Shure PGXD2/SM86 Handheld Transmitter with SM86 Mic
Write a Review
The PGXD2/SM86 Handheld Transmitter with SM86 Mic is designed to meet the needs of the traveling performer by pairing an industry-standard handheld condenser vocal microphone with an exceptional trans... Read More
We're sorry—we no longer carry this item.
Find a similar product below or contact us for a recommendation of a great alternative.
The PGXD2/SM86 Handheld Transmitter with SM86 Mic is designed to meet the needs of the traveling performer by pairing an industry-standard handheld condenser vocal microphone with an exceptional transmitter for use with Shure's PGXD Wireless System.
The PGXD2 transmitter features automatic setup, a multi-function LED Indicator (power, lockout, mute, low battery), and provides you with 8 hours of continuous use on 2 AA batteries. It gives you and your microphone a generous 200' (60m) operating range without losing audio quality.
The Shure SM86 is a unidirectional (cardioid) condenser vocal microphone for professional use in live performance. An extremely rugged microphone, the SM86 withstands the rigors of touring while delivering a clear, studio-quality sound.
A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The built-in three-point shock mount minimizes handling noise, and a two-stage pop filter reduces wind and breath "pop" noise.
Besides the SM86 microphone and PGXD2 handheld transmitter you also get a padded carrying case and a microphone clip.
PGXD2 Handheld Transmitter PGXD2 Handheld Transmitter Power, mute, and battery status LED
Up to 9 hours of continuous use from 2 AA batteries
Excellent choice for stage monitors and personal monitors
Built-in three-point shock mount minimizes handling noise
PGX2 Handheld Transmitter Audio Input Level: +2 dBV maximum at “10dB position “8 dBV maximum at 0dB position Gain Adjustment Range: 10dB RF Transmitter Output: 30 mW maximum (dependent on applicable country regulations) Dimensions including SM58 cartridge: 254mm x 51mm dia. (10" x 2") Weight: 290g (10.2oz.) without batteries Housing: Molded PC/ABS handle and battery cup Power Requirements: 2 AA size alkaline or rechargeable batteries Battery Life: > 8 hours (alkaline)
SM86 microphone Transducer Type: Condenser (electret bias) Frequency Response: 50 to 18,000Hz Polar Pattern: Cardioid Output Impedance: 150? at 1 kHz Recommended minimum load impedance: 600? Sensitivity (at 1,000Hz): Open Circuit Voltage: -50 dBV/Pa (3.15 mV) (1 Pa = 94 dB SPL) Output Clipping Level: 1000? Load at 1,000Hz: +3 dBV (1.41V) Maximum SPL (at 1,000Hz): 1000 ? load (1% THD): 147 dB Self-Noise: 23dB typical, A-weighted Dynamic Range (1000 ?): 124dB (maximum SPL to A-weighted noise level Signal-to-Noise Ratio: 71dB at 94dB SPL (IEC 651)* *S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted. Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector Power: Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3 Current Drain: 5.2 mA Connector: Three-pin (XLR) professional audio Case: Dark gray enamel-painted steel with matte-finished silver colored steel grille Net Weight: 278g (9.8oz) Environmental Conditions Operating: -18 to 60 C (0 to 135 F) (relative humidity >90%) Storage: -29 to 74 C (-20 to 165 F) (relative humidity >80%)
One year warranty on wireless mics, mixers, and circuitry products. 2 year warranty on wired mics. Warranty terms vary. Check with manufacturer for specific product warranty.