The Shure 515BSLX is a dynamic (moving coil), low-impedance, cardioid (unidirectional) microphone designed for mounting on a gooseneck or fixed stand with a 5/8 in.-27 thread. The cardioid pickup patt... Click To Read More About This Product
We're sorry—we no longer carry this item.
Find a similar product below or contact us for a recommendation of a great alternative.
The Shure 515BSLX is a dynamic (moving coil), low-impedance, cardioid (unidirectional) microphone designed for mounting on a gooseneck or fixed stand with a 5/8 in.-27 thread. The cardioid pickup pattern provides excellent voice reproduction with effective rejection of feedback and background noise. The 515BSLX microphone is especially suitable for use in communications, paging, and talkback systems. The 515BSLX is supplied with a slide switch controlling the microphone audio and a relay circuit, permitting hands-free operation. It comes with a 6 ft (1.8 m) four-conductor, 2-conductors shielded, cable, and is wired with the microphone circuit normally open for use in parallel-wired microphone installations.
Rolled-off low-frequency response combined with a smooth high-frequency rise for clear and intelligible voice pickup
Shock-mounted cartridge for quiet operation and low stand/handling noise
Neodymium magnet for high signal-to-noise ratio
Heavy-duty zinc, die-cast, locking, metal grille protects cartridge and resists wear
Built-in slide switch controls both microphone circuit and relay or control circuit
Backed by the Shure 2-years warranty
Type: Dynamic (moving coil) Frequency Response: 80 to 15,000 Hz Polar Pattern: Cardioid (unidirectional). Effective rejection of sound at rear of microphone is uniform at all frequencies, while front pickup characteristics are uniform about axis Impedance: 150 Ohms rated (180 Ohms actual) Output Level (at 1,000 Hz): Open Circuit Voltage*: ”57.0 dBV/Pa* (0.14 mV) (*1 Pa=94 dB SPL) Switch: Built-in, double-pole double-throw slide switch. Lockplate to lock switch ON Shock Mount: Internal rubber vibration isolator Cable: Highly durable, retractable cable with effective hum shielding, four conductors (two shielded), neoprene jacketed with 5-pin connector Cable Length: 13 in. (330 mm) retracted; 6 ft (1.83 m) extended Case: Silver finish die casting with black enamel diecast grille and stainless steel screen Dimensions (Length x diameter): 6.5" x 1.5" (16.5 x 3.75 cm) Net weight: 13.5 oz. (380 g)
One year warranty on wireless mics, mixers, and circuitry products. 2 year warranty on wired mics. Warranty terms vary. Check with manufacturer for specific product warranty.