Shure

collapse expand iconDescription

The Shure Microflex MX395B/O Low Profile Boundary microphone is an ideal table microphone when minimal presence is of high priority. It is perfect for boardrooms, meeting rooms, and other sites where aesthetics are important. This MX395 mic is only 1 in. (2.5 cm) in diameter, and extends just 2 cm above the mounting surface when installed, yet it delivers clear, high quality sound. Choose from a selection of colors and pickup patterns for customized table installations.
Shure MX395B Microflex Low Profile Boundary Microphone Omni
Shure MX395B Microflex Low Profile Boundary Microphone Omni

collapse expand iconFeatures

  • Only 1.25 inch (3.8 cm) in diameter
  • Omnidirectional polar pattern
  • Wide dynamic range and smooth frequency response
  • Logic input for remote LED control
  • Radio Frequency filtering CommShield Technology
  • Includes rubber isolation rings and fastening hex nut

collapse expand iconSpecs

  • Type: Condenser (electret bias)
  • Frequency Response: 50”17000 Hz
  • Polar Pattern: Omnidirectional
  • Output Impedance: EIA Rated at 150 Ohms (170 Ohms actual)
  • Output Configuration: Active balanced
  • Sensitivity (at 1 kHz , open circuit voltage): ”28 dBV/Pa (42 mV) 1 Pascal=94 dB SPL: Maximum Sound Pressure Level (1 kHz at 1% THD, 1 kOhms load): 114 dB
  • Equivalent output Noise (A-weighted): 21 dB SPL
  • Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz): 73 dB
  • Dynamic Range (1 kOhms load at 1 kHz): 93 dB
  • Common Mode Rejection (10 Hz”100 kHz): 45 dB minimum
  • Preamplifier output Clipping level (1% THD): ”8 dBV (0.4 V)
  • Polarity: 3-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector
  • Weight Net: 0.30 lbs. (0.136 kg)
  • Logic Connections: LED IN: Active low (‰¤1.0V), TTL compatible. Absolute maximum voltage:-0.7V to 50V.
  • Environmental Conditions: Operating Temperature: -18”57 C (0”135 degrees F); Storage Temperature: -29”74 degrees C (-20”165 degrees F); Relative Humidity: 0”95%
  • Power Requirements : 11”52 Vdc phantom, 2.0 mA

collapse expand iconWarranty

One year warranty on wireless mics, mixers, and circuitry products.
2 year warranty on wired mics.
Warranty terms vary. Check with manufacturer for specific product warranty.

Featured Articles