Convenient clip-on design makes it perfect for miking horns and other instruments.

View all items from this brand

The Shure Beta 98H/C is a premium cardioid condenser instrumental mic that clamps onto the bell of wind instruments or onto the rim of percussion instruments. The Shure Beta 98H/C Microphone features an integrated gooseneck with angle brace, ratcheting swivel joint, and an isolation shockmount.

Shure Beta 98H/C Clip-On Condenser Microphone Features:

m (10 ft.) high-flex cable with attached preamplifier (XLR connection)
Tailored frequency response for open, natural sound reproduction
Compact, lightweight construction provides a low degree of visibility
Interchangeable microphone cartridges are available:
RPM108 - Cardioid cartridge
RPM110 - Supercardioid cartridge

Shure Beta 98H/C Clip-On Condenser Microphone Specifications:

Type: Condenser (electret bias)
Frequency response: 20 to 20,000Hz
Polar pattern: Unidirectional (cardioid)
Output impedance: Rated at 150O (actual)
Recommended minimum load impedance: 1 kO (May be used with loads as low as 150O with reduced clipping level
Output Level (0 dB = 1 volt per Pascal):
Open Circuit Voltage: -56dB (1.6mV)
Output Clipping Level (at 1kHz, THD < 1%):
2.5kO load: 11dBV (3.5V)
1.0kO load: 3dBV (1.4 V)
Maximum SPL:
2.5kO: 163dB
1.0kO load: 155dB
Dynamic Range (maximum SPL to A-weighted noise level): 132dB (2.5kO load)
Signal-to-noise ratio: 63dB at 94dB SPL (IEC 651)
Polarity:
Positive pressure on microphone diaphragm produces positive voltage on pin 2 relative to pin 3 of preamplifier output connector
Recommended Operating Voltage: 11 to 52 Vdc Phantom
Environmental conditions: Operating temperatures: -7° C to 49° C (20° F to 120° F)
Storage temperatures: 29° C to +74° C (-20° F to 165° F)
Relative Humidity: 0 to 95%
Net Weight: Microphone w/cable and preamplifier: 156g (5.5oz.)

Shure Beta 98H/C Clip-On Condenser Microphone

One year warranty on wireless mics, mixers, and circuitry products.
2 year warranty on wired mics.
Warranty terms vary. Check with manufacturer for specific product warranty.

Get your gear covered!

Now you can get added warranty protection for your new gear. Pro Coverage steps in where the manufacturer's "normal wear and tear" ends. Our PRO COVERAGE program offers you UPGRADED COVERAGE if your product ever fails!

Pro Coverage includes:

• Accidental damage protection (new gear only)
• Expedited Repair
• Free Shipping (for returns or repairs)
• 100% Coverage for Commercial Use
• Extended Return Period
• Extended Price Protection
• No Lemon Guarantee
• Free Transfer of Coverage to a new owner
• Repair Costs Covered for up to 3 years from date of purchase
• Repairs Can Be Authorized Toll-Free by Phone or the via the web