CONSUMER ALERT
Most users do not need a license to operate this wireless microphone system. Nevertheless,
operating this microphone system without a license is subject to certain restrictions:
the system may not cause harmful interference; it must operate at a low power level
(not in excess of 50 milliwatts); and it has no protection from interference received
from any other device. Purchasers should also be aware that the FCC is currently
evaluating use of wireless microphone systems, and these rules are subject to change.
For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit
the FCC’s wireless microphone website at
http://www.fcc.gov/cgb/wirelessmicrophones.
A versatile wireless solution for brass or percussion instruments.
This SLX Instrument Wireless System includes an SLX4 Diversity Receiver, a Shure WB98H/C Clip-On Cardioid Condenser Instrument Microphone, and a Shure SLX1 Bodypack Transmitter.
Shure SLX4 Wireless Receiver
The SLX4 wireless receiver is a breeze to use with Automatic Frequency Selection and Automatic Transmitter Setup. With included rack hardware and detachable antennas, it is ready for immediate installation right out of the box.
Shure WB98H/C Clip-On Cardioid Condenser Instrument Microphone
The Shure WB98H/C (the wireless version of the Beta 98H/C) is a premium cardioid condenser instrumental microphone that clamps onto the bell of wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the microphone to be easily positioned and secured in place, and an isolation shock-mount reduces the transmission of instrument 'key noise' and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances.
Shure SLX1 Bodypack Transmitter
The SLX1 bodypack transmitter is designed to hold up to the most adverse conditions. Whether used with headworn, Lavalier, instrument microphones, or with guitars or basses, the Shure SLX1 is the definition of reliability. SLX Wireless Systems feature Shure's patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.
With our
Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!
Shure SLX14/BETA98H Instrument Wireless System Features:
- SLX4 Wireless Receiver:
Automatic Frequency Selection
Automatic Transmitter Setup
960 Selectable frequencies across 24MHz bandwidth
Detachable 1/4 wave antennas
Microprocessor-controlled diversity
RF presence LED
5-segment audio meter
Multi-function, backlit LCD
Low battery indicator
Frequency and power lockout
Rugged metal chassis
Volume control on rear of unit
1/2 rack design
Furnished rack hardware
Non-slip bumpers for use out of rack
XLR and 1/4" outputs
WB98H/C Clip-On Cardioid Condenser Instrument Microphone
Transformerless preamplifier circuitry, which improves linearity across the full frequency range
High gain-before-feedback
Excellent rejection of unwanted noise
High maximum sound pressure level (SPL) enables it to handle the extreme demands of brass, woodwind and percussion instruments
Tailored frequency response for studio quality performance
Wide dynamic range for use in high SPL environments
Uniform supercardioid pattern for high gain before feedback and superior rejection of off-axis sound
Compact design reduces stage clutter
Detachable cable for easy storage
Legendary Shure quality, ruggedness, and reliability
SLX1 Bodypack Transmitter
Automatic Transmitter Setup
Backlit LCD with timeout feature
Frequency and power lockout
3-segment battery fuel gauge
2 AA batteries (included) provide 8 hours of continuous use
518 - 782 MHz operating range
Shure SLX14/BETA98H Instrument Wireless System Specifications:
- SLX4 Wireless Receiver:
Audio Output Level (ref. ± 38kHz deviation with 1kHz tone): XLR connector (into 600 Ohm load): —13dBV; 1/4" connector (into 3000 Ohm load): —2dBV
Output Impedance: XLR connector: 200 Ohms; 1/4" connector: 1kohms
XLR output: Impedance balanced; Pin 1: Ground; Pin 2: (+); Pin 3: (-)
Sensitivity: —105 dBm for 12 dB SINAD, typical
Image Rejection: >70 dB, typical
Power Requirements: 12—18 Vdc at 150 mA, supplied by external power supply
Operating Range Under Typical Conditions: 300 ft. (100m)
Note: Actual range depends on RF signal absorption, reflection, and interference
Audio Frequency Response (+/— 2 dB): Minimum: 45 Hz: Maximum: 15 kHz
Note: Overall system frequency depends on microphone element.
