Skip to main content

Shure SM27 Condenser Microphone  

Item #: 
1274741927092109112
  • Write a Review

The SM27 is a rugged and versatile large-diaphragm, side-address cardioid microphone, with low self-noise and extended frequency response that picks up vocal and instrument nuances with clarity. Durab... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Recommended Products
Overview

The SM27 is a rugged and versatile large-diaphragm, side-address cardioid microphone, with low self-noise and extended frequency response that picks up vocal and instrument nuances with clarity. Durable Shure construction features three separate mesh layers that reduce wind and breath noise.

Features
  • Uniform cardioid pattern for superior off axis rejection
  • Superior transient response from a low-mass large Mylar diaphragm
  • Flat, neutral frequency response for natural reproduction onstage or in the studio
  • 3-position switchable low-frequency filter helps reduce unwanted background noise or counteract proximity effect for consistent, extended low-end
  • Durable metal construction
  • 3 separate mesh layers reduce wind and breath noise.
Specifications
  • Cartridge Type: Externally biased condenser
    Frequency response: 20 to 20,000Hz
    Directional Polar Pattern: Cardioid
    Output impedance: EIA Rated at 150 Ohms (140 Ohms actual)
    Attenuation switch: 0 or 15dB attenuation
    Low Frequency response switch: (Flat) -6 db/octave below 115Hz, -18 dB/octave below 80Hz
    Phantom Power: 48 Vdc ±4 Vdc (IEC 268 15/DIN 45 596), positive pins 2 and 3
    Current Drain: 5.4 mA typical at 48 Vdc
    Common Mode Rejection: >50dB, 20Hz to 20kHz
    Polarity: Positive pressure on diaphragm produces positive voltage on output pin 2 relative to pin 3
    Sensitivity (typical, at 1000Hz; 1Pa = 94dB SPL): -37 dBV/Pa
    Self noise (typical, equivalent SPL; A weighted, IEC 651): 9.5dB
    Maximum SPL (1000Hz at 1% THD): 2500 Ohm load (Attenuator on): 138 (153)dB, 1000 Ohm load (Attenuator off): 133 (148)dB
    Output Clipping Level: (2500 Ohm load) 7dBV, (1000 Ohm load) 1dBV
    Dynamic Range: 2500 Ohm load (128dB), (1000 Ohm load) 123dB
    Signal to Noise ratio: 84.5dB

    Dimensions and Weight: 53.0mm (2.08") maximum body diameter; 156.2mm (6.15") long; 642g (22.6 oz.)
Warranty
MANUFACTURER'S WARRANTY
One year warranty on wireless mics, mixers, and circuitry products.
2 year warranty on wired mics.
Warranty terms vary. Check with manufacturer for specific product warranty.


  • Customer Reviews
Loading....
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.