SKB 20" Deep Roto Shockmount Rack Case  

Item #: 
1330725129840
  • Write a Review

Based on the Ultimate Strength Series design, this 20" Deep Roto Shockmount Rack Case provides added protection for sensitive gear. With an internal frame mounted on adjustable elastomer shock absorbe... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email or Chat

Recommended Products
Overview

Based on the Ultimate Strength Series design, this 20" Deep Roto Shockmount Rack Case provides added protection for sensitive gear. With an internal frame mounted on adjustable elastomer shock absorbers on all eight corners, its revolutionary design controls the effects of shock and vibration on all three axes. The "sway" space around the internal frame provides natural air conditioning ” very important for delicate equipment. Best of all, it's less than half the weight of old fashioned wood racks.

Features
  • Rack Space Units Total: 6
  • Rear rails
  • Shock resistant
  • Roto molded for strength
  • Adjustable elastomer shock absorbers
  • Molded-in handles provide secure grasping points
  • Interlocking X-pattern for solid stackability
  • Front and rear full-size lids
  • Recessed latches
  • Shock absorbing feet
Specifications
  • Exterior Depth: 27.50", 69.85cm
    Exterior Width: 29", 73.66cm
    Exterior Height: 19.5", 49.53cm
    Carton Length: 27.5" , 69.85cm
    Carton Width: 27.75", 70.49cm
    Carton Depth: 19.5", 49.53cm
    Rack Depth Front Rail to Back Lid: 23.5", 59.69cm
    Rack Depth Front Lid To Back Lid: 27", 68.58cm
    Lid Depth: 2.25", 5.72cm
    Product Weight: 43.30lb., 19.64kg
Warranty
MANUFACTURER'S WARRANTY
All SKB hardshell cases are unconditionally guaranteed forever. That means if you break it, we will repair or replace it at no cost to you. For warranty service call 800-410-2024.


  • Customer Reviews
Loading....

Review Snapshot

by PowerReviews
SKB20" Deep Roto Shockmount Rack Case
 
5.0

(based on 1 review)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 1 customer

Displaying review 1

Back to Top

(4 of 4 customers found this review helpful)

 
5.0

Great for the Ampeg SVT2-Pro

By Skip

from Bethlehem, PA

Comments about SKB 20" Deep Roto Shockmount Rack Case:

I picked up this 6U rack for my new Ampeg SVT2-Pro. The SVT2-Pro needs room to vent the heat of all those tubes! This rack will prevent premature heat failure due to SKB�ۡ���s open shock design. At the tightest point internally is 1.5�ۡ�ݕ�_ on all sides. This provides plenty of breathing room for the SVT. Down side is the size of the rack, which is 27�ۡ�ݕ�_ wide outside. The height will depend, on my 6 space (6U) the height is 19�ۡ�ݕ�_ due to the design of the exterior feet and top case geometry. This is a full 20�ۡ�ݕ�_ deep rack with threaded rack mounts front and back. SKB did take some time on delivery.

Displaying review 1

Back to Top

You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.