An upgraded breakthrough in performance and price for both working musicians and professional sound installers.

The ULXS14S Wireless Guitar/Bass System with Audio-Technica AT892C Headset Microphone Kit includes the ULX1 Bodypack Transmitter (microphone not included), ULXS4 Standard Diversity Receiver, WA302 Cable and the Audio-Technica AT892C Headset Microphone.

ULXS4 Receiver
The Shure ULXS4 Wireless Diversity Receiver delivers affordable, frequency-agile UHF wireless, giving you clear channels and strong transmission so you can concentrate on your music. The receiver's automatic frequency selection scans for open channels. Ultrawide UHF band agility operates across multiple TV channels for clear operation anywhere. Shure microprocessor-controlled Predictive Diversity anticipates and avoids sound dropouts. A multifunction LCD display indicates group and channel settings, current UHF TV channel, and remaining transmitter battery power. LED indicators confirm RF reception and level, as well as transmitter audio level. Transmitter has a backlit LCD display, provides extended 8-hour battery life, and an operating range up to 300 feet.

ULX1 Wireless Bodypack Transmitter
The low-profile, highly durable body-pack ULX1 has all the characteristics to meet the demands of high performance. For use with headworn, lavalier and instrument microphones, as well as guitars and basses. Attaches to belt, waistband or guitar strap with clip for hands-free mobility.

The AT892C MicroSet Condenser Headworn Microphone
Perfect for stage, television, and houses of worship with an inconspicuous lightweight under-ear design that doesn't interfere with stage presence and provides ultimate comfort and ultra-secure fit. With a capsule diameter of just 1/10", the Audio-Technica microset provides the ultimate in low-profile, high-performance audio. Flexible, lightweight contoured loop hooks behind the ear for a secure, comfortable fit with or without glasses. Delivers the industry-standard sound quality you've come to expect from Audio-Technica. This wireless headset microphone has a rugged construction to meet the challenges of day-to-day use in production, house-of-worship, and theater settings.

Shure ULXS14 Instrument Frequency Selectable Wireless System with AT892C Headset Microphone Kit Features:

strong>ULXS4 Wireless Diversity Receiver
Automatic Frequency Selection with group scan function
Over 1400 selectable frequencies
5-segment transmitted audio signal strength meter
RF indicator
3-segment transmitter battery fuel gauge
Advanced multi-function LCD displays group and channel
Mic/Line switch
Remotable 1/2-wave antenna
TA4F and 1/4-inch output
Rugged metal chassis
1/2 rack design
ULX1 Wireless Bodypack Transmitter
Three-segment battery fuel gauge
Frequency and power lockout
Flexible 1/4 wave antenna
TA4F mini four-pin input connector
Backlit LCD display shows group and channel setting
Adustable audio gain control
Input attenuation switch (selects 0 dB or -20 dB attenuation)
PEAK icon appears when audio input overloads the transmitter
Power on/off switch
8 hour battery life (9V battery)
300 foot (100m) operating range
The AT892C Microphone
Comfy, secure fit
Minimum visibility
Omnidirectional condenser capsule
Super-high sound quality with maximum intelligibility and natural vocal reproduction

Shure ULXS14 Instrument Frequency Selectable Wireless System with AT892C Headset Microphone Kit Specifications:

ULXS4

RF Carrier Frequency Range
554.000 to 865.000 MHz (Available frequencies depend on the applicable regulations in the country where the system is used).
Refer to the frequency supplement supplied with the system.
Effective Range
100 m (300 ft.) under optimal conditions
NOTE: Actual working range depends on RF signal absorption, reflection, and interference
Audio Frequency Response
25 to 15,000 Hz, ±2 dB
NOTE: Overall system frequency response depends on the microphone element.

