of the items in your cart may not ship to the