This package consists of a Presonus Studiolive 16.0.2 digital mixing console along with a pair of QSC K10 powered PA speakers. A pair of standard speaker stands, 2 TRS cables, 4 Digital Reference DRV1... Click To Read More About This Product
This package consists of a Presonus Studiolive 16.0.2 digital mixing console along with a pair of QSC K10 powered PA speakers. A pair of standard speaker stands, 2 TRS cables, 4 Digital Reference DRV100 mics and 4 XLR cables are included as well.
Presonus StudioLive 16.0.2 Mixer
With a "footprint" of less than 2 square feet, the compact, 16-channel StudioLive 16.0.2 offers 8 mono input channels and 4 stereo channels and provides 12 XMAX Class A solid-state mic preamps. Packed with features and processing power, the 16.0.2 employs the same workflow and easy-to-use mixing-surface design as the bigger (16.4.2 and 24.4.2) StudioLive boards, and sounds every bit as good, with the same high-definition, wide-dynamic-range, digital converters. The 16.0.2 integrates a 16x16 FireWire interface and comes with Capture, Studio One Artist recording and production software, and Virtual StudioLive, bidirectional control software.
The 16.0.2's Fat Channel features compressors, limiters, gates, phase reverse, high-pass filters, and 3-band semi-parametric EQ. Two stereo, 32-bit floating-point effects processors deliver delay and reverb effects.
Moreover, a glance at the rear panel reveals that the 16.0.2 even offers something its two big brothers do not: MIDI In and Out. You can recall Scenes from a DAW using MIDI Program Changes, control the main output volume and effects level, and even mute effects between songs.
Two factors work against getting that Perfect Mix with an analog mixer. First, the Perfect Mix can be hard to reproduce a week, day, or hour after you perfect it. And second, a good mix should be dynamic: levels, effects, and EQ should be tailored to each song or segment of the show, service, or presentation. StudioLive solves this problem by letting you save all of your digital settings for quick setup and recall.
The QSC K10 10" powered loudspeaker, featuring its revolutionary 1000W power module, delivers the high-quality amplification, HF driver, and low-frequency driver of the K-Series speakers, offering 90 conical coverage and 129dB peak output, low frequencies extending to 56Hz. The K10 offers exceptional power and performance from an extremely compact system, and it can also be used as an ultra low-profile, horizontal wedge or side fill.
QSC's K10 PA speaker features a 1-3/4" HF device in its 2-way enclosure. The primary differentiator in K-series speakers is the resulting output dispersion-the K8 being the widest at 105 and the K12 the narrowest at 75. This radical approach is achievable due to a process called Directivity Matched Transition (DMT). DMT allows QSC to take advantage of a fundamental law of acoustics: smaller diameter woofers have wider coverage patterns than larger ones. The K Series matches the HF device to the LF dispersion, allowing for the smoothest and flattest frequency response possible across the entire sound field.
Add to this advanced DSP processing and an enclosure molded from ABS-a material far more rugged and sonically pleasing than conventional plastics-and the K Series delivers exceptional performance in this category of loudspeakers.
GUITAR CENTER'S PRO COVERAGE
Pro Coverage gives you added warranty protection for your gear. Stepping in where the manufacturer's "normal wear and tear" coverage ends, our Pro Coverage program offers you upgraded coverage if your product ever fails Click To Read More About This Product.