Receiver Input
Connector: Antenna Power Input
Connector Type: BNC IEC 320
Actual Impedance: 50 ohms
Nominal Input Level: 95 to 30 dBm 15 Vdc
Maximum Input Level: +6 dBm
( 20 dBm recommended) 18 Vdc
Pin Assignments: Shell = Ground
Center = Signal IEC Standard
Voltage for Remote Power: 12 Vdc, 150 mA maximum

Receiver Output
Connector: High Z Audio Low Z Audio*
Output Configuration: Unbalanced (1/4 in.) Balanced (TA4F)
Actual Impedance: 3 kohms 22 ohms
Nominal Input Level:
Pin Assignments: Tip = Hot
Ring/ Sleeve = Gnd 1 = Ground2 = Hot
3 = Cold
Voltage/Current/Phantom Power Protection? Yes Yes
22

Transmitter Audio Polarity
Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive volt-
age on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output
Receiver Audio Output Level (±38 kHz deviation, 1 kHz tone)
TA4F connector (into 600 ohm load): +3.9 dBV (line), 17 dBV (mic)
1
/4 inch connector (into 3000 ohm load): 2 dBV
Impedance (output): 50 ohms at line level; 2000 ohms at mic level
Modulation: ±38 kHz deviation compressor-expander system with pre- and de-emphasis.
Dynamic Range : >100 dB, A-weighted
RF Sensitivity : 1.26 _V for 12 dB SINAD (typical)
Image Rejection : 80 dB typical
Spurious Rejection : 75 dB typical
Ultimate Quieting (reference ±38 kHz deviation): >105 dB, A-weighted
System Distortion (reference ±38 kHz deviation, 1 kHz modulation)
0.3% total harmonic distortion, typical
Power Requirements: 14 - 18 Vdc (negative ground), 550 mA
Battery Life: 8 to 9 hours (with 9V alkaline battery)
Operating Temperature Range
: 20ø to 49ø C ( 4ø to 120ø F)
NOTE: Battery characteristics may limit this range.
Overall Dimensions: 43 mm H x 214 mm W x 163 mm D (1.72 in. x 8.56 in. x 6.52 in.)
Net Weight: 1049 g (2 lbs, 5 oz.)

ULX1 Wireless Bodypack Transmitter

RF Carrier Frequency Range: 554.000 to 865.000 MHz
Effective Range: 100 m (300 ft.) under optimal conditions
NOTE: Actual working range depends on RF signal absorption, reflection, and interference
Audio Frequency Response: 25 to 15,000 Hz, ±2 dB
NOTE: Overall system frequency response depends on the microphone element.
*Output Level: Microphone Level = Line Level 20 dB
Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch ou
Transmitter Gain Adjustment Range: 25 dB
Receiver Audio Output Level (±38 kHz deviation, 1 kHz tone)
TA4F connector (into 600 ohm load): +3.9 dBV (line), 17 dBV (mic)
1/4 inch connector (into 3000 ohm load): 2 dBV
Impedance (input): 1 Megohm
Modulation: ±38 kHz deviation compressor-expander system with pre- and de-emphasis.
RF Power Output: 30 mW maximum
Dynamic Range: >100 dB, A-weighted
RF Sensitivity: 1.26 _V for 12 dB SINAD (typical)
Image Rejection: 80 dB typical
Spurious Rejection: 75 dB typical
Ultimate Quieting (reference ±38 kHz deviation): >105 dB, A-weighted
System Distortion: (reference ±38 kHz deviation, 1 kHz modulation)
0.3% total harmonic distortion, typical
Power Requirements: 9V alkaline battery (Duracell MN1604 recommended); 8.4V Nicad optional
Battery Life: 8 to 9 hours (with 9V Duracell MN1604 alkaline battery)
Operating Temperature Range
-20ø to 49ø C ( 4ø to 120ø F)
NOTE: Battery characteristics may limit this range.
Dimensions: 96.5 mm H x 67 mm W x 26.7 mm D (3.86 x 2.68 x 1.10 in.)
Weight: 79 g (2.8 oz.) without battery