Total Harmonic Distortion (ref. +/— 38 kHz deviation, 1 kHz tone): 0.5%, typical
Dynamic Range: >100 dB A-weighted
Operating Temperature Range: —18 degree C (0 degree F) to +50 degree C (+122 degree F)
Note: battery characteristics may limit this range
Dimensions (H x W x D): 1.65 x 7.76 x 5.28", (42 x 197 x 134mm)
Weight: 1lb. 13oz. (816g )
Housing: Galvanized steel
Transmitter Audio Polarity: Positive pressure on microphone diaphragm (or positive voltage applied to tip of WA302 phone plug) produces positive voltage on pin 2 (with respect to pin 3 of low impedance output) and the tip of the high impedance 1/4" output
Logic Connections: Pin 1: Logic output, Transmitter Mute Status. Mute=low (0 V). Sinks up to 100 mA. Absolute maximum -0.7 to 5.5V DC; Pin 2: Logic ground; Pin 3: Logic output, Battery Status. Good=low (0 V). Sinks up to 100 mA; Absolute maximum -0.7 to 5.5V DC
WB98H/C Clip-On Cardioid Condenser Instrument Microphone
Type: Condenser (electret bias)
Frequency Response: 20 to 20,000 Hz
Polar Pattern: Supercardioid (as supplied), uniform with frequency, symmetrical about axis (Cartridge for cardioid polar pattern also available—sold separately)
Output Level (at 1,000 Hz): Open Circuit Voltage: -59 dBV/Pa* (1 mV) typical, *1 Pa = 94 dB SPL
Maximum SPL: (20 Hz to 20 kHz, less than 1% THD): 2.5 kilohm load: 160 dB, 1 kilohm load: 156 dB
Preamplifier Output Clipping Level: (20 Hz to 20 kHz, less than 1% THD): 2.5 kilohm load: + 6 dBV (2.0 V), 1 kilohm load: + 2 dBV (1.26 V)
Dynamic Range: (at 20 Hz to 20 kHz, less than 1% THD, 2.5 kilohm load): 125dB (max SPL minus A-weighted noise)
Output Noise: 35dB SPL, A-weighted
Signal-to-Noise Ratio: 59dB re 94dB SPL
Output Impedance: Rated at 150 ohms (actual)
Recommended minimum load impedance: 1 kilohm
Hum Pickup: -7.5dB equivalent SPL in 1 mOe field (60Hz)
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Phantom Power: 48 Vdc +/- 4 Vdc(IEC-268-15/DIN 45 596), positive pins 2 and 3
Case: Microphone: Matte black enamel brass case and stainless steel inner grille, Preamplifier: Matte black enamel finished steel
Dimensions: Microphone: 11.7mm x 35.6mm (0.46" X 1.40"), Preamplifier: 20mm x 99mm (0.79" X 3.89")
Net Weight: Microphone: 12g (0.4oz) less cable, Preamplifier: 96g (3.4oz)
SLX1 Bodypack Transmitter
Audio Input Level: -10 dBV maximum at mic gain position, +10 dBV maximum at 0 dB gain position, +20 dBV maximum at -10 dB gain position
Gain Adjustment Range: 30dB
Input Impedance: 1 Mohms
RF Transmitter Output: 30 mW maximum (dependent on applicable country regulations
Dimensions (H x W x D): 4.25 x 2.50 x 0.75 in. (108 x 64 x 19 mmD)
Weight: 81 grams (3 oz.) without batteries
Housing: Molded ABS case
Power Requirements: 2 "AA" size alkaline or rechargeable batteries
Battery Life: >8 hours (alkaline)
Shure SLX14/BETA98H Instrument Wireless System
One year warranty on wireless mics, mixers, and circuitry products.
2 year warranty on wired mics.
Warranty terms vary. Check with manufacturer for specific product warranty.
Get your gear covered!
Now you can get added warranty protection for your new gear. Pro Coverage steps
in where the manufacturer's "normal wear and tear" ends. Our PRO COVERAGE program
offers you UPGRADED COVERAGE if your product ever fails!
Pro Coverage includes:
- Accidental damage protection (new gear only)
- Expedited Repair
- Free Shipping (for returns or repairs)
- 100% Coverage for Commercial Use
- Extended Return Period
- Extended Price Protection
- No Lemon Guarantee
- Free Transfer of Coverage to a new owner
- Repair Costs Covered for up to 3 years from date of purchase
- Repairs Can Be Authorized Toll-Free by Phone or the via the web
(Based on 
Based on 
