Shure

collapse expand iconDescription

This Shure SLX Wireless Microphone System includes a Shure SLX4 Diversity Receiver, and a Shure SLX2/Beta87C Wireless Handheld Transmitter Microphone. It's a wireless system that offers the warm frequency response preferred by in-ear users.

Sound installations and working bands need powerful wireless tools that can be set up quickly and used confidently. Shure's rugged SLX Wireless Systems exceed these demands with innovative automatic setup features, such as auto frequency scan and transmitter setup, and exceptional wireless clarity. Supporting 20 compatible systems across multiple UHF frequency bands, Shure SLX wireless systems smoothly integrate into houses of worship, lecture halls, conference rooms, and mobile gear cases. SLX Wireless Systems feature Shure's patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless.

SLX4 Wireless Receiver
The Shure SLX4 wireless receiver is a breeze to use with Automatic Frequency Selection and Automatic Transmitter Setup. With included rack hardware and detachable antennas, it is ready for immediate installation right out of the box.

Shure SLX2/Beta87C Wireless Transmitter Microphone

The Shure SLX2/SM87C consists of the SLX wireless handheld transmitter fitted with the SM87C microphone capsule. The Shure SLX2 Wireless Handheld Transmitter includes timed backlit LCD display, frequency and power lockout, and "Mute" functionality. The SLX2 transmitter design allows for interchangeable microphone cartridges. The Beta 87C offers an extremely smooth, tailored response for a warm, natural sound. Cardioid polar pattern compensates for the isolation often associated with the use of personal monitors.
Shure SLX24/BETA87C Wireless Microphone System Band G4

collapse expand iconFeatures

SLX4 Wireless Receiver:
  • Automatic Frequency Selection
  • Automatic Transmitter Setup
  • 960 Selectable frequencies across 24MHz bandwidth
  • Detachable 1/4 wave antennas
  • Microprocessor-controlled diversity
  • RF presence LED
  • 5-segment audio meter
  • Multi-function, backlit LCD
  • Low battery indicator
  • Frequency and power lockout
  • Rugged metal chassis
  • Volume control on rear of unit
  • 1/2 rack design
  • Furnished rack hardware
  • Non-slip bumpers for use out of rack
  • XLR and 1/4" outputs
SM87C Cardioid Microphone
  • Cardioid, Condenser
  • Frequency response: 50 to 20,000 Hz
  • Highly consistent cardioid pattern offers excellent rear rejection
SLX2 Handheld Transmitter Microphone
  • Frequency response: 50 to 15,000 Hz
  • Automatic Transmitter Setup
  • 518 - 782 MHz operating range
  • Backlit LCD with timeout feature
  • Frequency and power lockout
  • 3-segment battery fuel gauge
  • 2 AA batteries (included) provide 8 hours of continuous use
warning

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.

collapse expand iconSpecs

SLX4 Wireless Receiver:
  • Audio Output Level (ref. ± 38kHz deviation with 1kHz tone): XLR connector (into 600 Ohm load): ”13dBV; 1/4" connector (into 3000 Ohm load): ”2dBV
  • Output Impedance: XLR connector: 200 Ohms; 1/4" connector: 1kohms
  • XLR output: Impedance balanced; Pin 1: Ground; Pin 2: (+); Pin 3: (-)
  • Sensitivity: ”105 dBm for 12 dB SINAD, typical
  • Image Rejection: >70 dB, typical
  • Power Requirements: 12”18 Vdc at 150 mA, supplied by external power supply
  • Operating Range Under Typical Conditions: 300 ft. (100m)
  • Note: Actual range depends on RF signal absorption, reflection, and interference
  • Audio Frequency Response (+/” 2 dB): Minimum: 45 Hz: Maximum: 15 kHz
  • Note: Overall system frequency depends on microphone element.
  • Total Harmonic Distortion (ref. +/” 38 kHz deviation, 1 kHz tone): 0.5%, typical
  • Dynamic Range: >100 dB A-weighted
  • Operating Temperature Range: ”18 degree C (0 degree F) to +50 degree C (+122 degree F)
  • Note: battery characteristics may limit this range
  • Dimensions (H x W x D): 1.65 x 7.76 x 5.28 in., (42 x 197 x 134 mm)
  • Weight: 1 lb. 13 oz. (816 g )
  • Housing: Galvanized steel
  • Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with
  • respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output.
  • Logic Connections: Pin 1: Logic output, Transmitter Mute Status. Mute=low (0 V). Sinks up to 100 mA. Absolute maximum -0.7 to 5.5V DC; Pin 2: Logic ground; Pin 3: Logic output, Battery Status. Good=low (0 V). Sinks up to 100 mA; Absolute maximum -0.7 to 5.5V DC
SLX2/Beta87C Wireless Transmitter Microphone
  • Audio Input Level: +2 dBV maximum at -10dB position; -8 dBV maximum at 0dB position
  • Gain Adjustment Range: 10dB
  • RF Transmitter Output: 30 mW maximum (dependent on applicable country regulations)
  • Dimensions Length x Diameter): 10 x 2 in. (254 x 51 mm)
  • Weight: 10.2 oz. (290 grams) without batteries
  • Housing: Molded PC/ABS handle and battery cup
  • Power Requirements: 2 "AA" size alkaline or rechargeable batteries
  • Battery Life: >8 hours (alkaline)