[[KeywordSearchInputContent]]

Free Shipping to store or home

Item # 270808

Print this page

  1. Select the information you'd like to print out.
  2. Cancel
Shure ULXP14 Instrument Wireless System
Use Add to Cart below to have it shipped to you, or to a store near you.
Close
  • Store
  • Availability
Guaranteed Lowest Price
Pickup In Store
GC Shopping Cart
 Cart Contents
Qty Description Price Shipping Subtotal 
      Shure ULXP14 Instrument Wireless System (270808)
Availability:  


Pickup In Store
GC Shopping Cart
 Cart Contents
Qty Description Price Shipping Subtotal 
      Shure ULXP14 Instrument Wireless System (270808)
Availability:  


Professional grade.

The Shure ULXP 14 Instrument Wireless System features a ULXP4 Diversity Receiver, a ULX1 Bodypack Transmitter, and the WA302 cable. Shure ULX Standard UHF systems represent a breakthrough in performance and price for both working musicians and professional sound installers. ULX Professional systems offer more advanced features and controls, including lockable settings and group scan function. Over 1400 selectable, pre-programmed frequencies are available, and Automatic Frequency Selection provides a straight shot to a clear channel.

ULXP4 Wireless Diversity Receiver

The expanded feature set of the ULXP4 wireless receiver, with advanced settings and controls including lockable settings and group scan, offers a direct path to full, clear audio signals. The ULXP4 offers an exceptional value in both performance and price, for both working musicians and sound installers.

ULX1 Wireless Bodypack Transmitter

The low-profile, highly durable body-pack ULX1 has all the characteristics to meet the demands of high performance. For use with headworn, lavalier and instrument microphones, as well as guitars and basses. Attaches to belt, waistband or guitar strap with clip for hands-free mobility.

WA302 Instrument Cable
The WA302 instrument cable connects the ULX1 body-pack transmitter to a guitar or other instrument. Features a 2.5 foot (.75 m), length with 1/4-inch plug and 4-pin mini connector (TA4F).

Shure ULXP14 Instrument Wireless System Features:

  • ULXP4 Wireless Diversity Receiver
    Automatic Frequency Selection with group scan function
    Over 1400 selectable frequencies
    Predictive Diversity
    5-segment transmitted audio signal strength meter
    5-segment RF meter
    3-segment transmitter battery fuel gauge
    Advanced multi-function LCD displays group and channel
    Mic/Line switch
    Remotable 1/2-wave antenna
    Frequency and volume lockout
    XLR and 1/4-inch output
    Rugged metal chassis
    1/2 rack design

    ULX1 Wireless Bodypack Transmitter
    Three-segment battery fuel gauge
    Frequency and power lockout
    Flexible 1/4 wave antenna
    TA4F mini four-pin input connector
    Backlit LCD display shows group and channel setting
    Adustable audio gain control
    Input attenuation switch (selects 0 dB or -20 dB attenuation)
    PEAK icon appears when audio input overloads the transmitter
    Power on/off switch
    8 hour battery life (9V battery)
    300 foot (100m) operating range


Shure ULXP14 Instrument Wireless System Specifications:

  • ULXP4 Wireless Diversity Receiver
    RF Carrier Frequency Range: 554.000 to 865.000 MHz (Available frequencies depend on the applicable regulations in the country where the system is
    used). Refer to the frequency supplement supplied with the system.
    Effective Range: 100 m (300 ft.) under optimal conditions (NOTE: Actual working range depends on RF signal absorption, reflection, and interference)
    Audio Frequency Response: 25 to 15,000 Hz, ± 2dB (NOTE: Overall system frequency response depends on the microphone element.)

