(Based on 
Searching serial numbers
CONSUMER ALERT
Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC�s wireless microphone website at http://www.fcc.gov/cgb/wirelessmicrophones.
Engineered for the most demanding touring applications.
The Shure UR14S Bodypack Wireless Instrument Microphone System features the UR4S Single Channel Diversity Receiver, the UR1 Wireless Bodypack Transmitter, and the WA302 Instrument Cable. The UHF-R is a professional, wireless technology engineered for the most demanding touring environments and installations. UHF-R wireless systems offer unprecedented flexibility and versatility. Using multiple frequency bands, over 160* compatible systems can be used simultaneously. Individual frequency bands deliver up to 40* compatible systems per band. The UHF-R includes infrared synchronization that allows you to configure transmitter settings from the receiver, as well as these outstanding features:
*Dependent on frequency regulations by country and actual spectrum usage including TV.
Frequency Band Selection
Shure offers wireless microphone systems in a selection of bands that conform to the different government regulations of specific nations or geographic regions. These regulations help limit radio frequency (RF) interference among different wireless devices and prevent interference with local public communications channels, such as television and emergency broadcasts. The system's band and frequency range are identified on the face of the receiver and transmitter.
Groups and Channels
To transmit audio through a wireless system, the transmitter and receiver must be set to the same radio frequency, or channel. A wide selection of channels allows more microphones to be used at the same time, since each microphone must operate on a different channel. It also provides a greater choice of open channels--those that are free from interference from television broadcasts, electronic devices, or other wireless systems. A group is a selection of compatible channels. Wireless Shure microphones work better together when set to channels in the same group.
Automatic Frequency Selection
The following features scan the RF environment to find the best group and channel settings for a particular installation.
•Group Scan--finds the group with the most open channels, then sets all networked receivers to channels in that group
•Channel Scan--finds the first open channel in the currently selected group and sets the receiver to that channel
Automatic Transmitter Sync
This feature automatically transfers the group and channel settings from a receiver to a transmitter. You can also program other transmitter settings on a receiver and transfer those settings too.
Interface Lock
This feature locks the receiver and transmitters so that users cannot change settings. The transmitter power switch can also be disabled so that the transmitter remains on if the power switch is accidentally toggled during a performance.
Audio Gain Structure
The following settings allow you to adjust audio gain throughout the system:
• Sensitivity (bodypack only). A 25 dB range of gain adjustment at the bodypack transmitter input
•Transmitter Gain. A 30dB range of audio gain adjustment within the transmitter (affects audio level at the receiver, as indicated by
the Audio LEDS.)
•Output Level. 32 dB of attenuation at the receiver output, plus a mute setting
•—30 dB pad for matching audio levels at the receiver XLR output
Networking
Each receiver has an RJ-45 port on the back for connecting to other receivers over an Ethernet network. Networking receivers allows you to automatically set channels for all the receivers with a single group scan command. You can also control and monitor all networked receivers through the Shure Wireless Workbench PC software.
Shure Wireless Workbench Software
The Shure Wireless Workbench software on the supplied CD includes a variety of useful tools for installing and managing multiple wireless systems. Simply install the software on your computer and connect it to a network of receivers to monitor and control receivers and transmitters throughout the network.
UR4S Single Channel Diversity Receiver
The UR4S Single Channel Diversity Receiver has the latest in wireless technologies including Shure's patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology. The UR4S receiver provides advanced control and robust flexibility for a wide range of professional uses.
UR1 Wireless Bodypack Transmitter
The UR1 transmitter is Shure's most compact bodypack, constructed of lightweight and rugged magnesium to be exceptionally unobtrusive and abuse-resistant.
WA302 Instrument Cable
The WA302 instrument cable connects the ULX1 body-pack transmitter to a guitar or other instrument. Features a 2.5 foot (.75 m), length with 1/4-inch plug and 4-pin mini connector (TA4F).
Based on 
