Shure ULXP24D/58 Dual Handheld Wireless Microphone System M1

Item #: 
1274034494149
  • Write a Review

The Shure ULXP24D/58 Wireless Microphone System includes two ULXP4 Diversity Receivers, and two ULX2 Handheld Transmitter fitted SM58 Handheld Microphone capsules. Shure ULX Standard UHF systems repre... Read More

Overview

The Shure ULXP24D/58 Wireless Microphone System includes two ULXP4 Diversity Receivers, and two ULX2 Handheld Transmitter fitted SM58 Handheld Microphone capsules. Shure ULX Standard UHF systems represent a breakthrough in performance and price for both working musicians and professional sound installers. ULX Professional systems offer more advanced features and controls, including lockable settings and group scan function. Over 1400 selectable, pre-programmed frequencies are available, and Automatic Frequency Selection provides a straight shot to a clear channel.

ULXP4 Wireless Diversity Receiver

The expanded feature set of the ULXP4 wireless receiver, with advanced settings and controls including lockable settings and group scan, offers a direct path to full, clear audio signals. The ULXP4 offers an exceptional value in both performance and price, for both working musicians and sound installers.

ULX2 Handheld Transmitter

The ULX2 Handheld Transmitter features 3-segment battery fuel gauge, frequency and power settings, and control lockout. A backlit LCD shows group and channel.

SM58 Vocal Microphone

The Shure SM58 unidirectional (cardioid) dynamic vocal microphone is designed for professional vocal use in live performance, sound reinforcement, and studio recording. It has a tailored vocal response tuned to accentuate the warmth and clarity of lead and back-up vocals. A highly effective, built-in spherical_filter minimizes wind and breath "pop" noise. A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. Rugged construction, a proven shock-mount system, and a steel mesh grille ensure that even with rough handling, the Shure SM58 will perform consistently, outdoors or indoors. Consistently the first choice of performers everywhere.

Consumer Alert:

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.

Features
  • ULXP4 Wireless Diversity Receiver
  • Automatic Frequency Selection with group scan function
  • Over 1400 selectable frequencies
  • Predictive Diversity
  • 5-segment transmitted audio signal strength meter
  • 5-segment RF meter
  • 3-segment transmitter battery fuel gauge
  • Advanced multi-function LCD displays group and channel
  • Mic/Line switch
  • Remotable 1/2-wave antenna
  • Frequency and volume lockout
  • XLR and 1/4-inch output
  • Rugged metal chassis
  • 1/2 rack design
  • ULX2 Handheld Transmitter
  • 8-9 Hour Battery Life
  • Power: On/Off Switch, Battery
  • LED-Green When ON, Red When Battery Low
  • Three-segment Battery Power Icon
  • PEAK Icon-Appears When Audio Signal Overloads
  • Group/Channel Displays
  • SET Button for Saving Settings
  • Adjustable Audio Gain Control
  • Input Attenuation Switch-Select 0dB for Voice/Low Output; 20dB for High Output
  • 4-pin Mini Connector
  • Battery Cover Unscrews to Expose Battery and Gain Control
  • 9V Battery Included
  • SM58 Vocal Microphone
  • Frequency response tailored for vocals, with brightened midrange and bass rolloff
  • Uniform cardioid pickup pattern isolates the main sound source and minimizes background noise
  • Pneumatic shock-mount system cuts down handling noise
  • Effective, built-in spherical wind and pop filter
  • Supplied with break-resistant stand adapter which rotates 180 degrees
  • Legendary Shure quality, ruggedness and reliability
  • Cardioid (unidirectional) dynamic
  • Frequency response: 50 to 15,000 Hz
Specifications
  • RF Carrier Frequency Range: 554.000 to 865.000 MHz (Available frequencies depend on the applicable regulations in the country where the system is
    used). Refer to the frequency supplement supplied with the system.
    Effective Range: 100 m (300 ft.) under optimal conditions (NOTE: Actual working range depends on RF signal absorption, reflection, and interference)
    Audio Frequency Response: 25 to 15,000 Hz, ± 2dB (NOTE: Overall system frequency response depends on the microphone element.)