    ULXP4 Receiver Input
    Connector: Antenna Power Input
    Connector Type: BNC IEC 320
    Actual Impedance: 50 Ohms
    Nominal Input Level: —95 to —30 dBm 15 VDC
    Maximum Input Level: +6 dBm (—20 dBm recommended) 18 Vdc
    Pin Assignments: Shell = Ground Center = Signal IEC Standard
    Voltage for Remote Power: 12 Vdc, 150 mA maximum

    ULXP4 Receiver Output
    Connector: High Z Audio; Low Z Audio
    Output Configuration: High Z Audio Unbalanced (1/4 in.); Low Z Audio Balanced (XLR)
    Actual Impedance: High Z Audio 3 k0hms; Low Z Audio 22
    Nominal Input Level: High Z Audio Pin Assignments: Tip = Hot Ring/ Sleeve = Gnd: Low Z Audio 1 = Ground 2 = Hot 3 = Cold
    Voltage/Current/Phantom: Power Protection?: High Z Audio; Yes Low Z Audio Yes

    Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive
    voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4-inch output
    Transmitter Gain Adjustment Range: ULX1: 25 dB
    Receiver Audio Output Level (± 38 kHz deviation, 1 kHz tone):
    XLR connector (into 600 ohm load): +3.9 dBV (line), —17 dBV (mic)
    1/4 inch connector (into 3000 ohm load): —2 dBV
    Impedance
    ULX1 (input): 1 Megohm ULXP4 (output): 50 ohms at line level; 2000 ohms at mic level
    Modulation: ±38 kHz deviation compressor-expander system with pre- and de-emphasis.
    RF Power Output: ULX2: 30 mW maximum
    Dynamic Range: >100 dB, A-weighted
    RF Sensitivity: 1.26 uV for 12 dB SINAD (typical)
    Image Rejection: 80 dB typical
    Spurious Rejection: 75 dB typical
    Ultimate Quieting (reference ± 38 kHz deviation): >105 dB, A-weighted
    System Distortion (reference ± 38 kHz deviation, 1 kHz modulation): 0.3% total harmonic distortion, typical
    Power Requirements: ULX2: 9V alkaline battery; 8.4 V Nicad optional; ULXS4: 14 - 18 Vdc (negative ground), 550 mA
    Battery Life: 8 to 9 hours (with 9V alkaline battery)
    Operating Temperature Range: - 20 degrees to 49 degrees C (- 4 degrees to 120 degrees F)
    NOTE: Battery characteristics may limit this range.

    ULXP4 Dimensions (H x W x D): 1.72 in. x 8.56 in. x 6.88 in. (43 mm x 214 mm x 172 mm)
    ULXP4 Weight: 2 lbs 7 oz. (1105 g)

    ULX1 Dimensions (H x W x D): 3.86 x 2.68 x 1.10 in. (96.5 x 67 x 26.7 mm)
    ULX1 Net Weight: 79 g (2.8 oz.) without battery


Shure ULXP14 Instrument Wireless System

One year warranty on wireless mics, mixers, and circuitry products.
2 year warranty on wired mics.
Warranty terms vary. Check with manufacturer for specific product warranty.

Get your gear covered!

Now you can get added warranty protection for your new gear. Pro Coverage steps in where the manufacturer's "normal wear and tear" ends. Our PRO COVERAGE program offers you UPGRADED COVERAGE if your product ever fails!

Pro Coverage includes:

  • Accidental damage protection (new gear only)
  • Expedited Repair
  • Free Shipping (for returns or repairs)
  • 100% Coverage for Commercial Use
  • Extended Return Period
  • Extended Price Protection
  • No Lemon Guarantee
  • Free Transfer of Coverage to a new owner
  • Repair Costs Covered for up to 3 years from date of purchase
  • Repairs Can Be Authorized Toll-Free by Phone or the via the web
Voice your opinion! Be the first to review »
Questions about the ULXP14 Instrument Wireless System (270808)


To: GuitarCenter.com
PO Box 4769
Westlake Village, CA 91359
USA
866-498-7882
 
Order #: (if applicable)  * Denotes Required Field
*First Name:
*Last Name:
*Email:
Phone:
*Subject:
*Message:
Click to add file attachment
File Upload 5mb limit