This specially priced Shure mic pack pairs a Shure SM27SC microphone with a Musician's Gear MS-220 tripod microphone stand and 20' Gear One XLR mic cable.Shure SM27-SC condenser microphoneThe Shure SM... Click To Read More About This Product
This specially priced Shure mic pack pairs a Shure SM27SC microphone with a Musician's Gear MS-220 tripod microphone stand and 20' Gear One XLR mic cable.
Shure SM27-SC condenser microphone
The Shure SM27 is a rugged, versatile, large-diaphragm, side-address cardioid microphone. It has low self-noise and extended frequency response that picks up vocal and instrument nuances with clarity. The SM27 recording mic's durable Shure construction features 3 separate mesh layers that reduce wind and breath noise. It includes a rubber suspension shock mount ideal for isolating stand vibrations in recording applications, and a velveteen storage pouch that protects the vocal mic when not in use.
Musician's Gear MS-220 Tripod Mic Stand with Fixed Boom
The MS-220 Tripod Microphone Stand has a thread adapter and tubular legs. Its adjustable height from floor to top thread is 35" to 61-7/8". The 30-1/4" fixed boom is not adjustable.
Dedicated to manufacturing premium stands for the professional studio musician, DR Pro is your assurance of superior performance and value. Built to surpass industry standards, DR's support gear is strong, lightweight, and uses a durable powder-coated finish paint, tougher tubing, and precision mechanical parts. Plus, DR's industry standard designs make it easy to integrate DR stands into any studio or stage setting.
Gear One's XLR Mic Cable
For serious-minded musicians, Gear One's XLR cables have the strength and durability to withstand more than everyday use. Since your cable is your sound, this XLR mic cable's superior wiring allows your signal to be quiet, eliminating frustrating hums, buzzing, and crackles.
Shure SM27-SC Condenser Microphone
Uniform cardioid pattern for superior off axis rejection
Superior transient response from a low-mass large Mylar® diaphragm
Flat, neutral frequency response for natural reproduction on stage or in the studio
3-position switchable low-frequency filter helps reduce unwanted background noise or counteract proximity effect for consistent, extended low-end
Durable metal construction.
3 separate mesh layers reduces wind and breath noise.
15dB pad for performance consistency across a wider range of high SPL sources
Includes a rubber suspension shock mount ideal for isolating stand vibrations in recording applications, and a velveteen storage pouch that protects the microphone when not in use
Musician's Gear MS-220 Tripod Microphone with Fixed Boom
Adujustableheight from floor to top thread is 35" to 61-7/8". The 30-1/4" fixed boom is not adjustable.
Gear One XLR Microphone Cable
Cartridge type: Externally Biased Condenser
Frequency response: 20 to 20,000Hz
Directional polar pattern: Cardioid
Output impedance: EIA Rated at 150Î (140Î actual)
Attenuation switch: 0 or 15dB attenuation
Low Frequency response switch:
Flat, -6dB/octave below 115Hz, -18dB/octave below 80Hz
Phantom Power: 48 VDC ±4 VDC (IEC 268 15/DIN 45 596), positive pins 2 and 3
Current drain: 5.4 mA typical at 48 VDC
Common mode rejection: >50dB, 20Hz to 20kHz
Polarity: Positive pressure on diaphragm produces positive voltage on output pin 2 relative to pin 3
Dimensions and Weight:
53.0mm (2.08") maximum body diameter, 156.2mm (6.15") long; 642g (22.6oz..)
Sensitivity: (typical, at 1000Hz; 1Pa = 94dB SPL): -37dBV/Pa
Self noise (typical, equivalent SPL; A weighted, IEC 651): 9.5dB
Maximum SPL (1000Hz at 1% THD): 2500Î load (Attenuator on): 138 (153)dB, 1000Î load (Attenuator off): 133 (148)dB
Output Clipping Level (20Hz to 20kHz; THD < 1%. THD of the microphone preamplifier when applied input signal is equivalent to the cartridge output at specified SPL): 2500Î load (7dBV), 1000Î load (1dBV)
Dynamic Range: 2500Î load (128dB), 1000Î load (123dB)
Signal-to-Noise ratio (S/N ratio is difference between 94dB SPL and equivalent SPL of self-noise A-weighted): 84.5dB
GUITAR CENTER'S PRO COVERAGE
Pro Coverage gives you added warranty protection for your gear. Stepping in where the manufacturer's "normal wear and tear" coverage ends, our Pro Coverage program offers you upgraded coverage if your product ever fails Click To Read More About This Product.
Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.