The Radial Engineering ProRMP is a 100% passive re-amplifier that takes a prerecorded track and re-amplifies it through a guitar amp or effects pedal creating new and exciting tones. Re-amping has bee... Read More
The Radial Engineering ProRMP is a 100% passive re-amplifier that takes a prerecorded track and re-amplifies it through a guitar amp or effects pedal creating new and exciting tones. Re-amping has been the "secret weapon" for countless recordings by the biggest names in the business and the process is often used on guitars, bass, keyboards, percussion, and even voice to create new textures!
Plug and play and easy to use, the ProRMP Studio Direct Box connects from the recorder to your amp and effects units and does all the impedance matching for you. Just adjust the level to suit!
The magic behind the Radial Engineering ProRMP's great tone is a custom-wound transformer that at once converts the balanced Low-Z source to a Hi-Z input for your amp while also acting as an electrical isolator to eliminate troublesome ground loops that can often cause buzz and hum in the sound.
Like all Radial products, the ProRMP is built tough. Encased in a 14 gauge steel, the ProRMP employs a unique bookend design with a welded I-beam frame that protects it from damage and assures the PC board and solder points will not be stressed, adding durability. A full-bottom no-slip pad works double duty by providing plenty of stay put while also eliminating electrical contact points from guitar amp chassis bolts that could cause ground loops.
The Radial ProRMP direct box gives you affordable professional re-amping for every recording studio.
Plug a standard balanced cable from your recorder or mixer output to the ProRMP's XLR input. Connect the 1/4" ProRMP output to your instrument amp. Adjust the ProRMP's output level control as required to match the amp input and engage the ground lift switch to eliminate any hum and buzz caused by ground loops.
GUITAR CENTER'S PRO COVERAGE
Pro Coverage gives you added warranty protection for your new gear. Stepping in where the manufacturer's "normal wear and tear" coverage ends, our Pro Coverage program offers you upgraded coverage if your product ever fails Read More.
Reviewed by 1 customer
Displaying review 1
Comments about Radial Engineering Pro RMP Passive Reamping Direct Box:
I struggled initially to get good sound, but this had nothing to do with the re-amp box (Interface setup was the cause). Once I figured it out, I A/B'd my guitar straight into amp and the re-amp playback, I found that they are close enough that without the guitar reference at the same time, I would not be able to tell the difference between the two, and I am recording the dry signal directly into interface (no DI box), Though so far I have not been able to re-amp and use the cabinet simulation direct out from my amp without getting a terrible high pitch hum which I don't understand, not sure that anyone would ever try to use the re-amp in this manner but just thought I'd mention it. Just using the amp and re-amp is a thumbs up.