Skip to main content

Phonic AM 844D Mixer with USB Interface

Item #: 
  • Write a Review

The Phonic AM 844D mixers is a compact and versatile mixing solution with 8 Mic/Line mono channels and 4 stereo inputs, two of which have microphone inputs. Ultra low noise pre-amps ensure high qualit... Click To Read More About This Product

We're sorry—we no longer carry this item.

Find a similar product below or contact us for a recommendation of a great alternative.

Call: 866-498-7882 Email

Recommended Products

The Phonic AM 844D mixers is a compact and versatile mixing solution with 8 Mic/Line mono channels and 4 stereo inputs, two of which have microphone inputs. Ultra low noise pre-amps ensure high quality sound when used in project studios or sound reinforcement. Low-cut filters on mono channels eliminate unwanted sounds like stage rumble, P-pops, wind noise and low frequency recording studio room resonances. The multi-band EQ on mono channels gives you total control over your mix. The AM series also makes monitoring the mix easy with its dual multi-segment LED level meters and high volume headphone outputs.


8 Mic/Line Mono channels
4 stereo channels (two with Mic input)
10 Mic preamps
Direct Outputs for Multitrack recording
3 band EQ with swept mid range plus low cut on each mono channel
18dB/oct, 75Hz Loc Cut Filter on each mic channels
4 AUX Sends, AUX 1 & 2 with Pre/Post selector
32/40-bit digital stereo multi-effect processor with 100 programs, tap-delay and test-tones
4 stereo AUX Returns
Solo selector on each input channel
CTRL RM Phones with multi input source matrix selector
8 Subgroups with Fader control and L-R assign buttons
Record Output
2T return with control level and TO MAIN L/R assign button
Built-in switching power supply with universal connector, 90-260VAC, 50/60Hz
12V XLR Connector for gooseneck lamp
Solo switch selector for AUX Returns
Inputs Total channels: 12
Balanced mono mic/line channel: 8
Balanced mic/stereo line channel: 2
Balanced stereo line channel: 2
AUX return: 4 stereo
2T input: Mini stereo and stereo RCA

Outputs Main L/R stereo: 2 x 1/4" (6.4 mm) TRS, Bal. & 2 x XLR
Group: 8
Rec out: Mini stereo and stereo RCA
CTRL RM L/R: 2 x 1/4" (6.4mm) TS
Phones: 2

Channel Channel strips: 12
EFX send: 4
Pan/balance control: yes
Volume controls: 2.4" (60mm) fader
Inserts: 8

Level Control: Phones level control: yes
Main L/R level control: 2.4" (60mm) fader
Level meter: 13-segment
Phantom power supply: +48V DC

Freq. Response: (Rec/Repro) 20Hz-60KHz: +0/-1 dB
20Hz-100KHz: +0/-3 dB

Crosstalk Crosstalk (1KHz @ 0dBu, 20Hz-20KHz bandwidth, channel in to main L/R outputs)
Channel fader down, other channels at unity <-90 dB

Noise: 20Hz-20KHz; measured at main output, Channels 1-4 unit gain; EQ flat; all channels on main mix; channels 1/3 as far left as possible, channels 2/4 as far right as possible. Reference= +6dBu
Master @ unity, channel fader down: -86.5 dBu
Master @ unity, channel fader @ unity: -84 dBu
S/N ratio, ref to +4: >90 dB

Microphone: Microphone preamp E.I.N. (150 ohms terminated, max gain) <-129.5 dBm
THD: Any output, 1KHz @ +14dBu, 20Hz-20KHz, channel inputs <0.005%
CMRR: 1 KHz @ -60dBu, gain at maximum 80dB

Maximum Input/Output Level Mic preamp input: +10dBu
All other input: +22dBu
Balanced output: +28dBu

Impedance: Mic preamp input: 2 kohms
All other input (except insert): 10 kohms
RCA 2T output: 1.1 kohms

Equalization: Equalization: 3-band, +/-15dB
Low EQ: 80Hz
Mid EQ: 100-8kHz, sweepable
L-mid EQ: 800Hz
H-mid EQ: 3kHz
Hi EQ: 12kHz

Filter: Low cut filter: 75Hz (-18 dB/oct)

USB: USB audio: Stereo in/out
Connector type: USB Type B
Bitrate: 16-bit
Sampling rate: 48kHz Digital effect processor: 100 effects with tap delay control and test tones
Footswitch: EFX on/off

Power Requirements: 100-240 VAC, 50/60Hz
Dimensions (WxHxD)" 16.5 x 5.9 x 16.5" (418 x 149.5 x 420mm)
Weight: 13 lb. (5.9kg)
  • Customer Reviews
You are changing the Ship-To country.

Our product catalog varies by country due to manufacturer restrictions. If you change the Ship-To country, some or all of the items in your cart may not ship to the new destination.