Optimized for clear speech.
The Shure Model 515BSM is a low-impedance, dynamic microphone designed for hand-held or fixed use. The 515BSM microphone features a unidirectional (cardioid) pickup pattern that provides excellent reproduction of voice and effective rejection of feedback. The 515BSM is supplied with a push-to-talk switch and a four-conductor, retractable cable (2 shielded conductor).
The 515BSM microphone is especially suitable for use in paging systems, public speaking, stage performance, and public address systems. It is also highly recommended for other applications requiring both hand-held and fixed installation operations and is wired with the microphone circuit normally open for use in parallel microphone installations.
With our
Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!
Shure 515BSM Handheld Push-To-Talk Microphone Features:
- Frequency response optimized for announcing, narration, and paging applications
Cardioid pickup pattern: symmetrical about axis
Neodymium magnet for high signal-to-noise ratio
Shock-mounted cartridge for quiet operation and low stand/handling noise
Tough diecast, locking grille and handle resist wear from constant use and handling
Built-in push-to-talk switch controls both microphone circuit and relay or control circuit
Includes hex wrench, swivel adaptor, and mounting flange
Shure 515BSM Handheld Push-To-Talk Microphone Specifications:
- Type: Dynamic (moving coil)
Frequency Response: 80 to 15,000 Hz
Polar Pattern: Cardioid (unidirectional). Effective rejection of sound
at rear of microphone is uniform at all frequencies, while front pickup characteristics are uniform about axis
Impedance 150 Ohms rated (180 Ohms actual)
Output Level (at 1,000 Hz): Open Circuit Voltage*: —57.0 dBV/Pa* (0.14 mV)
*1 Pa=94 dB SPL
Switch: Built-in, leaf-type, non-locking, push-to-talk
Shock Mount: Internal rubber vibration isolator
Cable: Highly durable, retractable cable with effective hum shielding, four conductors (two shielded), neoprene jacketed with 5-pin connector
Cable Length: 13 in. (330 mm) retracted; 6 ft (1.83 m) extended
Case: Silver finish die casting with black enamel diecast grille
and stainless steel screen
Dimensions (Length x diameter): 6.5" x 1.5" (16.5 x 3.75 cm)
Net weight: 13.5 oz. (380 g)
Shure 515BSM Handheld Push-To-Talk Microphone
One year warranty on wireless mics, mixers, and circuitry products.
2 year warranty on wired mics.
Warranty terms vary. Check with manufacturer for specific product warranty.
Get your gear covered!
Now you can get added warranty protection for your new gear. Pro Coverage steps
in where the manufacturer's "normal wear and tear" ends. Our PRO COVERAGE program
offers you UPGRADED COVERAGE if your product ever fails!
Pro Coverage includes:
- Accidental damage protection (new gear only)
- Expedited Repair
- Free Shipping (for returns or repairs)
- 100% Coverage for Commercial Use
- Extended Return Period
- Extended Price Protection
- No Lemon Guarantee
- Free Transfer of Coverage to a new owner
- Repair Costs Covered for up to 3 years from date of purchase
- Repairs Can Be Authorized Toll-Free by Phone or the via the web