    ULXP4 Receiver Input
    Connector: Antenna Power Input
    Connector Type: BNC IEC 320
    Actual Impedance: 50 Ohms
    Nominal Input Level: ”95 to ”30 dBm 15 VDC
    Maximum Input Level: +6 dBm (”20 dBm recommended) 18 Vdc
    Pin Assignments: Shell = Ground Center = Signal IEC Standard
    Voltage for Remote Power: 12 Vdc, 150 mA maximum

    ULXP4 Receiver Output
    Connector: High Z Audio; Low Z Audio
    Output Configuration: High Z Audio Unbalanced (1/4 in.); Low Z Audio Balanced (XLR)
    Actual Impedance: High Z Audio 3 k0hms; Low Z Audio 22
    Nominal Input Level: High Z Audio Pin Assignments: Tip = Hot Ring/ Sleeve = Gnd: Low Z Audio 1 = Ground 2 = Hot 3 = Cold
    Voltage/Current/Phantom: Power Protection?: High Z Audio; Yes Low Z Audio Yes

    ULX2 Transmitter Input
    Input Configuration: Unbalanced, active
    Actual Impedance: 20 kohms
    Maximum Input Level: 10 Vp”p (12 dBV) for 1% THD at minimum gain setting using 1 kHz signal.

    ULX2 Transmitter Output
    Actual Impedance: 50 Ohms
    Nominal Output Level: 20 mW
    Maximum Output Level: 30 mW
    Pin Assignments: Shell = Ground Center = Signal

    Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive
    voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output
    Transmitter Gain Adjustment Range: ULX1: 25 dB
    Receiver Audio Output Level (± 38 kHz deviation, 1 kHz tone):
    XLR connector (into 600 ohm load): +3.9 dBV (line), ”17 dBV (mic)
    1/4 inch connector (into 3000 ohm load): ”2 dBV
    Impedance
    ULX2 (input): 1 Megohm ULXP4 (output): 50 ohms at line level; 2000 ohms at mic level
    Modulation: ±38 kHz deviation compressor-expander system with pre- and de-emphasis.
    RF Power Output: ULX2: 30 mW maximum
    Dynamic Range: >100 dB, A-weighted
    RF Sensitivity: 1.26 uV for 12 dB SINAD (typical)
    Image Rejection: 80 dB typical
    Spurious Rejection: 75 dB typical
    Ultimate Quieting (reference ± 38 kHz deviation): >105 dB, A-weighted
    System Distortion (reference ± 38 kHz deviation, 1 kHz modulation): 0.3% total harmonic distortion, typical
    Power Requirements: ULX2: 9V alkaline battery; 8.4 V Nicad optional; ULXS4: 14 - 18 Vdc (negative ground), 550 mA
    Battery Life: 8 to 9 hours (with 9V alkaline battery)
    Operating Temperature Range: - 20 degrees to 49 degrees C (- 4 degrees to 120 degrees F)
    NOTE: Battery characteristics may limit this range
    NOTE: Bodypack and Handheld Transmitters cannot be used simultaneously

    ULXP4 Dimensions (H x W x D): 1.72 in. x 8.56 in. x 6.88 in. (43 mm x 214 mm x 172 mm)
    ULXP4 Weight: 2 lbs 7 oz. (1105 g)

    ULX2/SM58 Dimensions (Length x diameter): 9 x 2 in. (228.6 x 51 mm)
    ULX2/SM58 Weight 10.2 oz. (289 g) without battery

    SM58 Vocal Microphone
    Type: Dynamic (moving coil)
    Frequency Response: 50 to 15,000 Hz
    Polar Pattern: Unidirectional (cardioid), rotationally symmetrical about microphone axis, uniform with frequency
    Sensitivity (at 1,000 Hz Open Circuit Voltage): -54.5 dBV/Pa (1.85 mV)
    1 Pa = 94 dB SPL
    Impedance: Rated impedance is 150 ohms (300 ohms actual) for connection to microphone inputs rated low impedance
    Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
    Connector: Three-pin professional audio connector (male XLR type)
Warranty
MANUFACTURER'S WARRANTY
One year warranty on wireless mics, mixers, and circuitry products.
2 year warranty on wired mics.
Warranty terms vary. Check with manufacturer for specific product warranty.


  • Customer Reviews
Loading....
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.