CONSUMER ALERT
Most users do not need a license to operate this wireless microphone system. Nevertheless,
operating this microphone system without a license is subject to certain restrictions:
the system may not cause harmful interference; it must operate at a low power level
(not in excess of 50 milliwatts); and it has no protection from interference received
from any other device. Purchasers should also be aware that the FCC is currently
evaluating use of wireless microphone systems, and these rules are subject to change.
For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit
the FCC’s wireless microphone website at
http://www.fcc.gov/cgb/wirelessmicrophones.
Shure quality at an affordable price.
The Shure ULXS4 standard wireless receiver offers an exceptional value in both performance and price, for both working musicians and sound installers. The feature set of the versatile ULXS4 receiver offers a direct path to full, clear audio signals, unencumbered and unattached.
With our
Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!
Shure ULXS4 Standard Wireless Receiver Features:
- Automatic Frequency Selection with group scan function
Over 1400 selectable frequencies
5-segment transmitted audio signal strength meter
RF indicator
3-segment transmitter battery fuel gauge
Advanced multi-function LCD displays group and channel
Mic/Line switch
Remotable 1/2-wave antenna
XLR and 1/4-inch output
Rugged plastic chassis
1/2 rack design
Shure ULXS4 Standard Wireless Receiver Specifications:
- RF Carrier Frequency Range
554.000 to 865.000 MHz (Available frequencies depend on the applicable regulations in the country where the system is
used). Refer to the frequency supplement supplied with the system.
Effective Range
100 m (300 ft.) under optimal conditions
NOTE: Actual working range depends on RF signal absorption, reflection, and interference
Audio Frequency Response
25 to 15,000 Hz, ±2 dB
NOTE: Overall system frequency response depends on the microphone element.
Receiver Input
Connector: Antenna; Power Input
Connector Type: Antenna: BNC; Power Input IEC 320
Actual Impedance: Antenna: 50; Power Input: ——
Nominal Input Level: Antenna: —95 to —30 dBm; Power Input: 15 Vdc
Maximum Input Level: Antenna: +6 dBm (—20 dBm recommended); Power Input: 18 Vdc
Pin Assignments: Antenna: Shell = Ground Center = Signal; Power Input: IEC Standard
Voltage for Remote Power: Antenna: 12 Vdc, 150 mA maximum; Power Input: ——
Receiver Output
Connector: Antenna: High Z Audio; Power Input: Low Z Audio*
Output Configuration: Antenna: Unbalanced (1/4 in.); Power Input: Balanced (XLR)
Actual Impedance: Antenna: 3 kohms; Power Input: 22 Ohms
Pin Assignments: Antenna: Tip = Hot Ring/ Sleeve = Gnd; Power Input: 1 = Ground 2 = Hot, 3 = Cold
Voltage/Current/Phantom Power Protection: Antenna: Yes; Power Input: Yes
*Output Level: Microphone Level = Line Level — 20 dB
Shure ULXS4 Standard Wireless Receiver
One year warranty on wireless mics, mixers, and circuitry products.
2 year warranty on wired mics.
Warranty terms vary. Check with manufacturer for specific product warranty.
Get your gear covered!
Now you can get added warranty protection for your new gear. Pro Coverage steps
in where the manufacturer's "normal wear and tear" ends. Our PRO COVERAGE program
offers you UPGRADED COVERAGE if your product ever fails!
Pro Coverage includes:
- Accidental damage protection (new gear only)
- Expedited Repair
- Free Shipping (for returns or repairs)
- 100% Coverage for Commercial Use
- Extended Return Period
- Extended Price Protection
- No Lemon Guarantee
- Free Transfer of Coverage to a new owner
- Repair Costs Covered for up to 3 years from date of purchase
- Repairs Can Be Authorized Toll-Free by Phone or the via the web
