Accidental damage, normalNormal wear and power surges are no longer an issue with these comprehensive and affordable plans. We even pay to ship your gear for repairs. More details.
Covers much more than the original manufacturer's warranty:
Damage due to unexpected and unintentional spills, drops and impacts
Damage due to normal wear and tear
Damage caused by lightning/power surge
Damage due to dust, internal heat, humidity, heavy usage
No Lemon Policy on merchandise over $200- if it fails for the same reason 3 times, it is replaced on the 4th breakdown
Complete refund in the event of failure or substandard performance on merchandise under $200 (Gift Certificate sent for the full price plus applicable sales tax paid)
Manufacturer's Specs Coverage -- The product does not need to fail to be covered. If the product does not perform as it did the first day you bought it, we will repair or replace it so that it does
Free shipping to and from repair facility
Plans are transferable in the event merchandise is sold
Limit of Liability: The least of the cost of (1) authorized repairs, (2) replacement with a product of similar features, (3) reimbursement for authorized repairs or replacement or (4) the price that you paid for the product.
*Limitations and exclusions apply. See terms and conditions for program details
This Shure Microflex MX392 is a small, low-profile surface-mounted electret condenser boundary microphone designed for mounting on conference tables, stage floors, and lecterns. The MX392/S supercardioid mic features high sensitivity and a wide frequency range make them especially suitable for picking up speech and vocals in sound reinforcement and recording applications. The MX392/S has an supercardioid pickup pattern and is recommended for sound reinforcement applications requiring narrow or more distant coverage.
Microflex Boundary microphones are the high-quality solution for a range of applications, such as altars, boardrooms and distance learning centers. Every Microflex plate microphone features a choice of interchangeable condenser cartridges. Microflex cartridges give you superior Shure quality sound for every application.
In addition, the mic's programmable switches offer the flexibility to be set for Push to Talk, Push to Mute or Push On/Push Off modes. Attractively designed with a low profile, professional appearance, the Microflex Boundary microphones come with an easy to use paint mask for your custom-color installations. The Shure MX392/S surface-mount microphone includes a programmable membrane on/off switch, logic input/output terminals, an on/off indicator LED, screw terminal connections, and an attached 12 ft. (3.7 m) unterminated cable.
Flat frequency response across the vocal range for uncolored sound Interchangeable cardioid, supercardioid, and omnidirectional cartridges that provide optimal choice for each application Sleek, low-profile design for unobtrusive appearance Balanced, transformerless output for increased immunity to noise over long cable runs Programmable on/off switch and LED on/off indicator Logic input/output terminals for remote control or use with automatic mixers Advanced RF filtering
Frequency Response: 50 to 17,000 Hz Polar Pattern: Supercardioid Pickup angle (-3 dB): 115 degrees Output Impedance: EIA Rated at 150 ohms (180 ohms actual) Sensitivity (1 kHz ref. 1 V per Pascal ): -26.5 dBV/Pa (47.3 mV) Maximum Sound Pressure Level (1 kHz at 1% Total Harmonic Distortion, 1 kOhm load): 116 dB Signal to Noise Ratio (referenced at 94 dB SPL): 72.0 dB Equivalent Output Noise (A-weighted): 22.0 dB SPL Dynamic Range at 1 kOhm Load: 94 dB Common Mode Rejection: 50 dB minimum Preamplifier Output Clipping Level: -6 dBV (0.5 V) Polarity: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin output connector. Logic Connections: LED IN: Active low (<1.0v), TTL compatible. Absolute maximum voltage: -0.7V to 50V.; SWITCH OUT: Active low (<0.5V), sinks up to 20mA, TTL compatible. Absolute maximum voltage: -0.7V to 24V (up to 50V through 3 k ohms). Power Requirements: 11 to 52 Vdc phantom, 2.0 mA current consumption 3 of the preamplifier XLR output connector. Environmental Requirements: Operating Temperature Range: —18 degrees C to 57 degrees C (0 degree F to 135 degrees F); Relative Humidity: 0 to 95% Dimensions: (L x W x H): 3.1" x 2.08" x .750", (7.940 x 5.304 x 1.905 cm) Furnished Accessories: Zippered bag, In-line Preamp, #4 hex wrench
All measurements taken with microphone mounted on a wooden surface 30 in. x 30 in. (76.2 cm x 76.2 cm)
One year warranty on wireless mics, mixers, and circuitry products.
2 year warranty on wired mics.
Warranty terms vary. Check with manufacturer for specific product warranty.
Get your gear covered!
Now you can get added warranty protection for your new gear. Pro Coverage steps
in where the manufacturer's "normal wear and tear" ends. Our PRO COVERAGE program
offers you UPGRADED COVERAGE if your product ever fails!
Pro Coverage includes:
Accidental damage protection (new gear only)
Expedited Repair
Free Shipping (for returns or repairs)
100% Coverage for Commercial Use
Extended Return Period
Extended Price Protection
No Lemon Guarantee
Free Transfer of Coverage to a new owner
Repair Costs Covered for up to 3 years from date of purchase
Repairs Can Be Authorized Toll-Free by Phone or the via the web
You must be logged in to write a review. Please click here to login.
Browse similar items:
Product Details
Customer reviews
Price
You are currently viewing the Printable Version of this page. Click here to return
to the Regular Version.
866-498-7882
Available in Stores
For your convenience, our online inventory has been expanded to include items in
our retail locations. Some items may be fulfilled from Guitar Center retail stores*.
Items will be inspected to ensure the store has the product you want, in the condition
you expect. If not, a store manager will contact you by phone or email within one
hour.
*Select items are available for in store pick-up only
