The Radial PowerPre Microphone Preamp is one of the eight modules designed to be comprise the Radial Workhorse Rack and Mixer System that combines the popular 500 series platform with an incredibly fl... Click To Read More About This Product
We're sorry—we no longer carry this item.
Find a similar product below or contact us for a recommendation of a great alternative.
The Radial PowerPre Microphone Preamp is one of the eight modules designed to be comprise the Radial Workhorse Rack and Mixer System that combines the popular 500 series platform with an incredibly flexible patching system to let you create the ultimate studio environment.
The Radial PowerPre is a high performance microphone preamplifier designed to be used with the Radial Workhorse and other 500 series modular racks. It features 100% discrete components for optimal signal transfer and employs a 'vintage' Hammond broadcast output transformer for warmth and exceptionally smooth tone.
The design begins with a front mounted XLR for instant connectivity plus a recessed 48V phantom power switch for safety. Unlike most mic preamps that require careful gain adjustment to avoid troublesome noise, the PowerPre is equipped with the newly developed AccuState input stage that automatically optimizes signal-to-noise at all levels with up to 55dB of gain. This is supported with a full 10 segment LED meter for precise signal monitoring.
To add extra character; a 3-position Vox control lets you set the PowerPre to 'breath' for added high frequency air such as when accentuating a vocal track or adding harmonic content to an acoustic guitar. The 'punch' setting adds body when recording electric guitar or can be used to fatten a voice. When set to linear, the PowerPre delivers a truly natural rendering for orchestral recording that will suit the most demanding purist. This is augmented with a gentle high-pass filter that helps control low end resonance when layering acoustic instruments.
Hand selected 100% discrete electronics
Hammond broadcast transformer output
AccuState low-noise input circuit
3-position Vox control for added air or punch
Microphone Input: Circuit type: 100% discrete, transformer coupled output Microphone Input: Accustate input fully variable gain control Current draw: 130mA (maximum draw) Frequency response: 20Hz 20KHz +0/-1dB Input Impedance: 2.2kÎ (1.5kÎ with pad) Mic preamp gain: +55dB Maximum gain: +70dB when used with Workhorse Maximum output: +22dBu Output impedance: 75O @ 1kHz Output type: Transformer isolated Common mode rejection (CMRR): >75dB Equivalent Input Noise (EIN): -122dBu @ maximum gain Dynamic range: >97dB Total Harmonic Distortion (THD+N): 0.03% @ mid gain with +10dBu output Intermodulation distortion (IMD): 0.012% @ 50dB gain with +10dBu output
Instrument Input: Omniport input Impedance: 150kÎ, unbalanced Instrument preamp gain: +55dB, unbalanced Equivalent Input Noise (EIN): -95dBu, unbalanced Total Harmonic Distortion (THD+N): 0.05% @ mid gain with +10dB output
Control Panel: Meter: 10 segment peak indicator with hold Pad: -15dB Polarity: Inverts pins 2 and 3 at XLR input High-pass filter: 150Hz cut off, -3dB @ 100Hz Vox Control: 3 position preset EQ Phantom power: 48VDC - 10mA (as supplied by 500 frame) XLR configuration: AES spec: pin-1 ground, pin-2 (+), pin-3 (-) Ground lift (rear panel): Lifts ground on front panel XLR input only
Mechanical: Weight: 1.5lb. (0.7Kg) Shipping size: 9 x 6.5 x 2 (inches) Compliance (API): Yes Compliance (WHOS-Doc): Yes Warranty: 3 years, transferables
90 day warranty on footswitch and tubes. One year warranty on all other products.
You are changing the Ship-To country.
Our product catalog varies by country due to manufacturer
restrictions. If you change the Ship-To country, some or
all of the items in your cart may not ship to the