CONSUMER ALERT
Most users do not need a license to operate this wireless microphone system. Nevertheless,
operating this microphone system without a license is subject to certain restrictions:
the system may not cause harmful interference; it must operate at a low power level
(not in excess of 50 milliwatts); and it has no protection from interference received
from any other device. Purchasers should also be aware that the FCC is currently
evaluating use of wireless microphone systems, and these rules are subject to change.
For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit
the FCC’s wireless microphone website at
http://www.fcc.gov/cgb/wirelessmicrophones.
Takes one of Shure's most popular condenser vocal mics and turns it into a wireless mic with a 200' operating range.
The PGXD2/SM86 Handheld Transmitter with SM86 Mic is designed to meet the needs of the traveling performer by pairing an industry-standard handheld condenser vocal microphone with an exceptional transmitter for use with Shure's PGXD Wireless System.
The PGXD2 transmitter features automatic setup, a multi-function LED Indicator (power, lockout, mute, low battery), and provides you with 8 hours of continuous use on 2 AA batteries. It gives you and your microphone a generous 200' (60m) operating range without losing audio quality.
The Shure SM86 is a unidirectional (cardioid) condenser vocal microphone for professional use in live performance. An extremely rugged microphone, the SM86 withstands the rigors of touring while delivering a clear, studio-quality sound.
A cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The built-in three-point shock mount minimizes handling noise, and a two-stage pop filter reduces wind and breath "pop" noise.
Besides the SM86 microphone and PGXD2 handheld transmitter you also get a padded carrying case and a microphone clip.
With our
Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!
Shure PGXD2/SM86 Handheld Transmitter with SM86 Mic Features:
- PGXD2 Handheld Transmitter PGXD2 Handheld Transmitter Power, mute, and battery status LED
Up to 9 hours of continuous use from 2 AA batteries
200" (60m) operating range
10dB of adjustable gain
Lockable interface prevents accidental setting changes
Rugged construction for reliable performance show after show
SM86 microphone
Condenser cartridge for studio quality sound
Tailored frequency response for a clear reproduction of vocals
Rugged construction withstands the rigors of touring sound
Cardioid polar pattern minimizes unwanted background noise
Excellent choice for stage monitors and personal monitors
Built-in three-point shock mount minimizes handling noise
Two-stage "pop" filter reduces wind and breath noise
Shure PGXD2/SM86 Handheld Transmitter with SM86 Mic Specifications:
- PGX2 Handheld Transmitter
Audio Input Level:
+2 dBV maximum at –10dB position
–8 dBV maximum at 0dB position
Gain Adjustment Range: 10dB
RF Transmitter Output: 30 mW maximum (dependent on applicable country regulations)
Dimensions including SM58 cartridge: 254mm x 51mm dia. (10" x 2")
Weight: 290g (10.2oz.) without batteries
Housing: Molded PC/ABS handle and battery cup
Power Requirements: 2 AA size alkaline or rechargeable batteries
Battery Life: > 8 hours (alkaline)
SM86 microphone
Transducer Type: Condenser (electret bias)
Frequency Response: 50 to 18,000Hz
Polar Pattern: Cardioid
Output Impedance: 150O at 1 kHz
Recommended minimum load impedance: 600O
Sensitivity (at 1,000Hz):
Open Circuit Voltage: -50 dBV/Pa (3.15 mV)
(1 Pa = 94 dB SPL)
Output Clipping Level: 1000O Load at 1,000Hz: +3 dBV (1.41V)
Maximum SPL (at 1,000Hz): 1000 O load (1% THD): 147 dB
Self-Noise: 23dB typical, A-weighted
Dynamic Range (1000 O): 124dB (maximum SPL to A-weighted noise level
Signal-to-Noise Ratio: 71dB at 94dB SPL (IEC 651)*
*S/N ratio is difference between 94 dB SPL and equivalent SPL of self-noise A-weighted.
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of the output connector
Power: Phantom Supply Requirement: 11 to 52 Vdc, positive at both pins 2 and 3
Current Drain: 5.2 mA
Connector: Three-pin (XLR) professional audio
Case: Dark gray enamel-painted steel with matte-finished silver colored steel grille
Net Weight: 278g (9.8oz)
Environmental Conditions
Operating: -18° to 60° C (0° to 135° F) (relative humidity >90%)
Storage: -29° to 74° C (-20° to 165° F) (relative humidity >80%)
Shure PGXD2/SM86 Handheld Transmitter with SM86 Mic
One year warranty on wireless mics, mixers, and circuitry products.
2 year warranty on wired mics.
Warranty terms vary. Check with manufacturer for specific product warranty.
Get your gear covered!
Now you can get added warranty protection for your new gear. Pro Coverage steps
in where the manufacturer's "normal wear and tear" ends. Our PRO COVERAGE program
offers you UPGRADED COVERAGE if your product ever fails!
Pro Coverage includes:
- Accidental damage protection (new gear only)
- Expedited Repair
- Free Shipping (for returns or repairs)
- 100% Coverage for Commercial Use
- Extended Return Period
- Extended Price Protection
- No Lemon Guarantee
- Free Transfer of Coverage to a new owner
- Repair Costs Covered for up to 3 years from date of purchase
- Repairs Can Be Authorized Toll-Free by Phone or the via the web
