Shure M25C DJ Phono Cartridge  

Item #: 
1274741995716133178
  • Write a Review

The Shure M25C DJ phono cartridge is a fundamental, mix/spin needle capable of delivering high output, solid bass, and transparent midrange performance for virtually any DJ application. Designed using... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Recommended Products
Overview

The Shure M25C DJ phono cartridge is a fundamental, mix/spin needle capable of delivering high output, solid bass, and transparent midrange performance for virtually any DJ application. Designed using the same Type I cantilever technology used by Shure's 35 Series, the M25C offers high-definition sound reproduction at all audible frequencies, and tracks with a force of 1.5 to 3 grams to provide high skip-resistance while keeping record wear to a bare minimum. Maintains an essentially flat frequency response from 20Hz-20kHz. Backed by a full one-year warranty, each M25C DJ turntable cartridge includes an extra set of 4 headshell wires, a stylus cleaning brush, user's guide, all mounting hardware, and a stylus guard.

Features
  • 1.5 to 3-gram tracking force range for skip resistance
  • Type 1 cantilever design offers high-definition sound at all frequencies
  • Delivers high output, solid bass, transparent midrange
  • High-definition reproduction at all audible frequencies
  • Essentially flat frequency response from 20Hz-20kHz
  • One year warranty
  • Includes an extra set of 4 headshell wires, a stylus cleaning brush, user's guide, all mounting hardware, and a stylus guard
Specifications
  • Tone arm mount: standard 1/2"
  • Cartridge type: moving magnet
  • Output voltage: typical at 1 kHz, 5.0 mV RMS at 5cm/sec peak velocity
  • Recommended load: 47 kOhms in parallel with 250pf
  • Tracking force: Effective at stylus tip; Range: 1.5 to 3.0 grams
  • Stylus cantilever: Shure type 1: low mass; heat-treated aluminum alloy/tubular; 1.0-mil wall thickness/30-mil diameter
  • Diamond stylus tip: Polished natural gemstone: spherical; radius: 0.7mm
  • Frequency Response: Essentially flat from 20Hz-20kHz
  • Stereo Channel Balance: Within 2dB
  • Channel separation: Typical at 1kHz: 20dB
  • Net Weight: 6.2 grams
  • Height: 15.9mm
Warranty
MANUFACTURER'S WARRANTY
One year warranty on wireless mics, mixers, and circuitry products.
2 year warranty on wired mics.
Warranty terms vary. Check with manufacturer for specific product warranty.


  • Customer Reviews
Loading....

Review Snapshot

by PowerReviews
ShureM25C DJ Phono Cartridge
 
1.0

(based on 1 review)

Ratings Distribution

  • 5 Stars

     

    (0)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (1)

Reviewed by 1 customer

Displaying review 1

Back to Top

(5 of 6 customers found this review helpful)

 
1.0

A very low quality solution - avoid.

By Rick

from Arizona

Comments about Shure M25C DJ Phono Cartridge:

Pass this one by. If the M25C is any example of the quality Shure is putting into current products, consider another manufacturer altogether. Yes, I know. Shure used to make excellent stuff. The M25C arrived here undamaged, with the stylus badly mis-aligned (about 20 degrees off vertical as seen front the front). It's was improperly assembled and the error was not caught. So much for quality control at Shure. Sorry for the negative review, but that's my story.

Displaying review 1

Back to Top

You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.