Provides 1,000W at 4 ohms in a lightweight design with special protection technology.
The GX7 professional power amplifier continues in the tradition of QSC's top-selling GX Series professional power amplifiers by offering an attractive combination of power, fidelity, configurability, long-term reliability, and overall value.
At the heart of the GX7 is an all-new, advanced power supply based on the road-proven PowerLight Series technology. The result is a more overall power output in a lightweight casing compared to previous GX models—without any sacrifice in audio quality.
At 1000W per channel at 4 ohms, the GX7 provides more than ample power to connect up to four 500W 15" 2-way speakers or two 1000W subwoofers at a time. This will help to keep your overall system cost down while still maintaining maximum performance levels. The 8 ohm output is 725 watts per channel which yields considerable headroom and increased dynamic range for today's popular loudspeakers.
With our
Guaranteed Lowest Price, you can be assured of complete satisfaction and the lowest available price, or your money back!
QSC GX7 Stereo Power Amplifier Features:
- Road-proven PowerLight Series amplifier technology
GuardRail (also found in K and KW Series loudspeakers) protects both the amp and speakers from damaging clipping and overload without audible pumping or distortion
Subwoofer/Satellite crossover built-in
Inputs: XLR, 1/4" TRS, and phono input connectors for compatibility with any source
Minimum depth chassis (10.1"/257mm) fits in compact, inexpensive effects racks
Outputs: Speakon combo accepts 1/4" (TS) plugs or Speakon 2-pole and 4-pole plugs (connects 2 poles only). Binding posts support all other speaker wiring systems
Front panel LEDs monitor Power, Signal, and Clipping
Lightweight
QSC GX7 Stereo Power Amplifier Specifications:
- Power Rating:
8Ω / both channels driven / 1 kHz: 725W
8Ω / single channel driven / 1 kHz: 800W
4Ω / both channels driven / 1 kHz; 1,000W
4Ω / single channel driven / 1 kHz; 1,200W
Distortion (typical): 20 Hz - 20 kHz: 1 dB below rated power 8Ω: less than 0.02% / 4Ω: less than 0.05%
Signal to Noise: (20 Hz - 20 kHz) 100dB
Input Sensitivity: 1.2 Vrms
Voltage Gain: (8Ω) 33.1dB
Output Circuitry: 2-tier Class H
Power Requirements: (1/8 power, pink noise at 4Ω, 120 V): 10.1A
Frequency Response: 20 Hz - 20 kHz, +0, 1 dB
Dynamic Headroom (4Ω): 2dB
Input Impedance (Ω): Greater than 20k (balanced)
Maximum Input Level: +24 dB (16 Vrms)
Input Connectors (each channel): 3-pin XLR and 1/4" TRS, balanced, parallel Phono, unbalanced
Output Connectors (each channel) Speakon®, 1/4", Binding Posts
Amplifier and Load Protection: Short circuit, open circuit, thermal, RF protection
Load protected against DC faults
Front Panel Controls and Indicators: Gain controls, 21 detents
Red Clip LEDs, proportional, 0.1% THD threshold
Green Signal LEDs, threshold -35 dB
Blue Power LED, AC on
Rear Panel Controls: Full Range / Crossover switch
100 Hz, 3rd order LP (sub), 2nd order HP (top)
Amplifier dimensions (HxWxD): 3.5" (2RU) x 19" x 10.1" (89mm x 483mm x 257mm)
Carton Dimensions (HxWxD): 5.75" x 23" x 14" (146mm x 584mm x 355mm)
Net Weight: 15.5lb. (7kg)
(Based on 
Based on 
