A large diaphragm supercardioid condenser mic that greatly minimizes bleed from off-axis sound sources.
The Shure Beta 27 side-address condenser microphone is precision engineered for professional sound reinforcement and project studio recording applications. The Beta 27 mic's flat frequency response and low self-noise provide unerring performance in demanding environments whether they are on stage or in a studio.
The Shure Beta 27 microphone's tight supercardioid pattern and 3-position switchable low-frequency filter help reduce unwanted background noise, counteract proximity effect for consistent, extended low-end, and give you high gain-before-feedback. Shure tailored the Beta 27 for superior transient response thanks to the microphone's low-mass, 1" externally-biased, ultra-thin, 24-Karat gold-layered Mylar diaphragm.
With our
Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!
Shure Beta 27 Side-Address Microphone Features:
- Supercardioid polar pattern specifically targets the sound source consistently with greatly minimized bleed from off-axis sound sources
Tailored for superior transient response from a low-mass, 1" externally-biased, ultra-thin 24 Karat gold-layered Mylar diaphragm
Flat, neutral frequency response for natural reproduction on stage or in the studio
3-position switchable low-frequency filter helps reduce unwanted background noise or counteract proximity effect for consistent, extended low-end
-15dB switchable attenuator handles extremely high SPLs with ease
Premium electronic components and gold-plated internal and external connectors
Internal pop filter with three separate mesh layers reduces wind and breath noise
Shure Beta 27 Side-Address Microphone Specifications:
- Type: Condenser (externally biased)
Frequency: Response: 20 to 20,000Hz
Polar Pattern: Supercardioid
Impedance: 160O
Sensitivity (at 1kHz, open circuit voltage): -37dBV/Pa, 1 Pascal=94dB SPL
Maximum SPL (1kHz at 1% THD): 1000O load: 134dB (148dB, Pad on), 2500O load: 140dB (154dB, Pad on)
Signal-to-Noise ratio (referenced at 94dB SPL at 1kHz): 85.5dB, S/N ratio is difference between 94dB SPL and equivalent SPL of self noise, A-weighted
Dynamic range (at 1kHz): 1000O load: 125.5dB, 2500O load: 131.5dB
Common Mode Rejection (20 Hz to 20kHz): > 50dB
Clipping Level (20Hz-20kHz at 1% THD): 1000O load: 2.0dBV, 2500O load: 8.5dBV, THD of microphone preamplifier when applied input signal is equivalent to cartridge output at specified SPL
Self-Noise (typical, equivalent SPL, A-weighted): 8.5dB
Polarity: Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3
Switch Attenuator: -15dB
Low Frequency Response: flat; -6dB/octave below 115 Hz; -18dB/octave below 80Hz
Connector: Three-pin professional audio (XLR), male
Power Requirements: 48 Vdc phantom, 5.6 mA
Weight: 428g (15.1oz.)
Shure Beta 27 Side-Address Microphone
One year warranty on wireless mics, mixers, and circuitry products.
2 year warranty on wired mics.
Warranty terms vary. Check with manufacturer for specific product warranty.
Get your gear covered!
Now you can get added warranty protection for your new gear. Pro Coverage steps
in where the manufacturer's "normal wear and tear" ends. Our PRO COVERAGE program
offers you UPGRADED COVERAGE if your product ever fails!
Pro Coverage includes:
- Accidental damage protection (new gear only)
- Expedited Repair
- Free Shipping (for returns or repairs)
- 100% Coverage for Commercial Use
- Extended Return Period
- Extended Price Protection
- No Lemon Guarantee
- Free Transfer of Coverage to a new owner
- Repair Costs Covered for up to 3 years from date of purchase
- Repairs Can Be Authorized Toll-Free by Phone or the via the web
