The Shure MX395AL Microflex Low Profile Omnidirectional Boundary microphone is an ideal table microphone when minimal presence is of high priority. It is perfect for boardrooms, meeting rooms, and other sites where aesthetics are important. The MX395AL mic is only 1 in. (2.5 cm) in diameter, and extends just 2 cm above the mounting surface when installed, yet it delivers clear, high quality sound.
Shure MX395AL Microflex Low Profile Boundary Microphone Omni
Item # 270946 | Condition: Info
Protect Your Gear
Accidental damage, normalNormal wear and power surges are no longer an issue with these comprehensive and affordable plans. We even pay to ship your gear for repairs. More details.
Covers much more than the original manufacturer's warranty:
Limit of Liability: The least of the cost of (1) authorized repairs, (2) replacement with a product of similar features, (3) reimbursement for authorized repairs or replacement or (4) the price that you paid for the product.
*Limitations and exclusions apply. See terms and conditions for program details
Shure MX395AL Microflex Low Profile Boundary Microphone Features:
- Only 1.25 inch (3.8 cm) in diameter
Omnidirectional polar pattern
Wide dynamic range and smooth frequency response
Logic input for remote LED control
Radio Frequency filtering CommShield Technology
Includes rubber isolation rings and fastening hex nut
Shure MX395AL Microflex Low Profile Boundary Microphone Specifications:
- Type: Condenser (electret bias)
Frequency Response: 50—17000 Hz
Polar Pattern: Omnidirectional
Output Impedance: EIA Rated at 150 Ohms (170 Ohms actual)
Output Configuration: Active balanced
Sensitivity (at 1 kHz , open circuit voltage): —28 dBV/Pa (42 mV) 1 Pascal=94 dB SPL: Maximum Sound Pressure Level (1 kHz at 1% THD, 1 kOhms load): 114 dB
Equivalent output Noise (A-weighted): 21 dB SPL
Signal-to-Noise Ratio (referenced at 94 dB SPL at 1 kHz): 75 dB
Dynamic Range (1 kOhms load at 1 kHz): 93 dB
Common Mode Rejection (10 Hz—100 kHz): 45 dB minimum
Preamplifier output Clipping level (1% THD): —8 dBV (0.4 V)
Polarity: 3-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector.
Weight Net: 0.30 lbs. (0.136 kg)
Logic Connections: LED IN: Active low (=1.0V), TTL compatible. Absolute maximum voltage:-0.7V to 50V.
Environmental Conditions: Operating Temperature: -18—57 C (0—135 degrees F); Storage Temperature: -29—74 degrees C (-20—165 degrees F); Relative Humidity: 0—95%
Power Requirements : 11—52 Vdc phantom, 2.0 mA
Shure MX395AL Microflex Low Profile Boundary Microphone
One year warranty on wireless mics, mixers, and circuitry products.
2 year warranty on wired mics.
Warranty terms vary. Check with manufacturer for specific product warranty.
Get your gear covered!
Now you can get added warranty protection for your new gear. Pro Coverage steps in where the manufacturer's "normal wear and tear" ends. Our PRO COVERAGE program offers you UPGRADED COVERAGE if your product ever fails!
Pro Coverage includes:
- Accidental damage protection (new gear only)
- Expedited Repair
- Free Shipping (for returns or repairs)
- 100% Coverage for Commercial Use
- Extended Return Period
- Extended Price Protection
- No Lemon Guarantee
- Free Transfer of Coverage to a new owner
- Repair Costs Covered for up to 3 years from date of purchase
- Repairs Can Be Authorized Toll-Free by Phone or the via the web
- Product DetailsCustomer reviewsPrice