Shure KSM141 Dual Pattern Condenser Mic  

Item #: 
1279078742006402871
  • Write a Review

The KSM141 is a dual-pattern end-addressed condenser microphone with a rotating collar, allowing easy switching between a consistent cardioid or true omnidirectional polar pattern for smooth and extre... Read More

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Recommended Products
Overview

The KSM141 is a dual-pattern end-addressed condenser microphone with a rotating collar, allowing easy switching between a consistent cardioid or true omnidirectional polar pattern for smooth and extremely focused sound reproduction.

Designed for studio use, yet rugged enough for live applications, the KSM141 can withstand extremely high sound pressure levels (SPL). Its low self-noise and extended frequency response make it ideal for recording musical instruments.

Features
  • A mechanical polar pattern switch for highly consistent cardioid and true omnidirectional polar patterns provides flexibility in a wide variety of recording applications
  • Ultra-thin, 2.5 micron, 24 karat gold-layered, low-mass Mylar diaphragm for superior transient response
  • Class A, discrete, transformerless preamplifier for transparency, extremely fast transient response, no crossover distortion, and minimal harmonic and intermodulation distortion
  • Premium electronic components, including gold-plated internal and external connectors
  • Subsonic filter eliminates low frequency rumble (less than 17Hz) caused by mechanical vibration
  • Three-position switchable pad (0dB, 15dB, and 25dB) for handling extremely high sound pressure levels (SPLs)
  • Three-position switchable low-frequency filter to reduce background noise and counteract proximity effect
Performance Characteristics
  • Extended frequency response
  • Low self-noise
  • Exceptional reproduction of low-frequency sounds
  • Can withstand high sound pressure levels (SPL)
  • High output level
  • No crossover distortion
  • Uniform polar response
  • Superior common mode rejection and suppression of radio frequency interference
Applications
  • Acoustic instruments: such as piano, guitar, drums, percussion, strings
  • Wind instruments: brass and woodwind
  • Low frequency instruments: such as double bass, electric bass, kick drum
  • Overhead miking: drums or percussion
  • Ensembles: choral or orchestral
  • Room ambiance pick-up: guitar amplifier or drums
Specifications
  • Cartridge type: Permanently biased condenser
  • Frequency response: 20 to 20,000Hz
  • Directional polar pattern: Cardioid/omnidirectional
  • Output impedance: 150Ω (actual)
  • Attenuation switch: 0dB, 15dB, or 25dB attenuation
  • Low frequency response switch: Flat; -6db/octave below 115Hz, -18dB/octave below 80Hz
  • Phantom power: 48 Vdc ± 4 Vdc (IEC 268 15/DIN 45 596), positive pins 2 and 3
  • Current drain: 4.65 mA typical at 48 Vdc
  • Common mode rejection: ≥50dB, 20Hz to 20kHz
  • Polarity: Positive pressure on diaphragm produces positive voltage on output pin 2 relative to pin 3
  • Dimensions and weight:
  • 20mm (0.8") diameter, 146mm (5.75") long
  • 156g (5.5oz.)
  • Sensitivity (typical, at 1000Hz; 1 Pa = 94dB SPL): -37dBV/Pa
  • Self noise (typical, equivalent SPL; A-weighted, IEC 651): 14dB
  • Maximum SPL:
  • 5000Ω load (Attenuator on): 145 (160, 170)dB
  • 2500Ω load (Attenuator on): 139 (154, 164)dB
  • 1000Ω load (Attenuator on): 134 (149, 159)dB
  • Output clipping level*:
  • 5000Ω load: 15dBV
  • 2500Ω load: 9dBV
  • 1000Ω load: 3dBV
  • *20Hz to 20kHz; THD < 1%. THD of the microphone preamplifier when applied input signal is equivalent to the cartridge output at specified SPL.
  • Dynamic range:
  • 5000Ω load: 131dB
  • 2500Ω load: 125dB
  • 1000Ω load: 120dB
  • 1000 ohm load: 120dB
  • Signal to Noise Ratio**: 80dB
  • **S/N ratio is the difference between 94dB SPL and equivalent SPL of self-noise A-weighted
Warranty
MANUFACTURER'S WARRANTY
One year warranty on wireless mics, mixers, and circuitry products.
2 year warranty on wired mics.
Warranty terms vary. Check with manufacturer for specific product warranty.


  • Customer Reviews
Loading....
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.