Professional grade.

View all items from this brand

The Shure ULXP24D/BETA 87 Wireless Microphone System includes two ULXP4 Diversity Receivers, and two ULX2 Handheld Transmitters fitted with Beta 87C Mic capsules. The ULX Professional wireless systems offer advanced features and controls, including lockable settings and group scan function. Over 1400 selectable, pre-programmed frequencies are available, and Automatic Frequency Selection provides a straight shot to a clear channel. ULXP4 Wireless Diversity Receiver The expanded feature set of the ULXP4 wireless receiver, with advanced settings and controls including lockable settings and group scan, offers a direct path to full, clear audio signals. The ULXP4 offers an exceptional value in both performance and price, for both working musicians and sound installers.ULX2 Handheld TransmitterThe ULX2 Handheld Transmitter features 3-segment battery fuel gauge, frequency and power settings, and control lockout. A backlit LCD shows group and channel.Beta 87C Vocal MicrophoneThe Beta 87C premium vocal microphone delivers studio-grade performance and a smooth, extended high-end frequency response in a cardioid condenser design. The microphone adds warmth to the frequency response and creates an ideal environment for in ear personal monitoring. And its highly consistent cardioid pattern offers excellent rear rejection.

With our Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!

Shure ULXP24D/BETA87C Dual Handheld Wireless Microphone System Features:

ULXP4 Wireless Diversity ReceiverAutomatic Frequency Selection with group scan functionOver 1400 selectable frequenciesPredictive Diversity5-segment transmitted audio signal strength meter5-segment RF meter3-segment transmitter battery fuel gaugeAdvanced multi-function LCD displays group and channelMic/Line switchRemotable 1/2-wave antennaFrequency and volume lockoutXLR and 1/4-inch outputRugged metal chassis1/2 rack designULX2 Handheld Transmitter8-9 Hour Battery LifePower: On/Off Switch, BatteryLED-Green When ON, Red When Battery LowThree-segment Battery Power IconPEAK Icon-Appears When Audio Signal OverloadsGroup/Channel DisplaysSET Button for Saving SettingsAdjustable Audio Gain ControlInput Attenuation Switch-Select 0dB for Voice/Low Output; 20dB for High Output4-pin Mini ConnectorBattery Cover Unscrews to Expose Battery and Gain Control9V Battery Included Beta 87C Vocal MicrophoneSmooth, wide frequency response with slight presence riseUniform cardioid polar pattern for maximum isolationMinimum off-axis tone colorationLow-frequency roll-off compensates for proximity effectThree-stage pop filter minimizes breath pop and noiseBreak-resistant stand adapterFrequency response: 50 - 20,000 Hz

Shure ULXP24D/BETA87C Dual Handheld Wireless Microphone System Specifications:

