R0DE Classic II Microphone with Flight Case

The Classic II when classic performance is needed.

The RODE Classic II tube microphone is a classic from its custom-designed Jensen transformer to the dual pressure-gradient transducer. Machined from solid brass, hand polished, glass bead-blasted, and coated in satin nickel, The RODE Classic II has Class A valve circuitry that gives unmatched warmth, clarity, and sensitivity when critical vocal and instrument recording is required. Requires phantom power.

R0DE Classic II Microphone with Flight Case Features:

Class A valve circuitry
Dedicated power supply
6072 twin triode
New "edge-terminated" gold-sputtered diaphragm
Custom-designed Jensen transformer
-10dB and -20dB pads (switched from power supply)
2-position high-pass filter (switched from power supply)
9 polar patterns (switched from power supply)
Double-shielded, oxygen-free copper multicore cable with custom-designed heavy-duty plugs and sockets
Capsule: externally polarized 18" dual-diaphragm condenser
Active electronics: thermionic impedance converter
Pickup pattern: switchable omnidirectional/cardioid/figure-8 in 9 steps
Frequency response: 20Hz-20kHz
High-pass filter: switchable: flat, -15dB @ 20Hz, -21dB @ 20Hz. Cascaded first-order filters
Output impedance: 200 ohms
Sensitivity: -37dB re 1 volt/Pa (14mV @ 94dB SPL) ±2dB
Equivalent noise: <18 dBA ("A"-weighted per 'IEC268-15)
Maximum output: +2dBu (@ 1% THD into 1K)
Dynamic range: >113dB (per IEC268-15)
Maximum SPL: 131dB SPL (@ 1% THD into 1K)
Signal/noise ratio: >76dB (per IEC268-15)
Power requirements: dedicated power supply (110 ~ 120V/220 ~ 240V, 50/60 Hz) Weight: 1.3 lbs.

R0DE Classic II Microphone with Flight Case Specifications: