Skip to main content

Shure PSM 200 Wireless Personal Monitoring System with SE215 Earphones

Item #: 
1303774295983580643
  • Write a Review

PSM 200 Monitors are the personal monitor price breakthrough performers have been waiting for and a practical alternative to floor wedges for performers who want to start out In Ear and stay there. Fe... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email

Recommended Products
Overview

PSM 200 Monitors are the personal monitor price breakthrough performers have been waiting for and a practical alternative to floor wedges for performers who want to start out In Ear and stay there. Featuring smart, versatile components that grow with you as your needs change, PSM 200 is the personal monitoring breakthrough for entry-level performers. In ear is now in reach.

PSM 200 Wireless Personal Monitoring System Includes the Shure P2R Hybrid Bodypack Receiver and the Shure P2T Wireless TransMixer. Package includes the Shure SE215 Earphones.

P2R Hybrid Bodypack Receiver
The P2R Hybrid Bodypack Receiver is the world's first bodypack receiver to function as a wired receiver, a wireless receiver, or both at the same time. This and other unique features, along with excellent sound quality, make the P2R an exceptional value.

P2T Wireless TransMixer
The P2T Wireless TransMixer is another breakthrough design for personal monitoring. It allows the user to connect two line-level or mic-level inputs directly into the transmitter. The two signals can then be mixed independently. You can connect microphones or instruments directly to the inputs or use line outputs from a mixing console. In short, no matter what the output device, you can probably plug it into the TransMixer.

SE215 Earphones
Featuring a Dynamic MicroDriver, the SE215 delivers detailed sound with enhanced bass. A detachable cable with formable wire enables easy replacement and a secure, comfortable fit onstage or on-the-go. Sound Isolating sleeves in multiple sizes provide up to 37 dB of isolation and a customized fit. Evolved from personal monitor technology that's been road-tested by pro musicians, the SE215 offers detailed sound for personal listening or professional monitoring.

Consumer Alert:

Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCCs wireless microphone website at: www.fcc.gov/cgb/wirelessmicrophones.

FEATURES

P2R Hybrid Bodypack Receiver
Operates as a wired or wireless bodypack, or both simultaneously
Frequency locator
Built-in headphone limiter
Integrated cable management
High-impact plastic chassis
1/4" Line input jack with high/low gain switch

P2T Wireless TransMixer
Built-in audio limiter
Front mounted antenna
Two mic/line input channels for mix control
1/2 Rack space

SE215 Earphones
Detailed sound with enhanced bass
sound isolating design
Unmatched personalization and comfort
Single dynamic microdriver
Detachable cable with wireform fit
2-year limited warranty
Includes fit kit with sound isolating sleeves
Comes with soft-zip carrying case


SPECIFICATIONS
P2R Hybrid Bodypack Receiver
Operating Controls: Volume knob, Frequency select
LED Indicators: Power, RF reception, Frequency, Limiter, Low battery
RF Sensitivity: -109 dBm typical
Squelch Threshold: -102 dBm typical
Antenna: Attached Whip
Audio Input Connector: Connector Type: 1/4-inch Mono
Impedance: 1 megohm
Maximum Input Level: LO = +0 dBu; HI = 10 dBu
Frequency Response: 30 Hz to 20 kHz (+/-3 dB); earphone dependent
Power Requirements: 9 V alkaline battery, Duracell type MN1604 recommended
Battery Life: Volume Dependent
- Wired (RF Off): 6 hours
- Wireless (RF On): 4 hours
Audio Output Connector: 1/8 inch (3.5 mm)
Minimum Load Impedance: 8 ohms
Net Weight: 100 g (3.52 oz.), less battery
Overall Dimensions: 122 mm x 73 mm x 32 mm (4.809 in. x 2.875 in. x 1.251 in.)