RF Carrier Frequency Range: 554.000 to 865.000 MHz (Available frequencies depend on the applicable regulations in the country where the system isused). Refer to the frequency supplement supplied with the system.Effective Range: 100 m (300 ft.) under optimal conditions (NOTE: Actual working range depends on RF signal absorption, reflection, and interference)Audio Frequency Response: 25 to 15,000 Hz, ± 2dB (NOTE: Overall system frequency response depends on the microphone element.)ULXP4 Receiver InputConnector: Antenna Power InputConnector Type: BNC IEC 320Actual Impedance: 50 OhmsNominal Input Level: —95 to —30 dBm 15 VDCMaximum Input Level: +6 dBm (—20 dBm recommended) 18 VdcPin Assignments: Shell = Ground Center = Signal IEC StandardVoltage for Remote Power: 12 Vdc, 150 mA maximumULXP4 Receiver OutputConnector: High Z Audio; Low Z AudioOutput Configuration: High Z Audio Unbalanced (1/4 in.); Low Z Audio Balanced (XLR)Actual Impedance: High Z Audio 3 k0hms; Low Z Audio 22Nominal Input Level: High Z Audio Pin Assignments: Tip = Hot Ring/ Sleeve = Gnd: Low Z Audio 1 = Ground 2 = Hot 3 = ColdVoltage/Current/Phantom: Power Protection?: High Z Audio; Yes Low Z Audio YesULX2 Transmitter InputInput Configuration: Unbalanced, activeActual Impedance: 20 kohmsMaximum Input Level: 10 Vp—p (12 dBV) for 1% THD at minimum gain setting using 1 kHz signal.ULX2 Transmitter OutputActual Impedance: 50 OhmsNominal Output Level: 20 mWMaximum Output Level: 30 mWPin Assignments: Shell = Ground Center = SignalTransmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positivevoltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch outputTransmitter Gain Adjustment Range: ULX1: 25 dBReceiver Audio Output Level (± 38 kHz deviation, 1 kHz tone):XLR connector (into 600 ohm load): +3.9 dBV (line), —17 dBV (mic)1/4 inch connector (into 3000 ohm load): —2 dBVImpedance: ULX2 (input): 1 Megohm; ULXP4 (output): 50 ohms at line level; 2000 ohms at mic levelModulation: ±38 kHz deviation compressor-expander system with pre- and de-emphasis.RF Power Output: ULX2: 30 mW maximumDynamic Range: >100 dB, A-weightedRF Sensitivity: 1.26 uV for 12 dB SINAD (typical)Image Rejection: 80 dB typicalSpurious Rejection: 75 dB typicalUltimate Quieting (reference ± 38 kHz deviation): >105 dB, A-weightedSystem Distortion (reference ± 38 kHz deviation, 1 kHz modulation): 0.3% total harmonic distortion, typicalPower Requirements: ULX2: 9V alkaline battery; 8.4 V Nicad optional; ULXS4: 14 - 18 Vdc (negative ground), 550 mABattery Life: 8 to 9 hours (with 9V alkaline battery)Operating Temperature Range: - 20 degrees to 49 degrees C (- 4 degrees to 120 degrees F)NOTE: Battery characteristics may limit this rangeNOTE: Bodypack and Handheld Transmitters cannot be used simultaneouslyULXP4 Dimensions (H x W x D): 1.72 in. x 8.56 in. x 6.88 in. (43 mm x 214 mm x 172 mm)ULXP4 Weight: 2 lbs 7 oz. (1105 g)ULX2/BETA87C Dimensions (Length x Diameter): 8.8 x 2 in. (223.5 x 51 mm)ULX2/BETA87C Weight: 9.1 oz. (258 g) without batteryBeta 87C Vocal MicrophoneType: Condenser (electret bias)Frequency Response: 50 to 20,000 HzPolar Pattern: CardioidOutput Impedance: Rated at 150 ohms (100 Ohms actual +/- 20%) Recommended minimum load impedance: 800 ohmsSensitivity (at 1,000 Hz): Open Circuit Voltage: -51 dBV/Pa (2 mV)(1 Pa = 94 dB SPL)Output Clipping Level: 1000 Ohm Load at 1,000 Hz: -6 dBV (0.5 V)Maximum SPL: 139 dB at 1,000 Hz (0.25% THD, 1000 Ohm loadSelf-Noise: 22 dB typical, A-weighted; 24 dB typical, weighted per DIN 45 405(equivalent sound pressure level; measured with true rms voltmeter)Dynamic Range: 117 dB (maximum SPL to A-weighted noise level)Hum Sensitivity: -5 dB equivalent SPL, maximum, in a 1 mOe field (60 Hz)Signal-to-Noise Ratio: 72 dB at 94 dB SPL (IEC 651) (S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted.)Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector.Power: Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3; Current Drain: 1.0 to 1.2 mAConnector: Three-pin (XLR) professional audio

Shure ULXP24D/BETA87C Dual Handheld Wireless Microphone System

One year warranty on wireless mics, mixers, and circuitry products.
2 year warranty on wired mics.
Warranty terms vary. Check with manufacturer for specific product warranty.

Get your gear covered!

Now you can get added warranty protection for your new gear. Pro Coverage steps in where the manufacturer's "normal wear and tear" ends. Our PRO COVERAGE program offers you UPGRADED COVERAGE if your product ever fails!

Pro Coverage includes:

• Accidental damage protection (new gear only)
• Expedited Repair
• Free Shipping (for returns or repairs)
• 100% Coverage for Commercial Use
• Extended Return Period
• Extended Price Protection
• No Lemon Guarantee
• Free Transfer of Coverage to a new owner
• Repair Costs Covered for up to 3 years from date of purchase
• Repairs Can Be Authorized Toll-Free by Phone or the via the web