This Phonic live sound package matches two S710 speakers and a MAX 1000 power amplifier with Gear One Speakon-to-1/4" speaker cables to hook them up.
Phonic S710 The Phonic S710 is a 2-way speaker that gives you more power for your money. Power handling reaches 160W on peak, or 80W on Program. The S710 speaker is a starter unit that features a 10" heavy-duty woofer, and piezo tweeter. You can use the Phonic S710 both as a floor monitor or mounted as a raised sound reinforcement speaker.
Phonic MAX 1000 Power Amplifier The Phonic MAX 1000 Power Amplifier delivers 600 Watts of power at 8 ohms (bridge mono), 300W of power at 4 ohms (stereo)-ideal for small- to medium-size venues like churches, auditoriums, and more. Input to the MAX 1000 is achieved via XLR or phone jack, and output is achieved through either Speakon-type connectors or binding posts. The MAX 1000 features ground switches, and the option to choose between stereo, parallel and bridge operating modes, making it an affordable amplifier that is exceptional for real-world application.
Gear One Speakon to 1/4" speaker cable This 16-gauge speaker cable is 25 feet in length and features a Speakon connector on one end and a 1/4" connector on the other. This package includes a set of 2.
Use as a floor monitor or mounted as a raised sound reinforcement speaker
10" heavy-duty woofer and piezo tweeter
Dual 1/4" phone jacks
35mm stand adapter built-in
Phonic MAX 1000 Power Amplifier
High-current toroidal transformers for greater power and low noise
Balanced 1/4" TRS and XLR inputs for maximum flexibility
Grounding / Floating switch to avoid grounding loop
Binding post and Speakon-type outputs
Front mounted gain controls for easy access
Signal and Peak LED indicators to monitor performance
Short circuit, thermal, subsonic, RF protection, output DC offset
Phonic S710 Power handling: 160W (Peak); 80W (Program) Frequency response: 65Hz - 20kHz High sound pressure level: 96 dB SPL @ 1W / 1M 8 Ohm nominal load
Output circuitry: Class H Input Sensitivity @ 8 ohms: 1.23V (+4dBu) Distortion (SMPTE-IM): <0.01% Noise (unweighted 20Hz - 20 kHz below rated output): 100dB Damping Factor: >300 @ 8 ohms Frequency Response: 20 Hz-20kHz, +0/-1dB points: 5Hz-50kHz Input Impedance: 20 kOhm balanced, 10kOhm unbalanced Cooling: Continuous variable-speed fan, front-to-rear air flow Input: XLR and 1/4" TRS Output: Speakon and binding posts LED Indicators: Blue Power, Green Signal, Red Peak
Controls: Front Panel: CH1 and CH2 GAIN knobs with 41 detents Rear Panel: Parallel, Bridge, and Stereo Operation Mode side switches, floating on/off switch, and Current-Break reset button Protection Circuitry: Short circuit, thermal, subsonic, RF, output DC offset, power on/off muting
Power Consumption: 600W Power Requirement (depends on region): 100120VAC, 220240VAC, 50/60Hz Dimensions: 19" W x 3.46" H x 15.9" D Weight: 33lb.
You are changing the Ship-To country.
Our product catalog varies by country due to manufacturer
restrictions. If you change the Ship-To country, some or
all of the items in your cart may not ship to the