P2T Wireless TransMixer
LED Indicators: Tri-color input level, Frequency
Operating Controls: Input level control, Frequency select
Inputs: Two Mic/line, XLR-1/4 in. combo input channels
Outputs: Two XLR split outputs
RF Output Power: 30 mW (+15 dBm) typical conducted (country dependent)
Modulation Limiter: Internal peak limiter (>10:1 hard knee compression)
Antenna: 1/4 Wavelength, semi-rigid, PCB Mount
P2T Audio Input:
Connector Type: XLR-1/4-inch combo
Configuration: electronically balanced
Actual Impedance: 1 kilohm
Nominal Input Level: 25 dBu @ 1/2 volume (12 o'clock)
Maximum Input Level: 5 dBu @ 1/2 volume (12 o'clock)
Pin Assignments:
- XLR: 2=hot; 3=cold, 1=ground
- 1/4: Tip = hot, Ring = cold, Sleeve=ground
Phantom Power Protection: Yes: Up to 52 VDC
Current: 170 mA maximum
Dimensions: 220 mm x 140 mm x 40 mm (8.6 in. x 5.6 in. x 1.7 in.)
Net Weight: 370 g (13 oz.)

P2T Audio Outputs:
Passive connection parallel with input: Connector Type: XLR
Configuration: electronically balanced
Pin Assignments: 2 = hot ; 3 = cold, 1 = ground
Phantom Power Protection Yes: Up to 52 Vdc
Power Requirements
Operating voltage 12-18 VDC
Supplied with one of the following external power supplies:
Model PS20: 120 VAC, 60 Hz input
Model PS20E, Model PS20UK: 230 VAC, 50/60 Hz input

SE215 Earphones
Speaker Type: Single Dynamic MicroDriver
Sensitivity (1kHz): 107 dB SPL/mW
Impedance (1kHz): 20 Î
Noise Attenuation: Up to 37 dB
Frequency Range: 22Hz - 17.5kHz
Input Connector: Gold-plated 3.5 mm (1/8")
Cable: 64" Detachable (at ear) with wireform fit
Color: Clear

Pro Coverage
MANUFACTURER'S WARRANTY
One year warranty on wireless mics, mixers, and circuitry products.
2 year warranty on wired mics.
Warranty terms vary. Check with manufacturer for specific product warranty.


  • Customer Reviews
Loading....

Review Snapshot

by PowerReviews
ShurePSM 200 Wireless Personal Monitoring System with SE215 Earphones
 
4.0

(based on 1 review)

Ratings Distribution

  • 5 Stars

     

    (0)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 1 customer

Displaying review 1

Back to Top

(2 of 3 customers found this review helpful)

 
4.0

Excellent Sound!

By Brian

from Bay City, MI

Comments about Shure PSM 200 Wireless Personal Monitoring System with SE215 Earphones:

My buddy suggested these in-ears. I've never used in-ear monitors but was getting a little tired of the wedge thing, not being able to hear my vox when I wanted/needed too, etc. I ordered blemished from GC so I got a little better deal than new and with going through the Ebates site, got another $27 or so back in cash...great deal! When I got these, unfortunately the power supply didn't work - wouldn't power up at all. My local GC replaced the one that arrived for free which was cool instead of returning the whole thing and ordering a new one. The construction of the transmitter seems flimsy - like it feels like there is nothing even in it, and it's plastic - so it'll be something to be careful with when you take it to shows. The earbuds that came with it fit great and don't slip at all while playing (and I move around a lot!). The transmitter is really solid, and has a low/high gain setting if you need a little boost. I didn't need it which was cool because that means if I ever DID, I have some more headroom. The sound is awesome - I was worried it was going to be thin and AM radio like but totally not the case. I run my mic into channel one, and run a monitor line to channel 2 so I can control my volume as well as the rest of the band in my ears - it's freaking awesome. I only wore one ear bud all night so I could keep some dynamics of the live performance and was completely able to hear myself crystal clear, as well as the rest of the guys. I only ran vocals into them as well - but I could see if you had the ability for separate monitor mixes (we don't on our PA), and everyone in the band was using these - it'd be totally the way to go. I was able to hear things I never heard when using wedges - mainly how good some of our vocals actually were - so a total confidence booster. If you're looking at trying in-ears, I'd totally recommend these. Four stars mainly because of the power supply issue, as well as the construction of the transmitter, but sound-wise, I'd give them a 5.

Displaying review 1

Back to Top

You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.