High power and QSC reliability.

The HPR122i offers performers and audio professionals the power, technology, and legendary reliability of QSC amplification combined with the simplicity and convenience of a multipurpose powered loudspeaker system. Whether your application is vocal reinforcement, dance music, or full tilt rock-and-roll, or whether your need is main PA, or stage monitor, suspended or pole mounted, the QSC HPR122i Loudspeaker is your solution. With 131 dB of maximum output the HPR122i outperforms molded plastic box systems without significant additional weight or cost.

A 12" low-frequency woofer with 3" voice coil is powered by 400W of Class H power. A neodymium magnet design provides ample motor strength for low-end performance without adding unnecessary weight. The 1.4" diaphragm neodymium compression driver is powered by a 100W class AB+B amplifier and is loaded on a 75 degree conical horn.

With our Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!

QSC HPR122i POWERED SPEAKER 12-INCH 2-WAY Features:

Ideally suited for use as main PA speaker or audio monitor
High continuous power: 500 watts total amplifier power
75 degree conical horn provides predictable coverage regardless of cabinet orientation
Nine M10 suspension points allow for multiple suspended applications

QSC HPR122i POWERED SPEAKER 12-INCH 2-WAY Specifications:

Configuration: 12" 2-way multipurpose powered loudspeaker
Transducers: Low Frequency 12" neodymium transducer with 3" voice coil
High Frequency 1.4" diaphragm compression driver
Frequency Response: (-3 dB): 62 Hz - 18 kHz
Frequency Range: (-10 dB): 53 Hz - 22 kHz
Nominal coverage: (-6 dB) : 75 degree conical
Maximum SPL (1 meter): 131 dB peak

Amplifier
Power output: 400W LF Class H 100W HF Class AB+B
Input impedance: 22k balanced, 11k unbalanced
Controls: Gain, Low-cut filter (Main / Monitor), Front LED On/Off, Power, Circuit breaker
Indicators: Power, Signal, Limit
Cooling: Convection
Amplifier protection: Thermal and output power limiting, Output short circuit,
Overtemperature muting, Driver DC protection
Current consumption at 120 VAC(1/8 power EIA noise): 1.5A
Enclosure: Painted Birch plywood
Finish: Black textured paint
Grille: Powder coated 16 gauge steel
Suspension/Attachment Points: 9 M10 rigging locations
Connectors: Balanced female XLR line level input, Balanced male XLR full range line level out
Dimensions: 26.9 " H x 14.7 " W x 14.9 " D (683 mm x 373 mm x 379 mm)
Net weight: 60 lbs. / 27.2 kg