CONSUMER ALERT
Most users do not need a license to operate this wireless microphone system. Nevertheless,
operating this microphone system without a license is subject to certain restrictions:
the system may not cause harmful interference; it must operate at a low power level
(not in excess of 50 milliwatts); and it has no protection from interference received
from any other device. Purchasers should also be aware that the FCC is currently
evaluating use of wireless microphone systems, and these rules are subject to change.
For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit
the FCC’s wireless microphone website at
http://www.fcc.gov/cgb/wirelessmicrophones.
Professional grade.
The Shure ULXP24D/BETA58 Dual Handheld Wireless Microphone System includes two ULXP4 Diversity Receivers, and two ULX2 Handheld Transmitters fitted with Beta SM87A Mic capsules. Shure ULX Standard UHF systems represent a breakthrough in performance and price for both working musicians and professional sound installers. ULX Professional systems offer more advanced features and controls, including lockable settings and group scan function. Over 1400 selectable, pre-programmed frequencies are available, and Automatic Frequency Selection provides a straight shot to a clear channel. NOTE: Bodypack and Handheld Transmitters cannot be used simultaneously.
ULXP4 Wireless Diversity Receiver
The expanded feature set of the ULXP4 wireless receiver, with advanced settings and controls including lockable settings and group scan, offers a direct path to full, clear audio signals. The ULXP4 offers an exceptional value in both performance and price, for both working musicians and sound installers.
ULX2 Handheld Transmitter
The ULX2 Handheld Transmitter features 3-segment battery fuel gauge, frequency and power settings, and control lockout. A backlit LCD shows group and channel.
Beta 87A Vocal Microphone
The Shure Beta 57A is a high output supercardioid dynamic microphone designed for professional sound reinforcement and project studio recording. It maintains a true supercardioid pattern throughout its frequency range. This insures high gain-before-feedback, maximum isolation from other sound sources, and minimum off—axis tone coloration.
Excellent for acoustic and electric instruments as well as for vocals, the extremely versatile Beta 57A dynamic microphone provides optimal warmth and presence. Typical applications include drums, guitar amplifiers, brass, woodwinds and vocals.
With our
Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!
Shure ULXP24D/BETA87A Dual Handheld Wireless Microphone System Features:
- ULXP4 Wireless Diversity Receiver
Automatic Frequency Selection with group scan function
Over 1400 selectable frequencies
Predictive Diversity
5-segment transmitted audio signal strength meter
5-segment RF meter
3-segment transmitter battery fuel gauge
Advanced multi-function LCD displays group and channel
Mic/Line switch
Remotable 1/2-wave antenna
Frequency and volume lockout
XLR and 1/4-inch output
Rugged metal chassis
1/2 rack design
ULX2 Handheld Transmitter
8-9 Hour Battery Life
Power: On/Off Switch, Battery
LED-Green When ON, Red When Battery Low
Three-segment Battery Power Icon
PEAK Icon-Appears When Audio Signal Overloads
Group/Channel Displays
SET Button for Saving Settings
Adjustable Audio Gain Control
Input Attenuation Switch-Select 0dB for Voice/Low Output; 20dB for High Output
4-pin Mini Connector
Battery Cover Unscrews to Expose Battery and Gain Control
9V Battery Included
Beta 87A Vocal Microphone
Tailored frequency response provides drums, guitars, vocals, and horns with studio quality sound
Uniform supercardioid pattern for high gain-before-feedback and superior rejection of off—axis sound
Hardened steel mesh grille that facilitates use of proximity effect and resists wear and abuse
Neodymium magnet for high signal—to—noise ratio output
Minimally affected by varying load impedance
Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
Legendary Shure quality and reliability
Shure ULXP24D/BETA87A Dual Handheld Wireless Microphone System Specifications:
- RF Carrier Frequency Range: 554.000 to 865.000 MHz (Available frequencies depend on the applicable regulations in the country where the system is
used). Refer to the frequency supplement supplied with the system.
Effective Range: 100 m (300 ft.) under optimal conditions (NOTE: Actual working range depends on RF signal absorption, reflection, and interference)
Audio Frequency Response: 25 to 15,000 Hz, ± 2dB (NOTE: Overall system frequency response depends on the microphone element.)
ULXP4 Receiver Input
Connector: Antenna Power Input
Connector Type: BNC IEC 320
Actual Impedance: 50 Ohms
Nominal Input Level: —95 to —30 dBm 15 VDC
Maximum Input Level: +6 dBm (—20 dBm recommended) 18 Vdc
Pin Assignments: Shell = Ground Center = Signal IEC Standard
Voltage for Remote Power: 12 Vdc, 150 mA maximum
ULXP4 Receiver Output
Connector: High Z Audio; Low Z Audio
Output Configuration: High Z Audio Unbalanced (1/4 in.); Low Z Audio Balanced (XLR)
Actual Impedance: High Z Audio 3 k0hms; Low Z Audio 22
Nominal Input Level: High Z Audio Pin Assignments: Tip = Hot Ring/ Sleeve = Gnd: Low Z Audio 1 = Ground 2 = Hot 3 = Cold
Voltage/Current/Phantom: Power Protection?: High Z Audio; Yes Low Z Audio Yes
ULX2 Transmitter Input
Input Configuration: Unbalanced, active
Actual Impedance: 20 kohms
Maximum Input Level: 10 Vp—p (12 dBV) for 1% THD at minimum gain setting using 1 kHz signal.
ULX2 Transmitter Output
Actual Impedance: 50 Ohms
Nominal Output Level: 20 mW
Maximum Output Level: 30 mW
Pin Assignments: Shell = Ground Center = Signal
Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive
voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output
Transmitter Gain Adjustment Range: ULX1: 25 dB
Receiver Audio Output Level (± 38 kHz deviation, 1 kHz tone):
XLR connector (into 600 ohm load): +3.9 dBV (line), —17 dBV (mic)
1/4 inch connector (into 3000 ohm load): —2 dBV
Impedance: ULX2 (input): 1 Megohm; ULXP4 (output): 50 ohms at line level; 2000 ohms at mic level
Modulation: ±38 kHz deviation compressor-expander system with pre- and de-emphasis.
RF Power Output: ULX2: 30 mW maximum
Dynamic Range: >100 dB, A-weighted
RF Sensitivity: 1.26 uV for 12 dB SINAD (typical)
Image Rejection: 80 dB typical
Spurious Rejection: 75 dB typical
Ultimate Quieting (reference ± 38 kHz deviation): >105 dB, A-weighted
System Distortion (reference ± 38 kHz deviation, 1 kHz modulation): 0.3% total harmonic distortion, typical
Power Requirements: ULX2: 9V alkaline battery; 8.4 V Nicad optional; ULXS4: 14 - 18 Vdc (negative ground), 550 mA
Battery Life: 8 to 9 hours (with 9V alkaline battery)
Operating Temperature Range: - 20 degrees to 49 degrees C (- 4 degrees to 120 degrees F)
NOTE: Battery characteristics may limit this range
NOTE: Bodypack and Handheld Transmitters cannot be used simultaneously
ULXP4 Dimensions (H x W x D): 1.72 in. x 8.56 in. x 6.88 in. (43 mm x 214 mm x 172 mm)
ULXP4 Weight: 2 lbs 7 oz. (1105 g)
ULX2/BETA 87 Dimensions (Length x Diameter): 8.8 x 2 in. (223.5 x 51 mm)
ULX2/BETA 87 Weight: 9.1 oz. (258 g) without battery
Beta 87A Vocal Microphone
Type: Dynamic (moving coil)
Frequency Response: 50 to 16,000 Hz
Polar Pattern: Supercardioid, rotationally symmetrical about microphone axis, uniform with frequency.
Output Level (at 1,000 Hz): Open Circuit Voltage -51 dBV/Pa* (2.8 mV)
*1 Pa = 94 dB SPL
Impedance: Rated impedance is 150 ohms (290 ohms actual) for connection to microphone inputs rated low Z.
Phasing: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3.
Connector: Three-pin professional audio connector (male XLR type).
Case: Silver blue enamel-painted die cast metal with hardened, matte-finished steel mesh grille.
Adjustable Stand Adapter: Slip-in, adjustable through 180 degrees, with standard 5/8"-27 thread.
Net Weight: 275 grams (9.6 oz)
Shure ULXP24D/BETA87A Dual Handheld Wireless Microphone System
One year warranty on wireless mics, mixers, and circuitry products.
2 year warranty on wired mics.
Warranty terms vary. Check with manufacturer for specific product warranty.
Get your gear covered!
Now you can get added warranty protection for your new gear. Pro Coverage steps
in where the manufacturer's "normal wear and tear" ends. Our PRO COVERAGE program
offers you UPGRADED COVERAGE if your product ever fails!
Pro Coverage includes:
- Accidental damage protection (new gear only)
- Expedited Repair
- Free Shipping (for returns or repairs)
- 100% Coverage for Commercial Use
- Extended Return Period
- Extended Price Protection
- No Lemon Guarantee
- Free Transfer of Coverage to a new owner
- Repair Costs Covered for up to 3 years from date of purchase
- Repairs Can Be Authorized Toll-Free by Phone or the via the web
