Skip to main content

SWR Mini Mo' Analog Multi-Effects Bass Preamp with Mo' Control 2 Footswitch

Item #: 
127474181299969794
  • Write a Review

The SWR Mini Mo' Analog Multi-Effects Bass Preamp features professional SWR tone, five studio-quality onboard effects taken from the award-winning SWR Mo' Bass soundstation - with new features and upg... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email

Recommended Products
Overview

The SWR Mini Mo' Analog Multi-Effects Bass Preamp features professional SWR tone, five studio-quality onboard effects taken from the award-winning SWR Mo' Bass soundstation - with new features and upgrades. Included with each Mini Mo' is the new Mo' Control 2 master footswitch.

The "Mo' Control 2" is the satellite footswitch control specifically designed for the SWR Mini Mo' bass preamp, and is included with every Mini Mo'. Mo' control 2 features individual controls for each effect, plus four banks for combining groups of effects, an all bypass switch, a tuning mute switch, and a "dual mode" switch which splits the signal into clean/dirty to individual sides (left and right) of the Mini Mo's pre- and post-master outputs.

Advanced features includes the ability to send simple midi program change commands in combination with the four preset banks and the bypass switch, 1/4" outputs for tuner out and filter sweep pedal (for easy pedal board patching capabilities when connecting a tuner or an expression pedal to control the Mini Mo's Bassynth filter sweep), and the ability to protect your presets from inadvertent reprogramming with a simple slide switch.

More pedal info
The Mo' Control 2 is specifically designed for the Mini Mo' Bass Preamp. For those interested in hands-free control of the original Mo' bass, this is not a substitute for the original Mo' Control.

For players who want to use a foot pedal to open and close the filter on the Mini Mo' "Bassynth" module, SWR recommends using the Roland EV-5 expression pedal.

FEATURES

Front panel
Dual independent input jacks compatible with both passive and active instruments
Tuning mute switch - mutes all audio outputs but tuner out
Preamp volume control with bi-color (green/red) led peak clipping indicator
Variable limiter/leveler control with yellow led indicator
Aural enhancer control
Treble level control
Midrange level control
Midrange frequency control
Bass level control
Overdrive "drive" control
Overdrive tone control
Overdrive level control
Subwave tone control
Subwave mix control
Bassynth filter control
Bassynth resonance control
Bassynth envelope control
Bassynth level control
Mo' EQ treble control
Mo' EQ midrange control
Mo' EQ bass control
Chorus depth control
Chorus level control
Chorus rate control
Push switches and unique-colored led indicators for on/off control of all effects
Internal effects bypass switch with LED indicator
Left and right external effects blend controls
Dual mode switch with LED indicator
Defeat main outs switch - mutes post-master outputs only
Left and right master volume controls
Illuminated neon power on/off switch
Stereo headphones jack

Rear panel
Pre-master audio outputs
Direct out 1/4" jack
Tuner out 1/4" jack
Mo' Bass out 1/4" jack
Direct out 1/4" XLR jack
Mo' bass out XLR jack
Line/direct switch for 1/4" and XLR direct out jacks
Individual 3-position pad switches (0 dB, -10 dB, -20 dB) for both direct
Out and Mo' Bass out XLR jacks
Ground/lift switch for both direct out and Mo' bass out XLR jacks
Stereo effects loop (left and right send and return jacks)
Internal effects bypass footswitch jack
Filter sweep pedal jack
"Mo' Control 2" footswitch jack (shown as "foot switch")
MIDI out jack

Post-master audio outputs
Two 1/4" left main output jacks
Two 1/4" right main output jacks
Two 1/4" mono main output jacks

One line fuse (3AG, 1/2 amp slow-blo)
AC power cord receptacle

Footswitch

Top row switches (left to right)
Preset group switch 1
Preset group switch 2
Preset group switch 3
Preset group switch 4
Internal effects bypass switch
Tuning mute switch

Bottom row switches
Overdrive switch
Subwave switch
Bassynth switch
Mo' EQ switch
Chorus switch
Dual mode switch

Back panel features
Filter sweep out jack
Tuner out jack
Footswitch out jack
Preset group mode switch (program/protect)
SPECIFICATIONS
Post-master audio outputs
Two 1/4" left main output jacks
Two 1/4" right main output jacks
Two 1/4" mono main output jacks

One line fuse (3AG, 1/2 amp slow-blo)
AC power cord receptacle

Sensitivity
Passive input jack: 42 millivolts
Active input jack: 84 millivolts
All line outputs: +4 dbm
Tuner out: -10dbm
Effects return jack input: +4 dbm

Dimensions
19" W x 5" H x 8" D (3 rack spaces)
Weight: 10 lbs.
Signal to noise ratio: -88 dB (<10 millivolts typical)
Equivalent input noise: 15 nanovolts per root/hertz
Input impedance: passive/active input: 1 Meg Ohms
Active input: 47K Ohms
Effects return: 27K Ohms

Output impedance
Effects sends: 220 Ohms
Tuner out: 220 Ohms
XLR balanced out (with pad switch at '0 db'): 750 Ohms

Chassis material: aluminum

Pedal

Dimensions: 17" W x 3.25 H x 8.5" D
Weight: 10 lbs.
Pro Coverage
MANUFACTURER'S WARRANTY
Warranty terms vary. Check with manufacturer for specific product warranty.


  • Customer Reviews
Loading....
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.