Shure

collapse expand iconDescription

This PGXD24/SM86 Digital Wireless System from Shure adds the clarity of 24-bit digital audio to the legacy of trusted Shure microphone options for wireless performance.
The Shure SM86 is a unidirectional (cardioid) condenser vocal microphone for professional use in live performance. An extremely rugged microphone, the SM86 withstands the rigors of touring while delivering a clear, studio-quality sound.

A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The built-in three-point shock mount minimizes handling noise, and a two-stage pop filter reduces wind and breath "pop" noise.

Besides the SM86 microphone, you also get a PGXD2 handheld transmitter, PGXD4 receiver, padded carrying case, and a microphone clip.

The PGXD2 transmitter features automatic setup, a multi-function LED Indicator (power, lockout, mute, low battery), and provides you with 8 hours of continuous use on 2 AA batteries. It gives you and your microphone a generous 200' (60m) operating range without losing audio quality.

The PGXD4 receiver offers 24-bit/48kHz accurate sound, offers technology for incredibly accurate sound, auto frequency selection, and greater reliability thanks to its true digital diversity.
Shure PGXD24/SM86 Digital Wireless System with SM86 Mic

collapse expand iconFeatures

PGXD4 Wireless Receiver
  • 24-bit / 48kHz digital technology for incredibly accurate sound
  • Automatic frequency selection locates a clear channel instantly
  • One-touch sync automatically syncs the transmitter and receiver
  • True digital diversity delivers rock-solid wireless signal reliability
  • Up to 5 systems can be used at once
  • 1„4" and XLR audio outputs
  • Included padded carrying case for portability and protection
PGXD2 Handheld Transmitter
  • Power, mute, and battery status LED
  • Up to 9 hours of continuous use from 2 AA batteries
  • 200" (60m) operating range
  • 10dB of adjustable gain
  • Lockable interface prevents accidental setting changes
  • Rugged construction for reliable performance show after show
SM86 microphone
  • Condenser cartridge for studio quality sound
  • Tailored frequency response for a clear reproduction of vocals
  • Rugged construction withstands the rigors of touring sound
  • Cardioid polar pattern minimizes unwanted background noise
  • Excellent choice for stage monitors and personal monitors
  • Built-in three-point shock mount minimizes handling noise
  • Two-stage "pop" filter reduces wind and breath noise
warning

WARNING: Cancer and Reproductive Harm www.P65Warnings.ca.gov.

collapse expand iconSpecs

PGXD4 receiver
  • Dimensions (HxWxD): 40mm x 181mm x 104mm (1.6" x 7.125" x 4.1")
  • Weight: 289g (10.2oz.)
  • Housing: ABS
  • Audio Output Level (ref. ±38kHz deviation, 1kHz tone): XLR connector (into 3000Î load): -2.5dBV 1/4" connector (into 10000Î load): +10 dBV
  • Impedance:
  • XLR: 50Î
  • 1/4": 50Î
  • Sensitivity: -102 dBm @ 10-5 BER
  • Image rejection: > 70dB, typical
  • XLR output:
  • Impedance balanced Pin 1: Ground (cable shield)
  • Pin 2: Audio
  • Pin 3: No Audio
  • Audio LED:
  • Red: 2dB below clip
  • Amber: 12dB below clip
  • Green: 50dB below clip
  • Power Requirements: 12-18 Vdc at 150 mA, supplied by external power supply
  • Pin Assignments: XLR: 1 = ground, 2 = hot, 3 = cold 6.35mm (1/4") TRS: Tip = audio, Ring = no audio, Sleeve = ground
PGX2 Handheld Transmitter
  • Audio Input Level:
  • +2 dBV maximum at -10dB position
  • -8 dBV maximum at 0dB position
  • Gain Adjustment Range: 10dB
  • RF Transmitter Output: 30 mW maximum (dependent on applicable country regulations)
  • Dimensions including SM58 cartridge: 254mm x 51mm dia. (10" x 2")
  • Weight: 290g (10.2oz.) without batteries
  • Housing: Molded PC/ABS handle and battery cup
  • Power Requirements: 2 AA size alkaline or rechargeable batteries
  • Battery Life: > 8 hours (alkaline)
PG58 microphone
  • Microphone Type: Dynamic (moving coil)
  • Polar Pattern: Cardioid (unidirectional)
  • Frequency response: 60 to 15,000Hz
  • Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of microphone output connector
  • Output Impedance (at 1000Hz): 300Î
  • Sensitivity (at 1000Hz): -53dBV/Pa, (2.2 mV), 1 Pascal=94dB SPL
  • Electromagnetic Hum Sensitivity: 26dB equivalent SPL in a 1 millioersted field (60Hz)
  • Switch: Built-in On/Off switch
  • Connector: Three pin professional audio connector (male XLR type)
  • Case: Die cast metal handle, black matte finish; hardened silver colored, spherical steel mesh grille
  • Environmental Conditions: This microphone operates over a temperature range of -29 to 57 Celsius (-20 to 135 Fahrenheit), and at a relative humidity of 0 to 95%.
  • Weight: Net: 321g (11.3 oz) Packaged: 908g (2lb.)

collapse expand iconWarranty

One year warranty on wireless mics, mixers, and circuitry products.
2 year warranty on wired mics.
Warranty terms vary. Check with manufacturer for specific product warranty.

Featured Articles