Roland IK Multimedia: T-RackS VS Plug-In

All the necessary tools for professional analog mastering.

IK Multimedia: T-RackS VS is the premier analog mastering software suite for Roland VS hard disk recording systems with the VS8F-3 Expansion Board. All processing including EQs and Dynamics is based on physically modeled analog sounds from rare vintage hardware mastering equipment. This high-quality processing makes T-RackS easy to use and results in highly-professional sounding mixes.

Roland IK Multimedia: T-RackS VS Plug-In Features:

Mastering Equalizer:
Six filters with different filter shaping characteristics all specially developed for mastering:
4th order High-pass filter from 18 Hz to 4 kHz.
Low shelving type filter from 30 Hz to 800 Hz.
Low-mid peaking type filter from 30 Hz to 5 kHz with Lo and Hi Q selection.
High-mid peaking type filter from 200 Hz to 18 kHz with Lo and Hi Q selection.
High shelving type filter from 750 kHz to 10 kHz.
4th order Low-pass filter from 200 Hz to 20 kHz.
The T-RackS VS Mastering Equalizer Controls:
Equalizer BYPASS
Filters Range switch allows you to select if the EQ bands will have a plus/minus 7.5 dB or plus/minus 15 dB range. IN 7.5 dB range the EQ will work in double precision mode.
Bands On/Off switches
High Pass Filter
Low Pass Filter
Low Shelving Gain
Low Shelving Frequency
Lo-Mid Gain
Lo-Mid Frequency
Lo-Mid Bandwitdh
Hi-Mid Gain
Hi-Mid Frequency
Hi-Mid Bandwitdh
High Shelving Gain
High Shelving Frequency
FLAT Button
LINK Switches
Equalizer Response Display
Output Peak Meter
OUT Gain
Mastering Dynamics:
Tube Compressor is very flexible and emulates those classic analog hi end vintage gear used in mastering applications.
Tube Compressor Controls:
Bypass
Drive
Sidechain filter
Attack Time
Release Time
Compressor Ratio
Stereo Image
Output Level
Gain Reduction Meter
Multiband Peak Limiter:
The 3-band peak limiter's action works separately on three bands (low mid high) and can make the mix even louder by limiting unwanted peaks.
Multiband Peak Limiter Controls:
Multiband Limiter Bypass switch
Bands Threshold
Bands Level
Limiter Release
Limiter Overload
CrossOver Points
Limiter Drive
Gain Reduction Meter
Output Stage
Shape and clip the signal from the Compressor and Limiter to a maximum level of 0.05 dB. It also includes a high precision peak level meter on the final master output signal.
Output Stage Controls:
Clipping
OUT Level
Final Master Peak Meter